Digital Projection E-Vision 6000 Series User Guides
Here you can view all the pages of manual Digital Projection E-Vision 6000 Series User Guides. The Digital Projection manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 51
Digital Projection E-Vision 6000 Series MENU MAP Operating Guide Op 19 Installation Ceiling & Rear Desktop Front, Ceiling Rear, Desktop Rear, Ceiling Front Communication speed 4800bps, 9600bps, 19200bps, 38400bps Display time Manual, Auto 5 sec, Auto 15 sec, Auto 45 sec Background Blue, Black, Logo Pin code lock Off, On Key lock Off, On DynamicBlack Off, On RC sensor Both, Front, Back Network setting DHCP Enable, Disable IP address Subnet Gateway Enable, Disable DNS Enable, Disable Apply settings...
Page 52
This page is intentionally left blank.
Page 53
E-Vision 6000 Series High Brightness Digital Video Projector REMOTE COMMUNICATIONS GUIDE LENS SHIFTZOOM –FOCUS+ MENU ENTER RETURN SOURCE POWER WARNING LAMP1LAMP2AUT O Rev A September 2012
Page 54
![Page 54
Digital Projection E-Vision 6000 Series CONTENTS Remote Communications Guide
CONTENTS
Introduction ........................................................................\
....................Rem 1
Serial Port Control Commands ..................................................Rem 2
Header code.................................................................................Rem 2
Examples .....................................................................................Rem 2
The Commands...](http://img.usermanuals.tech/thumb/5761/86930/w300_digital-projection-e-vision-wxga-6000-manual_d-53.png "Page 54
Digital Projection E-Vision 6000 Series CONTENTS Remote Communications Guide
CONTENTS
Introduction ........................................................................\
....................Rem 1
Serial Port Control Commands ..................................................Rem 2
Header code.................................................................................Rem 2
Examples .....................................................................................Rem 2
The Commands...")
Digital Projection E-Vision 6000 Series CONTENTS Remote Communications Guide CONTENTS Introduction ........................................................................\ ....................Rem 1 Serial Port Control Commands ..................................................Rem 2 Header code.................................................................................Rem 2 Examples .....................................................................................Rem 2 The Commands...
Page 55
![Page 55
Digital Projection E-Vision 6000 Series INTRODUCTION Remote Communications Guide
Rem 1
Introduction
The projector can be controlled by using an external control system in t\
hree different ways:
• The projector’s features can be controlled via a serial connection, using the control \
strings described in this guide.
• The projector’s features can be controlled via a LAN connection, using the industry st\
andard PJLink commands.
• A number of basic picture and input settings can be controlled directly u\...](http://img.usermanuals.tech/thumb/5761/86930/w300_digital-projection-e-vision-wxga-6000-manual_d-54.png "Page 55
Digital Projection E-Vision 6000 Series INTRODUCTION Remote Communications Guide
Rem 1
Introduction
The projector can be controlled by using an external control system in t\
hree different ways:
• The projector’s features can be controlled via a serial connection, using the control \
strings described in this guide.
• The projector’s features can be controlled via a LAN connection, using the industry st\
andard PJLink commands.
• A number of basic picture and input settings can be controlled directly u\...")
Digital Projection E-Vision 6000 Series INTRODUCTION Remote Communications Guide Rem 1 Introduction The projector can be controlled by using an external control system in t\ hree different ways: • The projector’s features can be controlled via a serial connection, using the control \ strings described in this guide. • The projector’s features can be controlled via a LAN connection, using the industry st\ andard PJLink commands. • A number of basic picture and input settings can be controlled directly u\...
Page 56
![Page 56
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 2
Serial Port Control Commands
There are three types of command, Set commands, Get commands and Remote commands. The individual commands are described later
in this guide. All commands consist of ASCII text strings ending with an ASCII carriage return character [CR].
• Set commands: [CR]
• Set commands with data: s [CR]
• Get commands: q [CR]
• Remote commands: r [CR]
Header code
The...](http://img.usermanuals.tech/thumb/5761/86930/w300_digital-projection-e-vision-wxga-6000-manual_d-55.png "Page 56
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 2
Serial Port Control Commands
There are three types of command, Set commands, Get commands and Remote commands. The individual commands are described later
in this guide. All commands consist of ASCII text strings ending with an ASCII carriage return character [CR].
• Set commands: [CR]
• Set commands with data: s [CR]
• Get commands: q [CR]
• Remote commands: r [CR]
Header code
The...")
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide Rem 2 Serial Port Control Commands There are three types of command, Set commands, Get commands and Remote commands. The individual commands are described later in this guide. All commands consist of ASCII text strings ending with an ASCII carriage return character [CR]. • Set commands: [CR] • Set commands with data: s [CR] • Get commands: q [CR] • Remote commands: r [CR] Header code The...
Page 57
![Page 57
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 3
The Commands
The commands are divided into three groups: Set Commands, Get Commands a\
nd Remote Commands.
Set Commands
ASCIIHexFunctionDescription
~ P N [CR]7E 50 4E 0DPower On
~ P F [CR]7E 50 46 0DPower Off
~ A I [CR]7E 41 49 0DAuto Image
~ S 1 [CR]7E 53 31 0DSelect Input 1 (Computer 1)
~ S 2 [CR]7E 53 32 0DSelect Input 2 (Computer 2)
~ S 3 [CR]7E 53 33 0DSelect Input 3 (Computer 3)
~ S 4 [CR]7E 53 34...](http://img.usermanuals.tech/thumb/5761/86930/w300_digital-projection-e-vision-wxga-6000-manual_d-56.png "Page 57
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 3
The Commands
The commands are divided into three groups: Set Commands, Get Commands a\
nd Remote Commands.
Set Commands
ASCIIHexFunctionDescription
~ P N [CR]7E 50 4E 0DPower On
~ P F [CR]7E 50 46 0DPower Off
~ A I [CR]7E 41 49 0DAuto Image
~ S 1 [CR]7E 53 31 0DSelect Input 1 (Computer 1)
~ S 2 [CR]7E 53 32 0DSelect Input 2 (Computer 2)
~ S 3 [CR]7E 53 33 0DSelect Input 3 (Computer 3)
~ S 4 [CR]7E 53 34...")
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide Rem 3 The Commands The commands are divided into three groups: Set Commands, Get Commands a\ nd Remote Commands. Set Commands ASCIIHexFunctionDescription ~ P N [CR]7E 50 4E 0DPower On ~ P F [CR]7E 50 46 0DPower Off ~ A I [CR]7E 41 49 0DAuto Image ~ S 1 [CR]7E 53 31 0DSelect Input 1 (Computer 1) ~ S 2 [CR]7E 53 32 0DSelect Input 2 (Computer 2) ~ S 3 [CR]7E 53 33 0DSelect Input 3 (Computer 3) ~ S 4 [CR]7E 53 34...
Page 58
![Page 58
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 4
Get Commands
ASCIIHexFunctionReturn String
~ q V [CR]7E 71 56 0DSoftware VersionThe current software version.
~ q P [CR]7E 71 50 0DPower StateOn or Off
~ q S [CR]7E 71 53 0DInput SelectOne of the following:
Computer1, Computer2, Computer3, Component, Video, S-Video
~ q L [CR]7E 71 4C 0DLamp HoursBetween 0 and 2000, between 0 and 2000
~ q L1 [CR]7E 71 4C 31 0DLamp1 HoursBetween 0 and 2000
~ q L2 [CR]7E...](http://img.usermanuals.tech/thumb/5761/86930/w300_digital-projection-e-vision-wxga-6000-manual_d-57.png "Page 58
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 4
Get Commands
ASCIIHexFunctionReturn String
~ q V [CR]7E 71 56 0DSoftware VersionThe current software version.
~ q P [CR]7E 71 50 0DPower StateOn or Off
~ q S [CR]7E 71 53 0DInput SelectOne of the following:
Computer1, Computer2, Computer3, Component, Video, S-Video
~ q L [CR]7E 71 4C 0DLamp HoursBetween 0 and 2000, between 0 and 2000
~ q L1 [CR]7E 71 4C 31 0DLamp1 HoursBetween 0 and 2000
~ q L2 [CR]7E...")
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide Rem 4 Get Commands ASCIIHexFunctionReturn String ~ q V [CR]7E 71 56 0DSoftware VersionThe current software version. ~ q P [CR]7E 71 50 0DPower StateOn or Off ~ q S [CR]7E 71 53 0DInput SelectOne of the following: Computer1, Computer2, Computer3, Component, Video, S-Video ~ q L [CR]7E 71 4C 0DLamp HoursBetween 0 and 2000, between 0 and 2000 ~ q L1 [CR]7E 71 4C 31 0DLamp1 HoursBetween 0 and 2000 ~ q L2 [CR]7E...
Page 59
![Page 59
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 5
Remote Commands
ASCIIHEXFunction
~ r U [CR]7E 72 55 0DUP arrow
~ r D [CR]7E 72 44 0DDOWN arrow
~ r L [CR]7E 72 4C 0DLEFT arrow
~ r R [CR]7E 72 52 0DRIGHT arrow
~ r P [CR]7E 72 50 0DPOWER
~ r E [CR]7E 72 45 0DEXIT
~ r I [CR]7E 72 49 0DINPUT
~ r A [CR]7E 72 41 0DAUTO
~ r K [CR]7E 72 4B 0DKEYSTONE +
~ r J [CR]7E 72 4A 0DKEYSTONE -
~ r M [CR]7E 72 4D 0DMENU
~ r S [CR]7E 72 53 0DSTATUS
~ r T [CR]7E 72 54...](http://img.usermanuals.tech/thumb/5761/86930/w300_digital-projection-e-vision-wxga-6000-manual_d-58.png "Page 59
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide
Rem 5
Remote Commands
ASCIIHEXFunction
~ r U [CR]7E 72 55 0DUP arrow
~ r D [CR]7E 72 44 0DDOWN arrow
~ r L [CR]7E 72 4C 0DLEFT arrow
~ r R [CR]7E 72 52 0DRIGHT arrow
~ r P [CR]7E 72 50 0DPOWER
~ r E [CR]7E 72 45 0DEXIT
~ r I [CR]7E 72 49 0DINPUT
~ r A [CR]7E 72 41 0DAUTO
~ r K [CR]7E 72 4B 0DKEYSTONE +
~ r J [CR]7E 72 4A 0DKEYSTONE -
~ r M [CR]7E 72 4D 0DMENU
~ r S [CR]7E 72 53 0DSTATUS
~ r T [CR]7E 72 54...")
Digital Projection E-Vision 6000 Series SERIAL PORT CONTROL COMMANDS Remote Communications Guide Rem 5 Remote Commands ASCIIHEXFunction ~ r U [CR]7E 72 55 0DUP arrow ~ r D [CR]7E 72 44 0DDOWN arrow ~ r L [CR]7E 72 4C 0DLEFT arrow ~ r R [CR]7E 72 52 0DRIGHT arrow ~ r P [CR]7E 72 50 0DPOWER ~ r E [CR]7E 72 45 0DEXIT ~ r I [CR]7E 72 49 0DINPUT ~ r A [CR]7E 72 41 0DAUTO ~ r K [CR]7E 72 4B 0DKEYSTONE + ~ r J [CR]7E 72 4A 0DKEYSTONE - ~ r M [CR]7E 72 4D 0DMENU ~ r S [CR]7E 72 53 0DSTATUS ~ r T [CR]7E 72 54...
Page 60
Digital Projection E-Vision 6000 Series LAN CONTROL UTILITY Remote Communications Guide Rem 6 LAN Control Utility It is possible to control some basic functions by using the embedded LAN Control Utility. The LAN Control Utility web address is http:///index.html. The embedded web page shown here should appear. Power ON/OFF Click on the buttons to turn the projector on or into Standby mode. Picture and Volume controls Click on the arrows to adjust the settings as required. Source Select Click on the...