Digital Projection E-Vision 6000 Series User Guides

E-Vision 6000 Series
High Brightness Digital Video Projector
OPERATING GUIDE
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AUT
O
Rev A September 2012  

Digital Projection E-Vision 6000 Series CONTENTS Operating Guide
CONTENTS
Using the Remote Control ................................................................Op 1
Using the Menus ........................................................................\
.............Op 2
Opening the menus .................................................................................Op 2
Inside a menu ..........................................................................................Op 2
Navigating the menus...

Digital Projection E-Vision 6000 Series USING THE REMOTE CONTROL Operating Guide
Op 1
Using the Remote ControlNotes
 Some options and controls may not 
be available due to settings in the 
menus.
 For full details of how to use the 
menu system, see later in this guide.
 Direct exposure to the laser beam 
may damage the eye.
  The grayed out buttons have no 
function on this projector.
Volume
̶  +
Keystone
Menu Status MuteVolume
Auto Blank Zoom +
Zoom -
Source Freeze
Laser
Power
MENU: display the MAIN...

Digital Projection E-Vision 6000 Series USING THE MENUS Operating Guide
Op 2
Using the Menus
Opening the menus
Access the various menus using either the projector control panel or the\
 
remote control. On either device,
•	press the MENU button.
A page opens on the screen showing a list of available menus. Use the 
UP and DOWN arrows to navigate through the list and press 
ENTER to open a menu.
Inside a menu
When you open a menu, the page consists of the following elements:
•	Title bar at the top 
Shows...

Digital Projection E-Vision 6000 Series USING THE MENUS Operating Guide
Op 3
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded gray on the actual menu.
Navigating the menus
When you open a page with tabs, you can do the following:
•	move from tab to tab using the LEFT and RIGHT  arrows.
•	return to the previous level by pressing MENU or RETURN.
•	navigate from the tabs to the page using the down arrow.
Within a menu page you can do the...

Digital Projection E-Vision 6000 Series USING THE MENUS Operating Guide
Op 4
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded gray on the actual menu.
Changing slider values
1. Navigate to the menu item and press the LEFT  or RIGHT  
arrow to adjust the value.
2. When ready, press MENU or RETURN to exit the slider.
Executing commands
Select a command item and press ENTER to execute it.
In some cases you will see a confirmation message. Use...

Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 5
A Tour of  the Menus
Main Menu
The projector settings are grouped into six menus as shown in the 
illustration.
•	Input 
Set the input source.
•	Adjust 
Access image properties. The Adjust menu is divided in three sections: 
Image, Image Options and Video.
•	Volume 
Change the volume of the internal loudspeaker.
•	Setting 
Access various projector settings. The Setting menu is divided in three 
sections: Basic, Installation...

Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 6
Notes
Adjust menuImage tab
 See the next page for a full 
description of the Detail setting 
sub-menu. See also Menu Map later 
in this guide.
 The Reset command only affects 
settings on the Image tab.
Adjust menu
The Adjust menu contains three tabs: Image, Image Options and Video.
Image
The Image tab is used to alter picture settings.
•	Image select 
Select one of the display modes as required. 
•	Detail setting 
This...

Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 7
Adjust menu continued...
Detail setting sub-menu
The Detail setting menu contains three tabs: Basic, White balance, and 
Color correction.
Basic tab
•	Gamma 
Choose from:
•	Dynamic 
The gamma curve is adjusted automatically, depending on the 
image content.
•	Natural 
Balanced shadow detail and black level.
•	Black detail 
Increased shadow detail at the expense of elevated black levels.
Press LEFT  or RIGHT  to change the...

Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 8
Adjust menu continued...
White balance and Color correction tabs
These tabs allow fine adjustment of color settings to correct for the source or 
viewing environment.
Notes
Adjust menuImage tabDetail setting sub-menuWhite Balance tab
Adjust menuImage tabDetail setting sub-menuColor correction tab
Detailsetting
Basic Whitebalance Colorcorrection
White Balance
Red
Green
Blue
Contrast R
Contrast G
Contrast B50
50
50
50
50
50...