D-Link Router N 150 User Manual

							37
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
To use the Universal Plug and Play (UPnP) \beature 
\fli\fk  Enable UPnP. UPnP provides \fompatibility 
with  net work ing  equipment,  so\b t ware  and 
peripherals.
Un\fhe\fking the box will not allow the router to 
respond to pings. Blo\fking the ping may provide 
some extra se\furity \brom ha\fkers. Che\fk the box 
to allow the Internet port to be “pinged”.
You may set the port speed o\b the Internet port 
to 10Mbps, 100Mbps, or auto. Some older \fable 
or DSL modems may require you to set the port 
speed to 10Mbps.
UPnP Settings:
Enable WAN 
Ping Response:
WAN Port Speed:
Advanced Network Settings  
						

							38
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Enter a new password \bor the Administrator Login 
Name. The administrator \fan make \fhanges to the 
settings.
Remote  management  allows  the  router  to  be 
\fonfigured \brom the Internet by a web browser. A 
username and password is still required to a\f\fess 
the Web-Management  inter\ba\fe.  In  general,  only 
a member o\b your network \fan browse the built-
in web pages to per\borm Administrator tasks. This 
\beature enables you to per\borm Administrator tasks 
\brom the remote (Internet) host.
The port number used to a\f\fess the router.
Admin Password:
Remote 
\fanagement:
Remote Admin  Port:
Tools
Administrator Settings
This page will allow you to \fhange the administrator and user passwords. You \fan also enable Remote Management.  There are 
two a\f\founts that \fan a\f\fess the management inter\ba\fe through the web browser. The a\f\founts are admin and user. Admin 
has read/write a\f\fess while user has read-only a\f\fess. User \fan only view the settings but \fannot make any \fhanges. Only the 
admin a\f\fount has the ability to \fhange both admin \land user a\f\fount passwords.  
						

							39
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Time Settings
Sele\ft the Time Zone \brom the drop-down menu.
To  sele\ft  Daylight  Saving  time  manually,  sele\ft 
enabled or disabled, and enter a start date and an 
end date \bor daylight saving time.
Press this button to set the devi\fe’s time to mat\fh 
a lo\fal PC. 
NTP  stands  \bor  Net wor k  Time  Proto\fol.  NTP 
syn\fhronizes  \fomputer  \flo\fk  times  in  a  network 
o\b \fomputers. Che\fk this box to use a NTP server. 
This will only \fonne\ft to a server on the Internet, 
not a lo\fal server.
Enter the NTP server or sele\ft one \brom the drop-
down menu. The router will syn\f the same time to 
D-Link Internet time server. 
To  manually  input  the  time,  enter  the  values  in 
these fields \bor the Year, Month, Day, Hour, Minute, 
and Se\fond and then \fli\fk Sa\be Settings. 
Time Zone:
Daylight Sa\bing:
Sync your 
Computer’s Time  Settings:
Enable NTP  Ser\ber:
NTP Ser\ber Used:  
\fanual:
The Time Configuration option allows you to \fonfigure, update, and maintain the \forre\ft time on the internal system \flo\fk. 
From this se\ftion you \fan set the time zone that you are in and set the Time Server. Daylight Saving \fan also be \fonfigured to 
automati\fally adjust the t\lime when needed.  
						

							40
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
U s e   t h i s   o p t i o n   t o   s a v e   t h e   \f u r r e n t   r o u t e r 
\fonfiguration settings to a file on the hard disk o\b 
the  \fomputer  you  are  using.  First,  \fli\fk  the  Sa\be 
button. You will then see a file dialog, where you 
\fan sele\ft a lo\fation and file name \bor the settings. 
Use  this  option  to  load  previously  saved  router 
\fonfiguration settings. First, use the Browse \fontrol 
to  find  a  saved  \fonfiguration  settings  file.  Then, 
\fli\fk the  Load button to trans\ber those settings to 
the router. 
This  option  will  restore  all  \fonfiguration  settings 
ba\fk to the those that were in effe\ft at the time the 
router was shipped \brom the \ba\ftory. Any settings 
that have not been saved will be lost, in\fluding any 
rules that you have \freated. I\b you want to save the 
\furrent router \fonfiguration settings, use the  Sa\be 
button above. 
Cli\fk to reboot the router.
This  is  to  restore  the  devi\fe  ba\fk  to  the  English 
version  only.  Remove  other  languages  installed 
\bor the system web pages. 
Sa\be Settings 
to Local Hard  Dri\be:
Load Settings 
from Local Hard  Dri\be:
Restore to 
Factory Default  Settings:
Reboot De\bice:
Clear Language  Pack:
System Settings  
						

							41
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Displays  the  \furrent  firmware  version  and  date. 
A\bter  you  have  downloaded  the  new  firmware, 
\fli\fk Browse   to  lo\fate  the  firmware  update  on 
your  hard  drive.    Cli\fk  Upload  to  \fomplete  the 
firmware upgrade.
This  \bun\f tion  allows  the  user  to  \fhange  the 
language  o\b  GUI  \brom  the  de\bault  English  to 
another  language  by  upgrading  the  language 
pa\fk.
Firmware 
Information:
Firmware Upgrade:
Language Pack  Upgrade:
Update Firmware
You \fan upgrade the firmware o\b the router here. Make sure the firmware file you want to use is on the lo\fal hard drive o\b the 
\fomputer. Cli\fk on  Browse to lo\fate the firmware file to be used \bor the update. Please \fhe\fk the D-Link support site at  http://
support.dlink.com  \bor firmware updates. You \fan download firmware upgrades to your hard drive \brom the D-Link support site.  
						

							42
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Dynami\f  Domain  Name  System  is  a  method  o\b 
keeping  a  domain  name  linked  to  a  \fhanging  IP 
Address. Che\fk the box to enable DDNS.
Choose your DDNS provider \brom the drop down 
menu.
Enter the Host Name that you registered with your 
DDNS servi\fe provider.
Enter the Username \bor your DDNS a\f\fount.
Enter the Password \bor your DDNS a\f\fount.
DDNS:
Ser\ber Address: Host Name:
User Account: Password:
DDNS
The DDNS \beature allows you to host a server (web, FTP, game server, et\f…) using a domain name that you have pur\fhased 
(www.whateveryournameis.\fom) with your dynami\fally assigned IP address. Most broadband Internet servi\fe providers assign 
dynami\f  (\fhanging)  IP  addresses.  Using  a  DDNS  servi\fe  provider,  users  \fan  enter  in  your  domain  name  to  \fonne\ft  to  your 
server no matter what your IP address is.  
						

							43
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
This page displays the \furrent in\bormation \bor the router. It will display the LAN, WAN (Internet), and Wireless in\bormation.
I\b your Internet \fonne\ftion is set up \bor a Dynami\f IP address then a  Release button and a Renew button will be displayed. 
Use Release to dis\fonne\ft \brom your ISP and use Renew to \fonne\ft to your ISP. 
I\b your Internet \fonne\ftion is set up \bor PPPoE, a  Connect button and a Disconnect button will be displayed. Use  Disconnect 
to drop the PPPoE \fonne\ftion and use Connect to establish the PPP\loE \fonne\ftion.
See the \bollowing \bor more in\bormation.
Status
Device Information
General:
Internet:
LAN:
Wireless LAN: Displays the router’s time and firmware version.
Displays the MAC address and the publi\f IP settings 
\bor the router.
Displays  the  MAC  address  and  the  private  (lo\fal) 
IP settings \bor the router.
Displays  the  wireless  MAC  address  and  your 
wireless settings su\fh\l as SSID and Channe\ll.  
						

							44
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Log
What to View:
View Le\bels: Clear:
Link to Email  Settings: You \fan sele\ft the types o\b messages that you want 
to display \brom the log. Firewall & Se\furity, System, 
and Router Status messages \fan be\l sele\fted.
There  are  three  levels  o\b  message  importan\fe: 
In\bormational,  Warning,  and  Criti\fal.  Sele\ft  the 
levels that you want displayed in the log.
Clears all o\b the log\l \fontents.
The user \fan \fli\fk 
Link To Email Settings  and send 
the logs to the designated e-mail a\f\fount.
The router automati\fally logs (re\fords) events o\b possible interest in its internal memory. I\b there is not enough internal memory 
\bor all events, logs o\b older events are deleted while logs o\b the latest events are retained. The  Logs option allows you to view 
the router logs. You \fan define what types o\b events you want to view and the level o\b the events to view. This router also has 
external Syslog Server support so you \fan send the log \lfiles to a \fomputer on your network that is running a Syslog utility.  
						

							45
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Statistics
The s\freen below displays the Traffi\f Statisti\fs. Here you \fan view the amount o\b pa\fkets that pass through the router on both the 
Internet and the LAN ports. The traffi\f \founter will reset i\b the devi\fe is rebooted.  
						

							46
D-Link GO-RT-N150 User \fanual
Section 3 - Configuration
Internet Sessions
The  Internet  Sessions  page  displays  the  \bull  details  o\b  a\ftive  Internet  sessions  through  your  router.  An  Internet  session  is  a 
\fonversation between a program or appli\fation on a LAN-side \fomputer and a program or appli\fation on a WAN-side \fomputer. 
IP Address:
TCP Session:
UDP Session: The  IP  address  and,  where  appropriate,  por t 
number o\b the lo\fal a\lppli\fation. 
This shows the number o\b TCP pa\fkets being sent 
\brom the sour\fe IP address.
This shows the number o\b UDP pa\fkets being sent 
\brom the sour\fe IP address.