DELL 2355dn User Manual

130
2Adjust the document width guides to the correct document size. Ensure that the bottom 
of the document stack matches the paper size marked on the document input tray.
For detailed guidelines for preparing an original document, see 
Preparing a Document.
To load the document in the document glass:
1Open the document cover.
2Place the document face down on the document glass and align it with the registration 
guide on the top left corner of the glass.
 

131
For detailed guidelines for preparing an original document, see Preparing a Document.
3Close the document cover.
 NOTE: If you are copying a page from a book or magazine, lift the cover until its hinges are 
caught by the stopper and then close the cover. If the book or magazine is thicker than 30 mm, 
start copying with the cover open.
 
NOTE: Leaving the cover open while copying may affect the copy quality and toner 
consumption.
Making Copies
 NOTE: A computer connection is not required for...

132
Setting Copy Options
The Manual Copy menus on the operator panel let you customize all the basic copy options; 
number of copies, copy size, contrast and image quality. Set the following options for the 
current copy job before pressing 
Start ( ) to make copies.
 NOTE: If you press AC while you set the copy options, all of the options you have set for the current 
copy job will be canceled and return to their default status. Or, they automatically return to their 
default status after copying....

133
Contrast
Adjust the contrast to make the copy lighter or darker than the original. 
1Press Copy from the home screen.
2Press the Next ( ) button.
3Press the up/down arrows to select Contrast.
4Press the left/right arrows to select the contrast you want.
Original Size
You can set the size of a copied image, when you copy original documents from the documents 
glass or the DADF. 
1Press Copy from the home screen.
2Press the Next ( ) button.
3Press the up/down arrows to select Original Size.
4Press the...

134
Using Special Copy Features
 NOTE: Some features may not be available depending on where you loaded the document, on the 
document glass or in the DADF.
 
NOTE: The menu items of Collate Copy, 2 up, and 4 up may be available only when you loaded the 
document in the DADF.
You can use the following copy features using the Copy menu:
•
ECO Copy: The eco feature allows you to save print resources and leads you to 
eco-friendly copy. 
See ECO Copying.
•Book Copy: Use this feature to copy. See Book...

135
ECO Copying
You can cut toner consumption and paper usage.
To make the 
ECO copying: 
1Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see 
Loading an Original Document.
2Press Copy from the home screen.
3Press the left/right arrows to select ECO Copy.
4Press Options.
5Press the up/down arrows to select in an environment friendly option.
6Press the left/right arrows to select you...

136
6If necessary, customize the copy settings including number of copies, contrast, original 
size, and original type. See 
Setting Copy Options.
7Press   to go to the upper menu.
8Press Start (). (on the touch screen or the operator panel)
 NOTE: You can cancel the copy job at any time. Press  , and the copying will stop.
Collate Copying
This special copy mode can be applied when you load a document using only the DADF.
To make the 
Collate copying: 
1Load the document(s) face up with top edge in first...

137
Clone Copying
This special copy mode can be applied when you load a document using only the document 
glass. If a document is detected on the DADF, the 
Clone copying feature does not work.
 NOTE: You cannot adjust the copy size using the Zoom menu while making a clone copy.
To make the Clone copying: 
1Place a single document face down on the document glass.
For details about loading a document, see 
Loading an Original Document.
2Press Copy from the home screen.
3Press the left/right arrows to...

138
ID Copying
When you copy using this feature, the printer prints one side on the upper half of the paper 
and the other side on the lower half without reducing the original. This feature is helpful for 
copying a small-sized document, such as a name card. 
If the original document is larger than the printable area, some portions may not be printed.
This special copy mode can be applied when you load a document using only the document 
glass. If a document is detected in the DADF, the ID copying...

139
2-up or 4-up copying (N-up)
The machine reduces the size of the original images and prints 2 or 4 pages onto one sheet of 
paper. This special copy mode can be applied when you load a document using only the DADF. 
 NOTE: You cannot adjust the copy size using the Zoom menu for making a 2 Up or 4 Up copy.
1
Load the document(s) face up with top edge in first into the DADF.
OR
Place a single document face down on the document glass.
For details about loading a document, see 
Loading an Original...