Digital Projection M-vision Cine 400 3d Series User Guides

M-Vision Cine 400 3D series
High Brightness Digital Video Projector
16:9 widescreen display
Revision A, May 2012 112-853 A
USER GUIDES
INSTALLATION AND QUICK START GUIDE
CONNECTION GUIDE
OPERATING GUIDE
REMOTE COMMUNICATIONS GUIDE 

This page is intentionally left blank. 

M-Vision Cine 400 3D series
High Brightness Digital Video Projector
16:9 widescreen display
Revision A, May 2012 112-854A
INSTALLATION AND QUICK-START GUIDE 

Digital Projection M-Vision Cine 400 3D series Installation and Quick-Start Guide
Revision A, May 2012 
CONTENTS
Important information ............................................................Inst-01
Symbols used in this guide ........................................................................\
.....Inst-01
Special formatting ........................................................................\
....................Inst-01
Product revision...

Digital Projection M-Vision Cine 400 3D seriesIMPORTANT INFORMATIONInstallation and Quick-Start Guide
Revision A, May 2012 Inst-01
Important information
Please keep this guide handy for future reference.
A serial number is located on the side of the projector. Please record it here:
Symbols used in this guide
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
WARNING
This symbol indicates that there is a danger of physical...

Digital Projection M-Vision Cine 400 3D seriesWHAT’S IN THE BOX?Installation and Quick-Start Guide
Revision A, May 2012 
What’s in the box?
2PIC
MUTE4
B
SHARPO -SCAN
NR
GAMMA
C-TEMP
TEST
BRI -C
3D
SWAP
3 D
FORMAT
2 D /3 D
ENTER
SOURCE
36
1
ASPECT
RATIO
MENU
USER
MEMORY
C
A
|ON POWER OFF
Notes
Make sure your box contains 
everything listed. If any pieces 
are missing, please contact your 
dealer.
You should save the original box 
and packing materials in case you 
ever need to ship your projector....

Digital Projection M-Vision Cine 400 3D seriesGETTING TO KNOW THE PROJECTORInstallation and Quick-Start Guide
Revision A, May 2012 
Getting to know the projectorNotes
The projector uses the standard 
MVision series infra-red remote 
control.
Some of the controls are 
duplicated on the projector control 
panel, as shown on the next page.
For full details of how to use the 
controls and the menu system, 
see the Operating Guide.
Inst-03
Lens shift controls
(under the badge)
Front and rear viewsRemote...

Digital Projection M-Vision Cine 400 3D seriesGETTING TO KNOW THE PROJECTORInstallation and Quick-Start Guide
Revision A, May 2012 
Control panel and indicators
Some of the functions on the remote control are duplicated on the projec\
tor control panel, as shown here.
MENUMENU
POWERPOWERISSUEISSUE
LEDSTATUSLEDSTATUS
POWERPOWER
SELECT
SELECT
SOURCESOURCE
Power indicator (blue light)
The blue Power indicator will light when the projector is in STANDBY mode, and will flash when the projector is cooling down...

Digital Projection M-Vision Cine 400 3D seriesGETTING TO KNOW THE PROJECTORInstallation and Quick-Start Guide
Revision A, May 2012 
Error codes (red light)
If the projector detects an error, the red Issue indicator will flash as shown in the chart below. 
For example, if the lamp door is left open, the red indicator will flash twice followed by a pause, then the sequence will repeat until the error 
condition is corrected.
ConditionIssue indicator behaviour (red light)
Lamp failFlashes once, then pauses,...

Digital Projection M-Vision Cine 400 3D seriesPOSITIONING THE SCREEN AND PROJECTORInstallation and Quick-Start Guide
Revision A, May 2012 
Positioning the screen and projector
Consider the following:
 ●When installing the screen, ensure that it is in the best position for v\
iewing by your audience.
 ●When positioning the projector, ensure that it is at a suitable distance from the screen for the image to fill the screen.
 ●Whether you are mounting the projector on the ceiling or standing it on \
its...