DELL 1135n User Manual

[root@localhost  Linux]#./uninstall.sh
The  installation program  runs automatically if you have  an autorun  software package installed  and
configured.
4. Click  Uninstall .
5. Click  Next.
6. Click   Finish .
Sharing your machine locally
Follow the steps below  to  set  up  the computers to  share  your  machine locally.
If  the host computer  is directly connected to  the machine with a  USB  cable  and  is also  connected to  the local  network
environment, the client  computers connected to  the...

Macintosh
The  following steps are for Mac OS X  10.5  ~ 10.6. Refer to  Mac Help for other OS versions.
Setting up a host computer
1. Install your  printer driver  (See Macintosh).
2. Open the Applications  folder > System Preferences   and  click  Print &  Fax .
3. Select the printer to  share  in the  Printers list.
4. Select Share  this  printer .
Setting up a client computer
1. Install your  printer driver  (See  Macintosh).
2. Open the Applications  folder > System Preferences   and  click  Print &...

Basic setup
After installation is complete,  you may want  to  set  the machine’s  default settings. Refer to  the next section if you would
like to  set  or change  values. This chapter gives  you step-by-step instructions for setting  up  the machine.
This chapter includes:
Altitude adjustment
Changing the display  language
Setting  the date and  time
Changing the clock  mode
Changing the default mode
Setting  sounds
Entering characters using  the number keypad
Using the save modes
Setting  the default...

3. 
4. Press  the left/right  arrow until Language appears and  press   OK.
5. Press  the left/right  arrow to  display  the language you want.
6. Press   OK to  save the selection.
7. Press   Stop/Clear  () to  return  to  ready  mode.
Setting the date and time
When  you set  the time and  date, they are used in delay  fax and  delay  print. They  are printed on reports. If, however,
they are not correct,  you need  to  change  it  for the correct time being.
If  the machine’s  power is cut off,  you...

Ringer: Adjusts the ringer volume. For  the ringer volume, you can  select  Off, Low , Mid ,  and   High.
Speaker, ringer, key sound, and alarm sound
1. Press   Menu  () on the control panel.
2. Press  the left/right  arrow until  System Setup appears and  press   OK.
3. Press  the left/right  arrow until  Sound/Volume appears and  press   OK.
4. Press  the left/right  arrow until the sound  option you want  appear and  press   OK.
5. Press  the left/right  arrow until the desired status or volume  for...

# #
Correcting numbers or names
If  you make  a  mistake while  entering  a  number or name, press  the left/right  arrow button to  delete the last digit  or
character. Then enter the correct number or character.
Inserting a pause
With some  telephone systems, you must  dial  an access  code  (9, for example) and  listen  for a  second  dial  tone.  In
such cases, you must  insert  a  pause in the telephone number. You  can  insert  a  pause while  you are setting  up  speed
dial  numbers.To insert  a...

3. Press  the left/right  arrow until Paper  Setup appears and  press   OK.
4. Press  the left/right  arrow until  Paper  Type appears and  press   OK.
5. Press  the left/right  arrow to  select the paper tray  you want  and  press   OK.
6. Press  the left/right  arrow to  select the paper type you want.
7. Press   OK to  save the selection.
8. Press   Stop/Clear  () to  return  to  ready  mode.
Setting the paper source
1. Press  Menu  () on the control panel.
2. Press  the left/right  arrow until...

5. Select tray  (source) and  its  options,  such as paper size and  type.
6. Press  OK.
Setting job timeout
When  there is no input for a  certain  period of time,  the machine exits the current menu  and  goes  in to  the default
settings. You  can  set  the amount  of time the machine will wait.
1. Press   Menu  () on the control panel.
2. Press  the left/right  arrow until  System Setup appears and  press   OK.
3. Press  the left/right  arrow until  Machine Setup appears and  press   OK.
4. Press...

Printing
This chapter explains  common printing tasks.
This chapter includes:
Printer  driver  features
Basic  printing
Opening  printing preferences
Using help
Using special print  features
Changing the default print  settings
Setting  your  machine as a  default machine
Printing  to  a  file (PRN)
Macintosh  printing
Linux  printing
The  procedures in this chapter are mainly  based on Windows XP.
Printer driver features
Your  printer drivers support the following standard  features:
Paper  orientation,...

cannot select that  option due  to  the machine’s  setting  or environment.
The  following procedure describes the general steps required  for printing from  various Windows applications.
Macintosh  basic printing (See  Macintosh  printing).
Linux  basic printing (See  Linux  printing
).
The  following  Printing Preferences  window  is for Notepad  in Windows XP. Your   Printing Preferences window  may
differ, depending on your  operating  system  or the application  you are using.
1. Open the document...