Home > Comdial > Cordless Telephone > Comdial Scout 900MXS Cordless Instruction Manual

Comdial Scout 900MXS Cordless Instruction Manual

Here you can view all the pages of manual Comdial Scout 900MXS Cordless Instruction Manual. The Comdial manuals for Cordless Telephone are available online for free. You can easily download all the documents as PDF.

Page 81

9.7 Storing The Response Message Button
Section 8.4 discusses how you can respond to callers in a non
-
verbal manner. This section discusses how you can createRE
-
SPONSE MESSAGEbuttons that will send the same
preselected message every time you press it. If, for example,
you know that you want to send the messageI Will Call Back
every time you receive a SOHVA call (remember you only re
-
ceive SOHVA calls if you are using the optional headset), pro
-
gram a fixedRESPONSE MESSAGEbutton with that
message,...

Page 82


				            

Page 83

Installing The Digital
Wireless Telephone
10.1 Using Chapter Ten
The digital wireless telephone is a proprietary multiline tele
-
phone that connects directly to a digital station port.
Use the information in this chapter to learn how to install the
digital wireless telephone and its accessories.
10.2 Selecting The Installation Location
10.3 Connecting To The Station Jack
10.4 Applying Power to the Base Unit
10.5 Installing The Battery Pack
10.6 Charging The Handset’s Battery Pack
10.7 Charging Extra...

Page 84

10.2 Selecting The Installation Location
CAUTION
Your digital wireless telephone contains special purpose circuitry
that allows it to operate only when it is connected to a proprietary
digital telephone system. Because of this special design, do not
connect your digital wireless telephone to a telephone company
central office jack that is designed for industry-standard tele
-
phones.
Select a location for the digital wireless telephone to avoid ex
-
cessive heat or humidity. Place the base unit of your...

Page 85

10.3 Connecting To The Station Jack
Connect one end of the supplied four-conductor line cord to the
LINE JACK on the digital wireless telephone. Connect the
other end of this line cord to a digital station port jack.
CAUTION
- Never install telephone wiring during a lightning storm.
- Never touch uninsulated telephone wires or terminals
unless you have disconnected the telephone line at the
network interface.
- Use caution when installing or modifying telephone lines
10.4Applying Power To The Base Unit...

Page 86

10.5 Installing The Battery Pack
1.
Place the battery pack onto the handset so that it slides eas
-
ily along the ridges.
2.
Slide the battery pack up onto the handset until it clicks
into place.
To remove a battery pack, press button to unlatch the pack and
slide it from the handset.
NOTE: Do not remove the battery pack unless you intend to install a
fresh one in its place. This will ensure that the battery in the
handset will be charged as quickly as possible.
If you see a low battery notice in the...

Page 87

10.6 Charging the Handset’s Battery Pack
You must fully charge the rechargeable nickel-cadmium battery
pack before using your digital wireless telephone for the first
time. This means that you should allow the unit to charge with
-
out interruption for 8–10 hours.
If you do not intend to use the handset for more than a day, ei
-
ther store the handset on the charger or take the battery pack off
the handset to avoid draining the battery too low.
1.
Place the handset on the base unit.
NOTE: You can place...

Page 88

10.7 Charging Extra Battery Packs
The digital wireless telephone’s base unit is equipped with a
spare battery charger for charging an extra battery pack; how
-
ever, for quickest charge, always use the base unit’s handset
cradle charger.
NOTE: If you keep a spare battery pack in the spare battery charging
compartment, occasionally alternate that battery pack with the
one that is in the handset. After you install a replacement battery
pack in the handset, allow that battery pack to charge without...

Page 89

83
Installing The Digital Wireless Telephone
CHARGEPOWER BATT
CHARGE
EXP95BTC
Charging Compartment Battery Pack
Scout900MX 

Page 90

10.8 Cleaning The Battery Contacts
To maintain a good charge, it is important to clean all charge
contacts on the handset and base unit about once a month. Use
a pencil eraser or other contact cleaner. Do not use any liquids
or solvents.
84
Installing The Digital Wireless Telephone
CHARGEPOWER BATT
CHARGE
EXP95CON
F1F2F3
F4
12
4
7
F1F2F3F4
3
5
80
69#
ABC
T/CHOLDMEMOTA PTA L K
GH IPRS
DEFJKLTUVOPERMNOWXY
Contacts
Contacts
Contacts
Scout900MX 
Start reading Comdial Scout 900MXS Cordless Instruction Manual

Related Manuals for Comdial Scout 900MXS Cordless Instruction Manual

All Comdial manuals