Digital Projection Projector E-Vision 6800 3D Series User Manual

page 45
Operating Guide
USING THE PROJECTOR
Information menu
This menu gives information about software and hardware configuration, input 
source and lamp operating times It also allows you to restore the factor\
y default 
settings.
Source information
This page provides information about the currently selected input source\
.
NotesInformation
SelectItem [RETURN]
Back
SerialNumber:
Software Version1:
Filter Time:
Power OnTime:
Source Information
Model:
8 
E-Vision
6800WUXGA 3D
Software Version2:
Adjust...

page 46
Operating Guide
MENU MAP
Menu Map
Menu Submenus and controls
INPUT 
HDMI, DVI-D, HDBaseT, VGA, Component 1, Component 2, S-Video, Video
TEST PATTERN 
Off, White, Black, Red, Green, Blue, Crosshatch, Burst, H Ramp, Color Bar, Checkerboard
LENS 
Zoom, Focus, Shift V, Shift H (commands, adjustment via arrow buttons)
IMAGE
Image Mode : Bright, Presentation, Video
Brightness, Contrast: sliders, 0 to 200 (100)
Gamma: 1.0, 1.8, 2.0, 2.2, 2.35, 2.5
Dynamic Black: On, Off
Saturation, Hue: sliders, 0 to...

page 47
Operating Guide
MENU MAP
COLOR
Color Space: Auto, YPbPr, YCbCr, RGB PC, RGB Video
Color Temperature: Native, 5500K, 6500K, 7800K, 9300K
Trim: Red Lift, Green Lift, Blue Lift, Red Gain, Green Gain, Blue Gain: s\
liders, 0 to 200 (100)
Hue / Saturation / Gain
Red: Hue, Saturation, Gain: sliders, 0 to 200 (100)
Green: Hue, Saturation, Gain: sliders, 0 to 200 (100)
Blue: Hue, Saturation, Gain: sliders, 0 to 200 (100)
Cyan: Hue, Saturation, Gain: sliders, 0 to 200 (100)
Magenta: Hue, Saturation, Gain:...

page 48
Operating Guide
MENU MAP
SETUP 
Orientation: Desktop Front, Ceiling Front, Desktop Rear, Ceiling Rear
Network
IP Address: numeric input (default IP address is 192.168.0.100)
Subnet Mask, Gateway, DNS: numeric input
DHCP: On, Off
Apply (command)
Standby Power: On, Off
Information only: MAC Address
RS232
Baud Rate: 38400, 19200, 9600
Channel: Local, HDBaseT
Security
Control Panel Lock: On, Off
Security Lock: On, Off
Filter
Filter Message: Off, 100 hours, 200 hours, 500 hours, 1000 hours
Filter...

LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AU
TO
REMOTE COMMUNICATIONS GUIDE4 
Rev A Januar y 2015 
E-Vision 6800 3D Series
High Brightness Digital Video Projector  

Remote Communications Guide
IN THIS GUIDE
IN THIS GUIDE
Introduction ........................................................................\
................................51
Network setup ...........................................................................................................51
Serial Port setup ........................................................................................................51
Protocol commands...

page 51
Remote Communications Guide
INTRODUCTION
Introduction
The projector can be controlled by using an external control system or a PC via an RS232 or LAN interface, using a terminal-emulation
program.
Network setup
1. Connect the projector to a LAN network.
2. Open the Setup > Network menu and edit network settings. The default IP address is 192.168.0.100 and the TCP port number is 7000.
Serial Port setup
• Baud rate: 9,600 bps (default), 19,200 bps or 38,400 bps.
• Data length: 8 bits
• Stop bits:...

page 52
Remote Communications Guide
INTRODUCTION
Protocol commands
Commands are used to simulate menu operations and determine the settings\
 of the projector, and use the following format:
• All commands consist of ASCII text strings starting with an asterisk and ending with an ASCII Carriage Return character  (code 13): 
*command operator  
• The  string determines which setting the command will affect.
• Spaces are required before the operator and before the value.
• The  string can take one of the...

page 53
Remote Communications Guide
COMMAND GUIDE
Command Guide
Protocol commands below are arranged in the order they appear in the OSD\
. Not all OSD settings have corresponding protocol commands.

Inputs
input= ?0 = HDMI 
1 = DVI-D 
2 = HDBaseT 
3 = VGA 
4 = Component 1 
5 = Component 2 
6 = S-Video 
7 = Video
Test Patterns
test.pattern= ?0 = Off 
1 = White 
2 = Black 
3 = Red 
4 = Green 
5 = Blue 
6 = Crosshatch 
7 = Burst 
8 = H Ramp 
9 = Color Bar 
10 = Checkerboard
Lens menu
lens.left(execute)...

page 54
Remote Communications Guide
COMMAND GUIDE

Image menu
picture.mode= ?0 = Bright 
1 = Presentation 
2 = Video
brightness= ?0 to 200 (integer)
contrast= ?0 to 200 (integer)
gamma= ?0 = 1.0 
1 = 1.8 
2 = 2.0 
3 = 2.2 
4 = 2.35 
5 = 2.5
dblack= ?0 = Off, 1 = On
sharpness= ?0 to 31 (integer)
nr= ?0 to 15 (integer)
resync(execute)
Notes
   
Digital Projection E-Vision 6800 3D Series 
Rev A Januar y 2015