compaq lte 5000 User Manual
Here you can view all the pages of manual compaq lte 5000 User Manual. The Compaq manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 261
![Page 261
b. Lift the rear of the puller plate [4] and continue to slide back
while pulling the catch [3] out of the opening in the base.
To install the puller plate assembly, press the docking aid [3] through
the opening and slide the puller plate [1] into place (Figure 7-37).
Reverse the previous procedure to install the docking mechanism. Be sure
to use nylock screws for the docking bar and spring.
Chapter 7.19 Docking Lever and Cover
To remove the docking lever and cover, complete the following steps:
1....](http://img.usermanuals.tech/thumb/1258/38934/w300_compaq-lte-5000-260.png "Page 261
b. Lift the rear of the puller plate [4] and continue to slide back
while pulling the catch [3] out of the opening in the base.
To install the puller plate assembly, press the docking aid [3] through
the opening and slide the puller plate [1] into place (Figure 7-37).
Reverse the previous procedure to install the docking mechanism. Be sure
to use nylock screws for the docking bar and spring.
Chapter 7.19 Docking Lever and Cover
To remove the docking lever and cover, complete the following steps:
1....")
b. Lift the rear of the puller plate [4] and continue to slide back while pulling the catch [3] out of the opening in the base. To install the puller plate assembly, press the docking aid [3] through the opening and slide the puller plate [1] into place (Figure 7-37). Reverse the previous procedure to install the docking mechanism. Be sure to use nylock screws for the docking bar and spring. Chapter 7.19 Docking Lever and Cover To remove the docking lever and cover, complete the following steps: 1....
Page 262
![Page 262
4. The docking lever slider is now free to be removed [1]
(Figure 7-39). Note that the little tab on one side of the docking
lever slider [2] goes toward the outside of the expansion base at
reassembly.](http://img.usermanuals.tech/thumb/1258/38934/w300_compaq-lte-5000-261.png "Page 262
4. The docking lever slider is now free to be removed [1]
(Figure 7-39). Note that the little tab on one side of the docking
lever slider [2] goes toward the outside of the expansion base at
reassembly.")
4. The docking lever slider is now free to be removed [1] (Figure 7-39). Note that the little tab on one side of the docking lever slider [2] goes toward the outside of the expansion base at reassembly.
Page 263
![Page 263
5. Remove the screws [1] and lift out the docking lever cover [2]
(Figure 7-40).](http://img.usermanuals.tech/thumb/1258/38934/w300_compaq-lte-5000-262.png "Page 263
5. Remove the screws [1] and lift out the docking lever cover [2]
(Figure 7-40).")
5. Remove the screws [1] and lift out the docking lever cover [2] (Figure 7-40).
Page 264
![Page 264
6. Remove the docking lever cover insert [3] as shown in Figure 7-40.
Reverse the above procedures to install the docking lever, docking lever
slider, or docking lever cover.
Chapter 7.20 Security Lock Bracket
The security lock bracket simply slides into its mounting seat on the side
of the expansion base. To remove and install the security lock bracket,
complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover assembly as...](http://img.usermanuals.tech/thumb/1258/38934/w300_compaq-lte-5000-263.png "Page 264
6. Remove the docking lever cover insert [3] as shown in Figure 7-40.
Reverse the above procedures to install the docking lever, docking lever
slider, or docking lever cover.
Chapter 7.20 Security Lock Bracket
The security lock bracket simply slides into its mounting seat on the side
of the expansion base. To remove and install the security lock bracket,
complete the following steps:
1. Prepare the expansion base for disassembly as described in Section 7.3.
2. Remove the bottom cover assembly as...")
6. Remove the docking lever cover insert [3] as shown in Figure 7-40. Reverse the above procedures to install the docking lever, docking lever slider, or docking lever cover. Chapter 7.20 Security Lock Bracket The security lock bracket simply slides into its mounting seat on the side of the expansion base. To remove and install the security lock bracket, complete the following steps: 1. Prepare the expansion base for disassembly as described in Section 7.3. 2. Remove the bottom cover assembly as...
Page 265
Page 266
Chapter 8. Specifications Chapter 8.0 Introduction This chapter provides physical and performance specifications for the: o Computer o Display o Hard drives o Diskette drive o CD-ROM drive o Battery packs o MultiBay Expansion Base o MultiBay ISA Expansion Base This chapter also includes: o System interrupts o System DMA o System I/O address o System memory map Chapter 8.1 Computer Specifications Table 8-1. Computer Specifications...
Page 267
Maximum Operating Power 15 W Peak Operating Power 25 W --------------------------------------------------------------------------- AC Adapter Power Requirements: Rated Voltage 100-200 VAC RMS Operating Voltage 90-240 VAC RMS Operating Current 0.4 - 0.8 A RMS Operating Frequency Range 47 to 63 Hz AC Maximum Transient 1kV for 50 ns --------------------------------------------------------------------------- Automobile Adapter DC Input Requirements: Operating Voltage 10 to 24 VDC Operating Power 30 - 40 W...
Page 268
Configuration RGB Stripe --------------------------------------------------------------------------- Backlight Edge Lit --------------------------------------------------------------------------- Character Display 80 x 25 --------------------------------------------------------------------------- Total Power Consumption 4.0 W =========================================================================== Table 8-3. 10.4 inch Color TFT VGA Display...
Page 269
Table 8-5. 12.1 inch Color TFT SVGA Display =========================================================================== U.S. Metric =========================================================================== Dimensions: Height 7.26 in 18.45 cm Width 9.68 in 24.6 cm --------------------------------------------------------------------------- Number of Colors 64K --------------------------------------------------------------------------- Contrast Ratio 100:1...
Page 270
Width 17.28 cm 23.04 cm --------------------------------------------------------------------------- Number of Colors 256 --------------------------------------------------------------------------- Contrast Ratio 25:1 --------------------------------------------------------------------------- Brightness 70 CD/M-2 @ 6.0 mA --------------------------------------------------------------------------- Pixel Resolution: Pitch 0.288 x 0.288 mm Format 800 x 600 Configuration RGB Stripe...