Comdial IPrimo Speakerphone Station User Guide

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 61
•  To turn off the message and your intercom light,
—Select CLEAR.
Table 1-1  Dialing Code Table
CharacterDialing 
CodeCharacterDialing 
Code
101808
202909
303000
404space12
505–15
606:29
707 

Nonverbal Messaging
62 Comdial October, 02
LCD Message List 
(Write the attendant supplied message here)
Dial CodeMessage
01Back at (default message 1)
02Call (default message 2)
03Ask them to hold (default message 3)
04Take a message (default message 4)
05I will call back (default message 5)
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30 

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 63
5.2  Message Waiting Light and 
Messaging
If the system installer designates your IP speakerphone to have 
message-wait originate ability, you can turn on the message-waiting 
light of any other telephone. 
•  To turn on the message-waiting light (and a broken dial tone, 
if installer programmed) at another station that is idle or 
busy,
1.  Press INTERCOM.
2.  Dial  *3.
3.  Dial the extension number or press DSS/BLF button of sta-
tion to...

Nonverbal Messaging
64 Comdial October, 02
•  To turn off the message waiting light at a busy or idle 
station,
1.  Press INTERCOM.
2.  Dial  #3.
3.  Dial the extension number or press the DSS/BLF button of 
the station that was alerted. The message-waiting light of 
called station will turn off.
•  To turn off the message-waiting light during message-
delivering conversation,
—Press INTERCOM once if off-hook, twice if on-hook.
•  To receive a message at an alerted station,
Figure 5-3  Receiving a...

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 65
5.3  Response Message Delivery
By programming one or more RESPONSE MESSAGE buttons on 
your LCD speakerphone, you can respond with a variety of messages 
to many calling situations.  A scrolling RESPONSE MESSAGE 
button allows the sender to select from several different messages 
which have been programmed by the system attendant.  A fixed 
RESPONSE MESSAGE button sends the same message you previ
-
ously select each time it is pressed.  (See...

Nonverbal Messaging
66 Comdial October, 02
This page intentionally left blank 

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 67
6.  PROGRAMMING 
6.1  DSS Numbers
Storing another station extension number at a DSS/BLF program-
mable location allows you to monitor that station, dial with the press 
of one button, or pick up or hold calls at that station quickly and con
-
veniently.
•  To store an intercom number as a DSS number,
1.  Select  OPTIONS.
2.  Select  Programming.
Figure 6-1  Designating an Extension
NOTE:  Storing DSS numbers at button locations will over-...

Programming
68 Comdial October, 02
3.  Select  NEXT until the DSS option appears.
4.  Select  DSS/BLF.
5.  Press the programmable button to choose DSS/BLF button 
location.
6.  Dial the extension number.
7.  Repeat  the previous steps, or select  EXIT.
8.  PRESS SPEAKER to end. 

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 69
6.2  Speed Dial Numbers
Speed dialing is a feature that lets you store and dial frequently called 
numbers using one or two buttons.  You can store numbers for speed 
dialing at any programmable button that is not now assigned as a line 
button or other feature by the system administrator or installer or at 
the keypad numbers.
•  To store an outside number as a speed dial number, follow 
the display prompts and proceed as follows:
1....

Programming
70 Comdial October, 02
5.  Press a programmable button or dial pad button (0–9) to 
choose storage location (remember, to access second level 
storage at a programmable button, press SHIFT first)
.
Figure 6-3  Speed Dialing Options
6.  Select EDIT.
DSS/BLF 
Button-
Press button 
of desired 
station to dial 
directlyKeypad-Dial 
desired num-
ber for per-
sonal speed 
dial or dial * 
and number 
for system 
speed dial.