Digital Projection E-Vision 6000 Series User Guides

							E-Vision 6000 Series
High Brightness Digital Video Projector
OPERATING GUIDE
LENS SHIFTZOOM
–FOCUS+
MENU
ENTER RETURN
SOURCE
POWER WARNING
LAMP1LAMP2AUT
O
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series CONTENTS Operating Guide
CONTENTS
Using the Remote Control ................................................................Op 1
Using the Menus ........................................................................\
.............Op 2
Opening the menus .................................................................................Op 2
Inside a menu ..........................................................................................Op 2
Navigating the menus .............................................................................Op 3
Accessing sub-menus ............................................................................Op 3
Editing settings .......................................................................................Op 3
Changing slider values ...........................................................................Op 4
Executing commands .............................................................................Op 4
Editing numeric fields .............................................................................Op 4
A Tour of  the Menus ........................................................................\
.....Op 5
Main Menu ................................................................................................Op 5
Input menu ...............................................................................................Op 5
Adjust menu 
.............................................................................................Op 6
Image ..............................................................................................Op 6
Detail setting sub-menu .......................................................................Op 7
Image Options .................................................................................Op 9
Video .............................................................................................Op 10
Volume control ......................................................................................Op 11
Setting menu 
..........................................................................................Op 11
Basic tab  .......................................................................................Op 11
Installation tab ...............................................................................Op 12
Installation tab - continued ............................................................Op 13
Network setting sub-menu .................................................................Op 14
Option tab......................................................................................Op 15
Information menu ..................................................................................Op 16
Usage time tab ..............................................................................Op 16
Input tab ........................................................................................Op 16
Network tab ...................................................................................Op 16
Version tab ....................................................................................Op 16
Reset menu ............................................................................................Op 16
Menu Map ........................................................................\
..........................Op 17
MAIN .......................................................................................................Op 17
INPUT......................................................................................................Op 17
ADJUST ..................................................................................................Op 17
VOLUME .................................................................................................Op 18
SETTING .................................................................................................Op 18
RESET  ....................................................................................................Op 19
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series USING THE REMOTE CONTROL Operating Guide
Op 1
Using the Remote ControlNotes
 Some options and controls may not 
be available due to settings in the 
menus.
 For full details of how to use the 
menu system, see later in this guide.
 Direct exposure to the laser beam 
may damage the eye.
  The grayed out buttons have no 
function on this projector.
Volume
̶  +
Keystone
Menu Status MuteVolume
Auto Blank Zoom +
Zoom -
Source Freeze
Laser
Power
MENU: display the MAIN menu, go back to the previous menu
POWER switch
SOURCE: select an input source
FREEZE: freeze the current image frame
AUDIO VOLUME
MUTE: switch both video and sound On and Off
LASER: use the remote control as a screen pointer
BLANK: switch video On and Off
STATUS: see information about lamp usage, projector running time and filter time
ZOOM: Digital zoom
AUTO: reacquire the source
ENTER: confirm your selection 
ARROW BUTTONS: navigate through the menus, adjust sliders (with LEFT and RIGHT)
KEYSTONE: adjust
Transmit LED 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series USING THE MENUS Operating Guide
Op 2
Using the Menus
Opening the menus
Access the various menus using either the projector control panel or the\
 
remote control. On either device,
•	press the MENU button.
A page opens on the screen showing a list of available menus. Use the 
UP and DOWN arrows to navigate through the list and press 
ENTER to open a menu.
Inside a menu
When you open a menu, the page consists of the following elements:
•	Title bar at the top 
Shows which menu (and sub-menu) you have accessed.
•	Tabs and page 
The active tab is highlighted. When you move to a different tab, a 
different page opens below.
•	Items on the page 
These can be sub-menus, settings, sliders, numeric fields or 
commands.
•	Available and unavailable items 
Unavailable items appear grayed out. Whether an item is available 
may depend on other settings.
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded gray on the actual menu.
Remote controlProjector control panel
Menu Title
Tab 1 Tab2 Tab3
Active Tab
Sub-menu 1
Sub-menu 2
Setting 1 Currentvalue
Setting 2 Currentvalue
Setting 3-unavailable Currentvalue
Slider
Numeric Field 123.456 .789 .012
Command
50
MENU
RETURN
ENTER
SOURCE AUTO
POWERWARNING LAMP1LAMP2
Volume
̶ + 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series USING THE MENUS Operating Guide
Op 3
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded gray on the actual menu.
Navigating the menus
When you open a page with tabs, you can do the following:
•	move from tab to tab using the LEFT and RIGHT  arrows.
•	return to the previous level by pressing MENU or RETURN.
•	navigate from the tabs to the page using the down arrow.
Within a menu page you can do the following: 
•	navigate within the page using the UP and DOWN arrows.
•	move back to the tabs by pressing MENU or RETURN.
Accessing sub-menus
Some menu items are sub-menus. They open new pages which in turn contain menu items. To access a sub-menu,
•	navigate within the page using the UP and DOWN arrows until the sub-menu is highlighted, and press ENTER. 
Editing settings
Each setting contains a list of values to choose from. You can change the value in two different ways.
•	Navigate to the menu item and press the LEFT  or RIGHT  arrow.
•	Alternatively, you can view the list and choose a value:
1. Navigate to the menu item and press ENTER.
2. In the pop-up list that opens, use the UP  and DOWN  arrows to highlight an item, and press ENTER again to apply the 
change and close the pop-up list. 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series USING THE MENUS Operating Guide
Op 4
Notes
 Some menu options and controls 
may not be available due to settings 
in other menus. These will be 
shaded gray on the actual menu.
Changing slider values
1. Navigate to the menu item and press the LEFT  or RIGHT  
arrow to adjust the value.
2. When ready, press MENU or RETURN to exit the slider.
Executing commands
Select a command item and press ENTER to execute it.
In some cases you will see a confirmation message. Use the LEFT  and 
RIGHT  arrows to select OK or RETURN, and press ENTER again to 
confirm your choice.
Editing	numeric	fields
1. Navigate to the item containing the fields and press ENTER to access it.
2. Move from field to field within the line using the LEFT  and 
RIGHT  arrows.
3. Alter the value of a field by pressing the UP  and DOWN  arrows.
Once you have made your changes on the page, navigate to the 
Apply Settings command and press ENTER to execute it.
Menu Title
Tab 1 Tab2 Tab3
Active Tab
Sub-menu 1
Sub-menu 2
Setting 1 Currentvalue
Setting 2 Currentvalue
Slider
Numeric Field 123.456 .789 .012
Apply settings
50
Active Item 123.456 .789 .012123 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 5
A Tour of  the Menus
Main Menu
The projector settings are grouped into six menus as shown in the 
illustration.
•	Input 
Set the input source.
•	Adjust 
Access image properties. The Adjust menu is divided in three sections: 
Image, Image Options and Video.
•	Volume 
Change the volume of the internal loudspeaker.
•	Setting 
Access various projector settings. The Setting menu is divided in three 
sections: Basic, Installation and Option. 
•	Information 
View your current configuration.
•	Reset  
Restore the factory default settings.
Use UP  and DOWN  to highlight a menu, and press ENTER to open 
the highlighted menu.
Input menu
This setting controls the input source used by the projector. Choose from the 
following input sources:
•	Computer 1 (VGA)
•	Computer 2 (RGBHV, RGsB or YCrCb)
•	Computer 3 (DVI-D)
•	Component
•	Video
•	S-Video
To set the input source, use UP  and DOWN  to select an input 
source, and press ENTER.
Notes
 See also Using the Menus, earlier 
in this guide and Menu Map, later in 
this guide.
 See the Connection Guide for 
further information about the 
available inputs and connections.
Input
Adjust
Volume
Setting
Information
ResetInput 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 6
Notes
Adjust menuImage tab
 See the next page for a full 
description of the Detail setting 
sub-menu. See also Menu Map later 
in this guide.
 The Reset command only affects 
settings on the Image tab.
Adjust menu
The Adjust menu contains three tabs: Image, Image Options and Video.
Image
The Image tab is used to alter picture settings.
•	Image select 
Select one of the display modes as required. 
•	Detail setting 
This sub-menu contains image adjustment options.
•	Contrast, Brightness, Sharpness, Color and Tint 
Set the sliders for these settings as required.
•	Reset 
Restore factory default settings.
Adjust
Image ImageOptions Video
Image
Imageselect 1:High-bright
Detail setting
Contrast
Brightness
Sharpness
Color
Tint
Reset
12
50
50
50
50 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 7
Adjust menu continued...
Detail setting sub-menu
The Detail setting menu contains three tabs: Basic, White balance, and 
Color correction.
Basic tab
•	Gamma 
Choose from:
•	Dynamic 
The gamma curve is adjusted automatically, depending on the 
image content.
•	Natural 
Balanced shadow detail and black level.
•	Black detail 
Increased shadow detail at the expense of elevated black levels.
Press LEFT  or RIGHT  to change the setting.
•	Color temp. 
Choose a value from 5000 (warmer) to 10500 (cooler).
•	BrilliantColor 
Allows for increased projector brightness at the expense of accurate 
color reproduction.
Notes
Adjust menuImage tabDetail setting sub-menuBasic tab
 
 Color temp. and BrilliantColor are 
not available when Image Select is 
set to High-bright or Presentation.
Detailsetting
Image Whitebalance Colorcorrection
Basic
Gamma Dynamic
Color temp.
BrilliantColor
6500
4 
Rev A September 2012  
						

							Digital Projection E-Vision 6000 Series A TOUR OF THE MENUS Operating Guide
Op 8
Adjust menu continued...
White balance and Color correction tabs
These tabs allow fine adjustment of color settings to correct for the source or 
viewing environment.
Notes
Adjust menuImage tabDetail setting sub-menuWhite Balance tab
Adjust menuImage tabDetail setting sub-menuColor correction tab
Detailsetting
Basic Whitebalance Colorcorrection
White Balance
Red
Green
Blue
Contrast R
Contrast G
Contrast B50
50
50
50
50
50
Detailsetting
Basic Whitebalance Colorcorrection
Colorcorrection
Red
Green
Blue
Yellow
Magenta
Cyan0.0
0.0
0.0
0.0
0.0
0.0 
Rev A September 2012