Digital Projection E-Vision 6000 Series User Guides

Digital Projection E-Vision 6000 Series CHANGING THE LENS, LAMPS AND COLOR WHEEL Installation and Quick-Start Guide
Inst 7
Changing the lamp
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the two captive screws securing the lamp module.
3. Pull firmly upwards on the handle to remove the lamp module.
4. Insert a new lamp module.
5. Fasten the screws.
6. Replace the lamp compartment cover.
Notes
123
456 
Rev A September 2012  

Digital Projection E-Vision 6000 Series CHANGING THE LENS, LAMPS AND COLOR WHEEL Installation and Quick-Start Guide
Inst 8
Changing the color wheel
1. Slide open the lamp compartment cover as shown in the picture.
2. Unscrew the four captive screws securing the color wheel.
3. Remove the color wheel.
4. Insert a new color wheel.
5. Fasten the screws.
6. Replace the lamp compartment cover.
Notes
 A four-segment color wheel, 
optimized for brightness, is fitted as 
standard. Use the six-segment color...

Digital Projection E-Vision 6000 Series POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide
Inst 9
Positioning the Screen and Projector
1. Install the screen, ensuring that it is in the best position for viewing\
 by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet so that 
the projector is level, and perpendicular to the screen.  
Alternatively, five M4 bolts (max length 12 mm...

Digital Projection E-Vision 6000 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
Inst 10
Operating the Projector
Switching the Projector On
1. Connect the power cable between the mains supply and the projector. Switch on at the switch next to the power connector.
The Power indicator on the projector control panel will show amber and the Warning indicator will show green. The lamp will be off and 
the projector will be in STANDBY mode.
2. Press the POWER button on the control panel or on...

Digital Projection E-Vision 6000 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
Inst 11
Adjusting the Lens
Zoom
•	Use the ZOOM	+/− buttons on the control panel to adjust the lens so that the image fills the screen.
•	Or on the remote control:
1. Press MENU and from the list of options that appears on the screen, select SETTING.
2. On the BASIC tab, select ZOOM, then use the LEFT  and RIGHT  arrow buttons to adjust the lens.
Focus
•	Use the FOCUS	+/− buttons on the control panel to...

Digital Projection E-Vision 6000 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
Inst 12
Adjusting the Image
Orientation
1. Press MENU and from the list of options that appears on the screen, select SETTING.
2. On the INSTALLATION tab, open the CEILING & REAR setting, then select the desired image orientation. (Choose from Desktop Front, 
Ceiling Rear, Desktop Rear and Ceiling Front.)
Aspect Ratio
1. Press MENU and from the list of options that appears on the screen, select ADJUST.
2....

CONNECTION GUIDE
E-Vision 6000 Series
High Brightness Digital Video Projector
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AUT
O
Rev A September 2012  

Digital Projection E-Vision 6000 Series CONTENTS Connection Guide
CONTENTS
Signal Inputs and Outputs ...........................................................Conn 1
Computer 1 ..........................................................................................Conn 1
Computer 2 ..........................................................................................Conn 1
Computer 3 ..........................................................................................Conn 1
Component...

Digital Projection E-Vision 6000 Series SIGNAL INPUTS AND OUTPUTS Connection Guide
Conn 1
Signal Inputs and Outputs
Computer 1
•	Connect an analog computer (VGA) cable to the 15-pin D-type.
•	Connect a stereo audio cable to the 3.5mm jack.
Computer 2
•	Connect a set of RGsB, RGBHV or YCrCb cables to the BNC connectors.
•	Connect a stereo audio cable to the 3.5mm jack.
Computer 3
•	Connect a DVI-D cable to the DVI connector.
•	Connect a stereo audio cable to the 3.5mm jack below the DVI connector....

Digital Projection E-Vision 6000 Series SUPPORTED SIGNAL INPUT MODES Connection Guide
Conn 2
Supported Signal Input Modes
SignalResolutionRefresh Rate ( Hz )
Total number of lines
Horizontal  Frequency (kHz)
VIDEO /S-VIDEOCOMPONENTCOMPUTER 1
(VGA)
COMPUTER 2(RGB/YCrCb)COMPUTER 3
(DVI-D)
SDTV480i720 x 48059.9452515.73üüü
576i720 x 5765062515.63üüü
HDTV 480p720 x 48059.9452531.47üüü
576p720 x 5765062531.25üüü
720p501280 x 7205075037.50üüü
720p601280 x 7206075045.00üüü
1080i501920 x 108050112528.13üüü...