Digital Projection Projector E-Vision 6800 3D Series User Manual

page 55
Remote Communications Guide
COMMAND GUIDE

Color menu
color.space= ?0  = Auto 
1 = YPbPr 
2 = YCbCr 
3 = RGB-PC 
4 = RGB-Video
color.temp= ?0 = Native 
1 = 5500K 
2 = 6500K 
3 = 7800K 
4 = 9300K
red.lift= ?0 to 200 (integer)
red.gain= ?0 to 200 (integer)
green.lift= ?0 to 200 (integer)
green.gain= ?0 to 200 (integer)
blue.lift= ?0 to 200 (integer)
blue.gain= ?0 to 200 (integer)
Geometr y menu
aspect.ratio= ?0 = 5:4 
1 = 4:3 
2 = 16:10 
3 = 16:9 
4 = 1.88:1 
5 = 2.35:1 
6 = Source 
7 = Unscaled...

page 56
Remote Communications Guide
COMMAND GUIDE

3D menu
3d.format= ?0 = Off 
1  = Auto 
2 = Side by Side 
3 = Top and Bottom 
4 = Frame Sequential
3d.dlplink= ?0 = Off, 1 = On
3d.dominance= ?0 = Normal, 1 = Reverse
Lamps menu
lamp.mode= ?0 = Auto 1 
1 = Dual 
2 = Lamp 1 
3 = Lamp 2
power.mode= ?0 = Eco, 1 = Normal, 2 = Custom
lamp.power= ?
altitude= ?0 = Off, 1 = On
lamp1.hours?
lamp2.hours?
lamp1.status?
lamp2.status?
Notes
   
Digital Projection E-Vision 6800 3D Series 
Rev A Januar y 2015  

page 57
Remote Communications Guide
COMMAND GUIDE

Setup menu
orientation= ?0 = Desktop Front
1 = Ceiling Front
2 = Desktop Rear
3 = Ceiling Rear
lan.ip= ?A valid IP address in the following format xxx.xxx.xxx.xxx
lan.subnet= ?A valid subnet mask address in the following format xxx.xxx.xxx.xxx
lan.gateway= ?A valid LAN gateway address in the following format x.x.x.x
lan.dns= ?A valid DNS address in the following format x.x.x.x
lan.dhcp= ?0 = Off, 1 = On
lan.standby= ?0 = Off, 1 = On
auto.source= ?0 =...

page 58
Remote Communications Guide
WEB CONFIGURATION UTILITY
Web Configuration Utility
Use the embedded Web Configuration 
Utility to control the projector via a LAN 
network:
1. Make sure the projector is connected to 
a remote computer via LAN.
2. From the remote computer, access the 
LAN IP address of the projector. The 
Web Configuration Utility opens.
The utility’s features are arranged in the 
following tabs:
1 Projector Status
View projector and network 
information.
2 Alert Mail Setup
Set up...

page 59
Remote Communications Guide
WEB CONFIGURATION UTILITY
Email settings
To receive error warnings and status reports 
by email:
1. Navigate to the 
Alert Mail Setup tab 1.
2. Enter user credentials, SMTP settings, 
email addresses and preferences as 
required.
Optionally, click Send Test Mail to test 
your email settings.
For assistance with your network settings, 
consult your network administrator.
Notes
1
   
Digital Projection E-Vision 6800 3D Series 
Rev A Januar y 2015  

page 60
Remote Communications Guide
WEB CONFIGURATION UTILITY
Projector controls
To access projector controls, navigate 
to the Crestron page.
From this page you can do the 
following:
1 Power the projector ON/OFF
2 Select input source
3 Freeze the image
4 Adjust image settings:
Contrast, Brightness and 
Sharpness.
Click a button to open a slider.
5 Zoom and shift the image
Click the edge of the ribbon to 
access the Zoom control.
6 Change network settings
Click the Tools link.
7 Contact IT support
Click...

page 61
Remote Communications Guide
WEB CONFIGURATION UTILITY
PJLink security options
To access PJLink security options, open the PJLink 
page.
From this page you can enable or disable PJLink 
security and set up a password.
Current PJLink specifications can be found at 
http://pjlink.jbmia.or.jp/english  - navigate to the 
Downloading tab. 
Notes
 The PJLink TCP Port number is 
5450.
   
Digital Projection E-Vision 6800 3D Series 
Rev A Januar y 2015  

Digital Projection Limited
Greenside Way, Middleton Manchester M24 1XX, UK
Registered in England No. 2207264 Registered	Office:	as	above
Tel (+44) 161 947 3300 Fax (+44) 161 684 7674
[email protected] [email protected]
www.digitalprojection.co.uk
Digital Projection Inc.
55 Chastain Road, Suite 115 Kennesaw, GA 30144, USA
Tel (+1) 770 420 1350 Fax (+1) 770 420 1360
[email protected] www.digitalprojection.com
Digital Projection China
中国 北京市  朝阳区 芍药居北里101号...