D-Link Router DHP-1565 User Manual

							86
D-Link DHP-1565 User Manual
Section 3 - Configuration
The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your 
network.
Enable 
Logging 
to SysLog  Server:
SysLog Server  IP Address: Check this box to send the router logs to a SysLog Server.
The  address  of  the  SysLog  server  that  will  be  used  to 
send the logs. You may also select your computer from 
the  drop-down  menu  (only  if  receiving  an  IP  address 
from the router via DHCP).
SysLog  
						

							87
D-Link DHP-1565 User Manual
Section 3 - Configuration
Email Settings
The Email feature can be used to send the system log files and router alert messages to your email address. 
Enable Email 
Notifications:
From Email  Address:
To Email 
Address:
SMTP Server  Address:
Enable 
Authentication:
Account Name: Password:
Send Mail Now: On Log Full:
On Schedule: Schedule: When this option is enabled, router activity logs are e-mailed 
to a designated e-mail address. 
This e-mail address will appear as the sender when you receive 
a log file or firmware upgrade notification via e-mail.
Enter the e-mail address where you want the e-mail sent. 
 
Enter the SMTP server address for sending e-mail. If your SMTP 
server requires authentication, select this option.
Check this box if your SMTP server requires authentication. 
Enter your account for sending e-mail.
Enter the password associated with the account. Re-type the password associated with the account.
Click this button to send a test e-mail from the Router to verify that the e-mail settings have been configured correctly.
When this option is selected, logs will be sent via e-mail when the log is full.
Selecting this option will send the logs via e-mail according to schedule.
This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create 
a schedule, go to Tools > Schedules.
Click the Save Settings button to save any changes made.  
						

							88
D-Link DHP-1565 User Manual
Section 3 - Configuration
Use  this  option  to  save  the  current  router  configuration 
settings  to  a  file  on  the  hard  disk  of  the  computer  you 
are  using.  First,  click  the  Save  button.  A  file  dialog  will 
appear,  allowing  you  to  select  a  location  and  file  name 
for the settings. 
Use this option to load previously saved router configuration 
settings. First, use the  Browse option to find a previously 
saved file of configuration settings. Then, click the  Upload 
Settings  button  below  to  transfer  those  settings  to  the 
router. 
This  option  will  restore  all  configuration  settings  back 
to  the  settings  that  were  in  effect  at  the  time  the  router 
was  shipped  from  the  factory.  Any  settings  that  have 
not  been  saved  will  be  lost,  including  any  rules  that 
you  have  created.  If  you  want  to  save  the  current  router 
configuration settings, use the Save button above. 
Click to reboot the router.
Save Settings to 
Local Hard Drive:
Load Settings 
from Local Hard  Drive:
Restore to 
Factory Default  Settings:
Reboot Device:
System
This  section  allows  you  to  manage  the  router’s  configuration  settings,  reboot  the  router,  and  restore  the  router  to  the  factory  default  settings. 
Restoring the unit to the factory default settings will erase all settings, including any rules that you’ve created.  
						

							89
D-Link DHP-1565 User Manual
Section 3 - Configuration
This section displays information about the firmware 
that  is  loaded  on  the  Router.  Click  the  Check  Now 
button to find out if there is an updated firmware; if so, 
download the new firmware to your hard drive.
After  you  have  downloaded  the  new  firmware,  click 
Browse  to  locate  the  firmware  update  on  your  hard 
drive.  Click  Upload to complete the firmware upgrade.
Firmware 
Information:
Firmware Upgrade:
Firmware
Use  the  Firmware  window  to  upgrade  the  firmware  of  the  Router  and  install  language  packs.  If  you  plan  to  install  new  firmware,  make  sure  the 
firmware you want to use is on the local hard drive of the computer. If you want to install a new language pack, make sure that you have the language 
pack available. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your 
hard drive from the D-Link support site.  
						

							90
D-Link DHP-1565 User Manual
Section 3 - Configuration
Dynamic  Domain  Name  System  is  a  method  of 
keeping  a  domain  name  linked  to  a  changing  IP 
Address. Check the box to enable DDNS.
Choose  your  DDNS  provider  from  the  drop  down 
menu.
Enter the Host Name that you registered with your 
DDNS service provider.
Enter the Username for your DDNS account.
Enter a time in (hours).
Displays the current connection status to your DDNS 
server. 
Enable DDNS:
Server Address: Host Name:
Username or Key: Timeout:Status:
Dynamic DNS
The DDNS feature allows you to host a server (Web, FTP, Game Server, etc…) using a domain name that you have purchased (www.whateveryournameis.
com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS 
service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is.
Click the Save Settings button to save any changes made.  
						

							91
D-Link DHP-1565 User Manual
Section 3 - Configuration
The  Ping  Test  is  used  to  send  Ping  packets  to  test  if  a 
computer is on the Internet. Enter the IP Address that you 
wish  to  Ping,  and  click  Ping.  Click Stop  to  stop  sending 
Ping packets
The IPv6 Ping Test is used to send IPv6 Ping packets to test 
if  a  computer  is  on  the  Internet.  Enter  the  IPv6  Address 
that  you  wish  to  Ping,  and  click  Ping.  Click Stop  to  stop 
sending IPv6 Ping packets
The  results  of  your  Ping/IPv6  Ping  attempts  will  be 
displayed here.
System Check
Ping Test:
IPv6 Ping  Test:
Ping Results:  
						

							92
D-Link DHP-1565 User Manual
Section 3 - Configuration
Enter a name for your new schedule.
Select a day, a range of days, or All Week to include every 
day.
Check  All	Day	 -	24hrs or enter a  Start Time and End Time 
for your schedule.
Click  Save to save your schedule. You must click the  Save 
button for your schedules to go into effect.
The list of schedules will be listed here. Click the  Edit icon 
to  make  changes  or  click  the  Delete  icon  to  remove  the 
schedule.
Name:
Days:
Time: Save:
Schedule Rules  List:
Schedules
Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create 
a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm.   
						

							93
D-Link DHP-1565 User Manual
Section 3 - Configuration
This  page  displays  the  current  information  for  the  DHP-1565.  It  will  display  the  LAN, WAN  (Internet),  and Wireless  information.  If  your  Internet 
connection is set up for a Dynamic IP address then a  Release button and a Renew button will be displayed. Use  Release to disconnect from your 
ISP and use Renew to connect to your ISP. 
If your Internet connection is set up for PPPoE, a  Connect button and a Disconnect button will be displayed. Use  Disconnect to drop the PPPoE 
connection and use Connect to establish the PPPoE connection.
Displays the router’s time and firmware version.
Displays  the  MAC  address  and  the  public  IP  settings  for 
the router.
Displays the MAC address and the private (local) IP settings 
for the router.
Displays  the  wireless  MAC  address  and  your  wireless 
settings such as SSID and Channel.
Displays computers and other devices which are connected 
to  the  router  via  Ethernet,  and  that  are  receiving  an  IP 
address assigned by the router CDHCP).
Displays the Multicast Group IP address. 
General:
WAN:
LAN:
Wireless LAN:
LAN Computer:
IGMP Multicast  Memberships:
Device Info
Status  
						

							94
D-Link DHP-1565 User Manual
Section 3 - Configuration
Logs
Save Log File:
Log Type:
First Page: Last Page: Previous:
Next:
Clear:
Email Now: Click the 
Apply Log Settings Now  button save the Router’s 
log entries to a log file on your computer.
Use  the  radio  buttons  to  select  the  types  of  messages 
that  you  want  to  display  from  the  log.  System,  Firewall 
& Security, and  Router Status messages can be selected.
Click this button to view the first page of the Router logs.
Click this button to view the last page of the Router logs. 
Click this button to view the previous page of the Router 
logs.
Click this button to view the next page of the Router logs. 
Clears all of the log contents.
Click  this  button  to  open  the  Tools  > Email  Settings 
screen  so  that  you  can  change  the  Email  configuration 
for sending logs.
The router automatically logs (records) events of possible interest in it’s internal memory. If there isn’t enough internal memory for all events, logs 
of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types 
of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to 
a computer on your network that is running a Syslog utility.  
						

							95
D-Link DHP-1565 User Manual
Section 3 - Configuration
Statistics
The screen below displays the  Traffic Statistics. Here you can view the amount of packets that pass through the DHP-1565 on both the WAN, LAN ports 
and the 802.11n/g (2.4GHz) wireless band. The traffic counter will reset if the device is rebooted.
Refresh:
Reset: Click the 
Refresh button to refresh the Router’s traffic 
statistics.
Click  the  Reset  button  to  reset  the  Router’s  traffic 
statistics.