Comdial IPrimo Speakerphone Station User Guide

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 101
7.9.2  MUTING YOUR SPEAKERPHONE
By using the MUTE button, you can block transmission of your voice 
to the distant party. You can do this whether you are using the handset 
or the speaker.
•  To mute your station,
—Press MUTE (mute function and light turn on). You can still 
hear the distant party, but he or she cannot hear you.
•  To speak to the distant party,
—Press MUTE again (mute function and light turn off). 

Other Advanced Features
102 Comdial October, 02
7.10  Programmed Button Display
7.10.1  BUTTON FUNCTIONS DISPLAY (BUTTON 
QUERY)
You can cause the display to identify the function of each button on 
your telephone.
•  To button query your telephone,
1.  Select  OPTIONS.
2.  Select Programming.
Figure 7-10  Button Query
3.  Select  NEXT until the  Button Query option appears.
4.  Select Button Query.
5.  Press the button in question.
6.  Read the displayed information (display will hold for few 
seconds...

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 103
•  To identify the station that occupies a busy line,
1.  Press the DSS/BLF button for busy line.
2.  Read your display for intercom number of station that is busy 
on line.
•  To identify the line that a busy station occupies,
1.  Press the DSS/BLF button for busy station.
2.  Read  your display for the busy station’s line number.
7.11  Paging
Your system provides an all-call or a zone page feature that you 
access by dialing special...

Other Advanced Features
104 Comdial October, 02
At times other telephone users may page you with instructions to 
meet them on line. This is known as a Meet-Me page. You can go to 
the nearest telephone, dial a code, and be in contact with the paging 
party.
•  To reply to a Meet-Me page,
1.  Lift the handset of the nearest telephone.
2.  Press INTERCOM.
3.  Dial  78.
4.  Meet paging party on line. 

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 105
7.12  Viewing The Call Log
The Call Log feature allows you to view the last 10 outgoing calls 
made from your station. If you have caller ID, the LCD will also 
display incoming calls. Incoming calls are designated with an I next 
to the number and outgoing calls are designated with an O.
•  To view the call log,
1.  Select  OPTIONS.
2.  Select  Call Log.  
Figure 7-11  Viewing the Call Log
The LCD displays the last 10 phone numbers you...

Other Advanced Features
106 Comdial October, 02
This page intentionally left blank. 

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 107
APPENDIX A  -  FEATURE ACCESS 
CODES 
This chart provides you with a quick reference guide of the feature 
dialing codes. If you wish, you can detach these pages and keep them 
near your telephone to serve as a stand alone reference. On page 73, 
the Feature Access Code section describes a method to program these 
codes on your telephone at unused programmable buttons.
FeatureEnable CodeDisable Code
Account CodeINTERCOM  +  *04  
+  account...

108 Comdial October, 02
Call Park, Orbit 
910-990INTERCOM  +  *  +  
910  to  999
Call Park, PickupINTERCOM  +  #  + 
910  to  999
Call Pickup, 
DirectedINTERCOM  +  *4  
+ extension number
Call Pickup, GroupINTERCOM  +  #4
Clear Major Alarm 
RingINTERCOM  +   
#09
DISA AccessInstaller Assigned
Do Not DisturbINTERCOM  +   
#01INTERCOM  +   
#01 (repeat)
Do Not Disturb 
Overrideextension number  + 
*3
DSS/BLF 
ProgrammingINTERCOM  +  **3
Executive OverrideExt. Number +  *03
Hold, ManualHOLD
Hold,...

iPrimo Speakerphone Station User’s Guide
October, 02 Comdial 109
Line Groups 12-16I N T E R C O M   +                         
60  to  64
Line Pick Up From 
Any Station, Zones 
1-4I N T E R C O M   +                        
65  to  68
Line Pick Up From 
Any Station, All 
ZonesINTERCOM  +  69
Meet-Me Answer 
PageINTERCOM  +  78
Message WaitingINTERCOM  +  *3 
+ extension numberINTERCOM  +  #3  
+ extension number
Message Wait 
Retrieval#00
Operator AccessINTERCOM  +  0
Paging, All CallINTERCOM  +  70...

110 Comdial October, 02
Response MessageINTERCOM  + **6  
+ button +  01  to  30
Service ObservingINTERCOM  +  #03  
+ extension number
Speed Dial, StationK e y p a d                                   
1, 2, 3, 4, 5, 6, 7, 8, 
9, or  0
Speed Dial, System*100  to  *599*000  
to   *999*0000  to  
*1999 (Dial code 
varies with system 
programming)
Speed Dial, 
ProgrammingINTERCOM  +  **1
Station LockINTERCOM  +  #04  
+ code
Vo l u m e  S a v eINTERCOM  +   
**7
Voice-Announce 
BlockINTERCOM  +  *2INTERCOM...