Digital Projection Projector E-Vision 6800 3D Series User Manual

page 15
Connection Guide
SIGNAL INPUTS AND OUTPUTS
Signal Inputs And Outputs
1 HDBaseT/LAN
Receives digital signal from HDBaseT-compliant 
devices.
2 VGA
This input receives analog signals from a computer.
When using this input, it is best to use a fully wired 
VGA cable to connect the source to the projector. 
This will allow the source to determine the projector’s 
capabilities via DDC and show an optimized image. 
Such cables can be identified as they have a blue 
connector shell.
3 Component 1...

page 16
Connection Guide
SUPPORTED SIGNAL INPUT MODES
Supported Signal Input Modes
2D input modes
SignalResolutionRefresh Rate ( Hz )Total number of lines
Horizontal  Frequency (kHz)
VIDEO / S-VIDEOComponent 
1 & 2VGAHDMI / HDBaseTDVI (DVI-D)
SDTV480i720 x 48059.9452515.73üü
576i720 x 57650.0062515.63üü
EDTV480p59720 x 48059.9452531.47üü
480p60720 x 48060.0052531.50üü
576p50720 x 57650.0062531.25üü
HDTV720p501280 x 72050.0075037.50üü
720p591280 x 72059.9475044.96üü
720p601280 x 72060.0075045.00üü...

page 17
Connection Guide
SUPPORTED SIGNAL INPUT MODES
SignalResolutionRefresh Rate ( Hz )Total number of lines
Horizontal  Frequency (kHz)
VIDEO / S-VIDEOComponent 
1 & 2VGAHDMI / HDBaseTDVI (DVI-D)
COMPUTERVGA59640 x 48059.9452531.47üüü
VGA60640 x 48060.0052531.50üüü
VGA75640 x 48075.0050037.50üüü
SVGA60800 x 60060.3262837.88üüü
SVGA75800 x 60075.0062546.88üüü
SVGA85800 x 60085.0663153.67üüü
XGA601024 x 76860.0080648.36üü
XGA701024 x 76870.0780656.48üü
XGA751024 x 76875.0380060.02üü
WXGA501280 x...

page 18
Connection Guide
SUPPORTED SIGNAL INPUT MODES
3D input modes
SignalResolutionRefresh Rate ( Hz )Total number of lines
Horizontal  Frequency (kHz)HDMI / HDBaseTDVI-D
VGA59 Frame Sequential640 x 48059.9452531.47ü
SVGA60 Frame Sequential800 x 60060.3262837.88ü
XGA60 Frame Sequential1024 x 76860.0080648.36ü
XGA120 Frame Sequential1024 x 768120.0081397.55ü
WXGA60 Frame Sequential1280 x 80059.8183149.70ü
WXGA120 Frame Sequential1280 x 800119.90847101.56ü
SXGA60 Frame Sequential1280 x...

page 19
Connection Guide
SUPPORTED SIGNAL INPUT MODES
SignalResolutionRefresh Rate ( Hz )Total number of lines
Horizontal  Frequency (kHz)HDMI / HDBaseTDVI-D
1080p60 Side-by-Side (Half)1920 x 108060.00112567.50ü
1080p60 Top-and-Bottom1920 x 108060.00112567.50ü
1080p60 Frame Sequential1920 x 108060.00112567.50ü
Notes
 Only the HDMI and HDBaseT inputs 
support HDMI 1.4 3D formats.
   
Digital Projection E-Vision 6800 3D Series 
Rev A Januar y 2015  

page 20
Connection Guide
CONTROL CONNECTIONS
Control Connections
1 HDBaseT/LAN
Receives digital signal from HDBaseT-compliant 
devices.
All of the projector’s features can be controlled via a 
LAN connection, using commands described in the 
Remote Communications Guide.
2 3D Sync Out
Connect to a Z Screen or 3D IR emitter as 
appropriate.
3 Service
The USB Service port is used for firmware updates 
only.
4 Wired Remote
The remote control can be connected using a 
standard TRS cable.
5 RS-232
All of the...

OPERATING GUIDE4
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AU
TO 
Rev A Januar y 2015 
E-Vision 6800 3D Series
High Brightness Digital Video Projector  

Operating Guide
IN THIS GUIDE
IN THIS GUIDE
Using The Remote Control ........................................................................\
.....23
Using The Projector ........................................................................\
.................25
Main menu .................................................................................................................25
Lens menu...

page 23
Operating Guide
USING THE REMOTE CONTROL
Using The Remote Control
1 Power ON
2 Power OFF
3 Lens controls: FOCUS and ZOOM
4 Navigation
Navigate through the menus with the arrows, confirm your choice with ENTER.
5 MENU
Access the projector OSD (on-screen display). If the OSD is open, press this button 
to exit.
6 INPUT
Select from the available video input signals.
7 AUTO
The projector will re-synchronise with the current input signal.
8 OVERSCAN
9 3D MODE
Access the 3D menu.
10 INFO
Access the...

page 24
Operating Guide
USING THE REMOTE CONTROL
11 TEST PATTERN
Select from a list of available test patterns.
12 LENS SHIFT
Press this button, then adjust the lens position using the arrow buttons\
.
13 RETURN
Press this button to leave the current menu and go back one level.
14 NETWORK
Access the Network menu.
15 PICTURE
Access the Image menu.
16 BLANK
Switch the image off.
17 ASPECT
Select from a list of available aspect ratios.
18 LAMP MODE
Access the Lamps menu.
19 FREEZE
Freeze the current image....