Home
>
Digital Projection
>
Projector
>
Digital Projection Projector E-Vision 6800 3D Series User Manual
Digital Projection Projector E-Vision 6800 3D Series User Manual
Have a look at the manual Digital Projection Projector E-Vision 6800 3D Series User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 577 Digital Projection manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 10
page 4
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Control panel and indicators
Some of the controls from the remote control are duplicated on the proje\
ctor control panel, as shown
on the right.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC buttons on
the remote control.
The Power indicator will show amber when in standby and green when the projector \
is on, and will
flash when the projector is warming up or cooling down.
The Warning indicator...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-9.png "Page 10
page 4
Installation and Quick-Start Guide
GETTING TO KNOW THE PROJECTOR
Control panel and indicators
Some of the controls from the remote control are duplicated on the proje\
ctor control panel, as shown
on the right.
The SOURCE and AUTO buttons have the same function as the INPUT and AUTO SYNC buttons on
the remote control.
The Power indicator will show amber when in standby and green when the projector \
is on, and will
flash when the projector is warming up or cooling down.
The Warning indicator...")
![Page 11
page 5
Installation and Quick-Start Guide
CHANGING THE LENS, LAMPS AND COLOR WHEEL
Changing The Lens, Lamps And Color Wheel
Removing the lens
1. Remove the lens cap.
2. Push in the lens release lever, and turn the lens anti-clockwise.
3. Remove the lens.
Fitting the lens
1. Position the lens so that the label marked ‘O’ is at the top, push in the lens release lever and and gently insert the\
lens all the way into the
lens mount.
2. Turn the lens clockwise until it clicks into place.
12
Notes
Always...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-10.png "Page 11
page 5
Installation and Quick-Start Guide
CHANGING THE LENS, LAMPS AND COLOR WHEEL
Changing The Lens, Lamps And Color Wheel
Removing the lens
1. Remove the lens cap.
2. Push in the lens release lever, and turn the lens anti-clockwise.
3. Remove the lens.
Fitting the lens
1. Position the lens so that the label marked ‘O’ is at the top, push in the lens release lever and and gently insert the\
lens all the way into the
lens mount.
2. Turn the lens clockwise until it clicks into place.
12
Notes
Always...")
![Page 14
page 8
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing\
by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that
the projector is level, and perpendicular to the screen.
Alternatively, five M4 bolts (max length 12 mm [0.5 in]) can be used to attach the...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-13.png "Page 14
page 8
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing\
by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that
the projector is level, and perpendicular to the screen.
Alternatively, five M4 bolts (max length 12 mm [0.5 in]) can be used to attach the...")
![Page 16
page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the lens so that the image fills the screen.
Focus
• Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the len\
s until the image is sharp.
Shift
• Use the LENS SHIFT arrow buttons on the control panel to adjust the position of the image,\
or press the LENS SHIFT button on the remote control then use...](http://img.usermanuals.tech/thumb/5761/99753/w64_projector_manual_8676_d-15.png "Page 16
page 10
Installation and Quick-Start Guide
OPERATING THE PROJECTOR
Adjusting the lens
Zoom
• Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the lens so that the image fills the screen.
Focus
• Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the len\
s until the image is sharp.
Shift
• Use the LENS SHIFT arrow buttons on the control panel to adjust the position of the image,\
or press the LENS SHIFT button on the remote control then use...")
page 5 Installation and Quick-Start Guide CHANGING THE LENS, LAMPS AND COLOR WHEEL Changing The Lens, Lamps And Color Wheel Removing the lens 1. Remove the lens cap. 2. Push in the lens release lever, and turn the lens anti-clockwise. 3. Remove the lens. Fitting the lens 1. Position the lens so that the label marked ‘O’ is at the top, push in the lens release lever and and gently insert the\ lens all the way into the lens mount. 2. Turn the lens clockwise until it clicks into place. 12 Notes Always allow the lamp to cool for 5 minutes before: - disconnecting the power - moving the projector The projector lens is shipped separately. 1 2 3 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 6 Installation and Quick-Start Guide CHANGING THE LENS, LAMPS AND COLOR WHEEL Changing the lamp 1. Slide open the lamp compartment cover as shown in the picture. 2. Unscrew the two captive screws securing the lamp module. 3. Pull firmly upwards on the handle to remove the lamp module. 4. Insert a new lamp module. 5. Fasten the screws. 6. Replace the lamp compartment cover. 123 Notes Always allow the lamp to cool for 5 minutes before: - disconnecting the power - moving the projector The lamp must be changed only by suitably qualified personnel. The projector will shut down if the cover is opened whilst in operation. The filters should be changed at the same time as the lamp is changed. 456 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 7 Installation and Quick-Start Guide CHANGING THE LENS, LAMPS AND COLOR WHEEL Changing the color wheel 1. Slide open the lamp compartment cover as shown in the picture. 2. Unscrew the four captive screws securing the color wheel. 3. Remove the color wheel. 4. Insert a new color wheel. 5. Fasten the screws. 6. Replace the lamp compartment cover. 456 321 Notes Always allow the lamp to cool for 5 minutes before: - disconnecting the power - moving the projector The color wheel must be changed only by suitably qualified personnel. The projector will shut down if the cover is opened whilst in operation. Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 8 Installation and Quick-Start Guide POSITIONING THE SCREEN AND PROJECTOR Positioning The Screen And Projector 1. Install the screen, ensuring that it is in the best position for viewing\ by your audience. 2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that the projector is level, and perpendicular to the screen. Alternatively, five M4 bolts (max length 12 mm [0.5 in]) can be used to attach the projector to a ceiling mount (optional accessory,). Location of the ceiling mount holes at the bottom of the projector 12 3 4 5 Notes Always allow the lamp to cool for 5 minutes before: - disconnecting the power - moving the projector Ensure that there is at least 50cm (20in) of space between the ventilation outlets and any wall, and 10cm (4in) on all other sides. If ceiling mounting, ensure there is 30cm (12in) of space between the projector and ceiling. Do not stack the projectors. Do not tilt the projector more than ±10° from side to side when in use, as this may cause serious lamp failure, damage the lamp module and cause extra cost on replacement. ±10°±360° Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 9 Installation and Quick-Start Guide OPERATING THE PROJECTOR Operating The Projector Switching the projector on • Connect the power cable between the mains supply and the projector. Switch on at the switch next to the power connector. • Wait until the self-test has completed and the Power indicator on the projector control panel shows amber. The lamp will be off and the projector will be in STANDBY mode. • Press on the control panel or POWER ON on the remote control. The Power indicator on the control panel will flash green for a few seconds whilst the lamp comes up to full brightness. When the projector is ready for use, the Power indicator will show steady green. Selecting an input signal or test pattern Input signal • Connect an image source to the projector. The signal should be automatically detected by the projector, and should be displayed within a two or three seconds. • If more than one signal is connected, then select the image you want to \ display: Press SOURCE on the control panel to cycle through the inputs, or press INPUT on the remote control, then use the LEFT and RIGHT arrow buttons to cycle through the inputs. Test pattern To display a test pattern, do either of the following: • Press TEST PATTERN on the remote control, then use the LEFT and RIGHT arrow buttons to cycle through the patterns, • Use the OSD (On-screen Display): 1. Open the Main menu, highlight Test Pattern and press ENTER to open the list of available test paterns. 2. Use the UP and DOWN arrow buttons to highlight the test pattern you wish to display and pre\ ss ENTER. Notes Before switching on the projector for the first time, make sure the electric circuit is grounded. Poor grounding may damage the projector. Always allow the lamp to cool for 5 minutes before: - disconnecting the power - moving the projector For full details of how to connect an image source to the projector, see the Connection Guide . For full details of how to use the controls and the menu system, see the Operating Guide . Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 10 Installation and Quick-Start Guide OPERATING THE PROJECTOR Adjusting the lens Zoom • Use the ZOOM +/− buttons on the control panel or on the remote control to adjust the lens so that the image fills the screen. Focus • Use the FOCUS +/− buttons on the control panel or on the remote control to adjust the len\ s until the image is sharp. Shift • Use the LENS SHIFT arrow buttons on the control panel to adjust the position of the image,\ or press the LENS SHIFT button on the remote control then use the arrow buttons to adjust the p\ osition of the image. Adjusting the image Orientation • Use the Orientation settings in the Setup menu. Aspect ratio • Press the ASPECT button on the remote control to cycle through all the available setting\ s. or use the Aspect Ratio setting in the Geometr y menu. Picture • Press PICTURE on the remote control to open the Image menu, then use the sliders to adjust brightness, contract etc. Notes For full details of how to use the controls and the menu system, see the Operating Guide . Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
page 11 Installation and Quick-Start Guide OPERATING THE PROJECTOR Switching the projector off • Press on the control panel or STANDBY on the remote control, then press the button a second time within 5 seconds to confirm your intention to switch off. The lamp will go off, and the Power indicator on the control panel will flash amber for a few seconds whilst the lamp cools. The Power indicator on the control panel will then show amber and the projector wi\ ll be in Standby mode. • Switch off at the switch next to the power connector. Disconnect the power cable from the projector. Notes Always allow the lamp to cool for 5 minutes before: - disconnecting the power - moving the projector Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015
Installation and Quick-Start Guide Digital Projection E-Vision 6800 3D Series This page is intentionally left blank.
LENS SHIFTZOOM –FOCUS+ MENU ENTER RETURN SOURCE POWER WARNING LAMP1LAMP2AU TO CONNECTION GUIDE4 Rev A Januar y 2015 E-Vision 6800 3D Series High Brightness Digital Video Projector
Connection Guide IN THIS GUIDE IN THIS GUIDE Signal Inputs And Outputs ........................................................................\ .....15 Supported Signal Input Modes .....................................................................16 2D input modes .........................................................................................................16 3D input modes .........................................................................................................18 Control Connections ........................................................................\ ................20 Digital Projection E-Vision 6800 3D Series Rev A Januar y 2015