Digital Projection E-Vision 6000 Series User Guides

							USER GUIDES
INSTALLATION AND QUICK-START GUIDE 
CONNECTION GUIDE 
OPERATING GUIDE 
REMOTE COMMUNICATIONS GUIDE
113-375 A
E-Vision 6000 Series
High Brightness Digital Video Projector
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AUT
O
Rev A September 2012  
						

							About these Guides
Please keep these Guides handy for future reference.
A serial number is located on the back of the projector. Record it here:
Symbols used in these Guides
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
 ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock\
 unless the instructions are closely 
followed.
 WARNING: this symbol indicates that there is a danger of physical injury \
to yourself and/or damage to the equipment unless 
the instructions are closely followed.
  NOTE: this symbol indicates that there is some important information tha\
t you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specifications and designs, and add new features 
without prior notice.
Digital Projection E-Vision 6000 Series
Rev A September 2012  
						

							E-Vision 6000 Series
High Brightness Digital Video Projector
INSTALLATION AND QUICK-START GUIDE
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AUT
O
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series CONTENTS Installation and Quick-Start Guide
CONTENTS
What’s in the Box? ........................................................................\
........Inst 1
Getting to know the Projector .....................................................Inst 2
Front, side and rear views .....................................................................Inst 2
Remote control .......................................................................................Inst 2
Control panel and remote control .........................................................Inst 3
Control panel indicators ........................................................................Inst 4
The Power indicator .......................................................................Inst 4
The Warning indicator ....................................................................Inst 4
The Lamp indicators.......................................................................Inst 5
Changing the lens, lamps and color wheel .........................Inst 6
Removing the lens  .................................................................................Inst 6
Fitting the lens ........................................................................................Inst 6
Changing the lamp .................................................................................Inst 7
Changing the color wheel ......................................................................Inst 8
Positioning the Screen and Projector .....................................Inst 9
Operating the Projector  ..................................................................Inst 10
Switching the Projector On  .................................................................Inst 10
Selecting an Input Signal 
.....................................................................Inst 10
Adjusting the Lens ...............................................................................Inst 11
Zoom 
......................................................................................................Inst 11
Focus  ...........................................................................................Inst 11
Shift ..............................................................................................Inst 11
Adjusting the Image .............................................................................Inst 12
Orientation....................................................................................Inst 12
Aspect Ratio .................................................................................Inst 12
Picture ..........................................................................................Inst 12
Switching the Projector Off .................................................................Inst 12
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series WHAT’S IN THE BOX? Installation and Quick-Start Guide
Inst 1
Notes
 Make sure your box contains 
everything listed. If any pieces are 
missing, contact your dealer.
 You should save the original box 
and packing materials, in case you 
ever need to ship your projector.
 The projector is shipped without a 
lens.
 A four-segment color wheel, 
optimized for brightness, is fitted as 
standard. Use the six-segment color 
wheel for optimized color.
 The power cable supplied will 
be appropriate to the shipping 
destination.
2 x AAA batteries
User Guides on CD (113-374)
Important Information 
(113-380)
Projector
Power cable
LENS SHIFT ZOOM–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AUT
O
Remote control 
(110-385)
Lens capSix-segment color  wheel
VGA cable
What’s in the Box? 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Inst 2
LENS SHIFTZOOM–FOCUS+
MENU
ENTER RETURN
SOURCE
PO WER WARNING
LAMP1LAMP2AUT
O
Getting to know the Projector
Front, side and rear views
Notes
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
 The upper wheel and the PAGE 
UP / PAGE DOWN buttons do 
not perform any function on this 
projector.
 The remote will function well within 
a radius of about 7 meters (23 feet) 
and 15 degrees above or below the 
projector level.
Lens
Connection 
panel
Mains 
input
Control 
panel
Adjustable 
foot
Front 
infra-red 
window
Rear 
infra-red 
window
Air inlet
Air 
inlet
Air outlet
Lamp and color 
wheel cover
Air filter 
cover
Air filter 
coverLoudspeaker
Loudspeaker
Remote control
Infra-red 
reception
40°
40°
Remote control
Lens 
release 
lever 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Inst 3
Control panel and remote control
Some of the controls from the remote control are duplicated on the proje\
ctor 
control panel, as shown on the right.
The following buttons are identical:
•	POWER on the remote control and  on the control panel.
•	 on the remote control and ENTER on the control panel.
•	SOURCE and AUTO on both devices.
•	VOLUME + / VOLUME - on the remote control and the LEFT  and 
RIGHT  arrow buttons on the control panel.
Notes
 For full details of how to use the 
controls and the menu system, see 
the Operating Guide.
Remote controlControl panel 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Inst 4
Control panel indicators
The Power indicator
The Power indicator will show amber when in standby and green when the projector is on, and will flash when the projector is warming up or 
cooling down.
ConditionPower indicator behaviour 
Power offOff
StandbyOn (amber) 
CoolingFlashing (amber)
Warming upFlashing (green)
Power on (Normal)On (green)
The Warning indicator
The Warning indicator will switch on or flash in different patterns to show different error situations.
ConditionWarning indicator behaviour 
Projector working normallyOff
Cover errorFlash and pause (red)pause
Temperature errorTwo flashes and pause (red)pause
Power errorThree flashes and pause (red)pause
Fan errorFour flashes and pause (red)pause
Key lockedOn (amber)
Standby, Power-savingOff
Standby, NormalOn (green)
MENU
ENTER RETURN
SOURCE
POWER WARNING LAMP1LAMP2
AUTO
 
Notes 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide
Inst 5
NotesThe Lamp indicators
The Lamp indicators will show which lamp is in use, and whether it is in Normal \
or Eco mode.
ConditionLamp indicators behaviour 
Lamp offOff
End of lamp lifeFlashing (red)
No lampFlash and pause (red)pause
Lamp errorSix flashes and pause (red)pause
Cooling lampFlashing (amber)
Re-light up sequenceFlashing (green)
Lamp life overOn (red)
Eco modeOn (amber)
Normal modeOn (green) 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series CHANGING THE LENS, LAMPS AND COLOR WHEEL Installation and Quick-Start Guide
Inst 6
Changing the lens, lamps and color wheel
Removing the lens
1. Remove the lens cap.
2. Push in the lens release lever, and turn the lens anti-clockwise.
3. Remove the lens.
Fitting the lens
1. Position the lens so that the label marked ‘O’ is at the top, and gently insert it all the way into the lens mount.
2. Turn the lens clockwise until it clicks into place.
Notes
1
2
3
12 
Rev A September 2012