D-Link Router DHP-1565 User Manual

							126
D-Link DHP-1565 User Manual
Section 3 - Configuration
Time
Select the Time Zone from the drop-down menu.
To  select  Daylight  Saving  time  manually,  select 
enabled or disabled, and enter a start date and an 
end date for daylight saving time.
NTP  is  shor t  for  Net work  Time  Protocol.  NTP 
synchronizes  computer  clock  times  in  a  network 
of computers. Check this box to use a NTP server. 
This will only connect to a server on the Internet, 
not a local server.
Enter  the  NTP  server  or  select  one  from  the  drop 
down menu.
To  manually  input  the  time,  enter  the  values  in 
these fields for the Year, Month, Day, Hour, Minute, 
and Second and then click  Set Time. You can also 
click Copy Your Computer’s Time Settings.
Time Zone:
Daylight Saving:
Enable NTP  Server:
NTP Server  Used:
Manual:  
						

							127
D-Link DHP-1565 User Manual
Section 3 - Configuration
System Settings
Use this option to save the current router configuration 
settings to a file on the hard disk of the computer you 
are using. First, click the  Save button. You will then 
see a file dialog, where you can select a location and 
file name for the settings. 
Use  this  option  to  load  previously  saved  router 
configuration settings. First, use the Browse control 
to find a previously save file of configuration settings. 
Then, click the  Load button to transfer those settings 
to the router. 
This  option  will  restore  all  configuration  settings 
back  to  the  settings  that  were  in  effect  at  the  time 
the router was shipped from the factory. Any settings 
that have not been saved will be lost, including any 
rules that you have created. If you want to save the 
current  router  configuration  settings,  use  the  Save 
button above. 
Click to reboot the router.
Save Settings to 
Local Hard Drive:
Load Settings 
from Local Hard  Drive:
Restore to 
Factory Default  Settings:
Reboot Device:  
						

							128
D-Link DHP-1565 User Manual
Section 3 - Configuration
Firmware
You can upgrade the firmware of the access point from this page. Make sure the firmware you would like to use is on the local hard drive of your 
computer.  Click  Browse...  to  locate  the  firmware  file  to  be  used  for  the  update.  Please  check  the  D-Link  support  site  for  firmware  updates  at
http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.
Click  on  the Check  Now  button  to  find  out  if 
there is an updated firmware or language pack 
version. If a new version exists, download the 
new firmware to your hard drive.
After you have downloaded the new firmware, 
click Browse to locate the firmware update on 
your hard drive. Click  Upload to complete the 
firmware upgrade.
Check Online for the latest firmware version in 
order to have your router check automatically 
for new firmware upgrades.
Firmware
Information:
Firmware Upgrade:
Notification  Options:
After you have downloaded the new language 
pack, click  Choose File to locate the language 
pack  file  on  your  hard  drive.  Click  Upload  to 
complete the language pack upgrade.
Note:  In most cases you must unzip the file first 
before uploading.
Language Pack
You  can  change  the  language  of  the  web  UI  by  uploading 
available language packs.
Choose File:  
						

							129
D-Link DHP-1565 User Manual
Section 3 - Configuration
System Check 
The  Ping  Test  is  used  to  send  Ping  packets  to 
test if a computer is on the Internet. Enter the IP 
Address or host name that you wish to Ping and 
click Ping.
Th e   re s u l t s   o f   yo u r   p i n g   a t te m p t s   w i l l   b e 
displayed here.
Ping Test:
Ping Results:  
						

							130
D-Link DHP-1565 User Manual
Section 3 - Configuration
Schedules
Name:
Days:
Time: Add:
Schedule  Rules
List:
Schedules can be created for use with enforcing rules. For example, if you would like to restrict web access to Mon-Fri from 3:00 p.m. to 8:00 p.m., 
you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3:00 p.m. and End Time of 8:00 p.m.
Enter a name for your new schedule.
Select a day, a range of days, or All Week to include 
every day.
Check All Days or enter a start and end time for your 
schedule.
After making your changes, click Save to save
the schedule rule.
The  list  of  schedules  will  be  listed  here.  Click  the 
Edit icon to make changes or click the  Delete icon 
to remove the schedule.  
						

							131
D-Link DHP-1565 User Manual
Section 3 - Configuration
Device Info
This page displays the current information for the DHP-1565. It will display the LAN and wireless LAN information.
General:
LAN:
Wireless LAN: Displays the access point’s time and firmware 
version.
Displays  the  MAC  address  and  the  private 
(local) IP settings for the access point.
Displays  the  wireless  MAC  address  and  your 
wireless settings such as SSID and Channel.
Status  
						

							132
D-Link DHP-1565 User Manual
Section 3 - Configuration
Logs
The DHP-1565 keeps a running log of events and activities occurring on the AP. If the AP is rebooted, the logs are automatically cleared. You can 
save the log files under Log Settings.
Log Options:
First Page:Last Page: Previous: Next:
Clear:
Log Settings:
Refresh: You can select the types of messages that you 
would  like  to  display  from  the  log:  System 
Activity, Debug Information, Attacks, Dropped 
Packets, and Notice. Select the types you want 
to view and click Apply Log Settings Now.
This button directs you to the first page of the 
log.
This button directs you to the last page of the 
log.
This  button  directs  you  to  the  previous  page 
of the log.
This button directs you to the next page of the
log.
This button clears all current log content.
This button opens a new menu where you can
configure the log settings.
This button refreshes the log.  
						

							133
D-Link DHP-1565 User Manual
Section 3 - Configuration
Statistics
The  DHP-1360  keeps  statistics  of  the  traffic  that  passes  through  it. You  can  view  the  amount  of  packets  that  pass  through  the  LAN  and  wireless 
portions of the network. The traffic counter will reset if the access point is rebooted.
Refresh Statistics:
Click the Refresh button to refresh the Access Point’s 
traffic statistics.   
						

							134
D-Link DHP-1565 User Manual
Section 3 - Configuration
Wireless
This section allows you to view the wireless clients that are connected to your wireless access point.  
						

							135
D-Link DHP-1565 User Manual
Section 3 - Configuration
IPv6
This section will display all of your IPv6 Internet and network connection details.