Comdial Impression Non-LCD Multi-line Telephone Station User Guide

Programming Your Telephone
9.1 Storing Extension Numbers
And Feature Codes
·To store extension numbers at DSS buttons,
1. PressINTERCOM.
2. DialSS3.
3. Press programmable DSS button to choose storage location.
4. Dial extension number.
5. Press next programmable button and dial another extension
number to store.
6. Repeat previous step until you finish storing numbers.
7. PressSPEAKERto end.
·To store special-purpose feature buttons,
1. PressINTERCOM.
2. DialSS3.
3. Press programmable button to choose...

·To store a fixed RESPONSE MESSAGE button,
1. PressINTERCOM.
2. DialSS6.
3. Press programmable button forRESPONSE MESSAGEbut-
ton location.
4. Dial message number (01-30) from list of messages provided
by your system attendant or installer.
5. Press # to save programming.
6. PressSPEAKERto end.
7. Label button location.
Programming Your Telephone GCA70-314
9–2 Non-LCD Station Users Guide 

9.2 Storing Speed Dial Numbers
·To store an outside number as a speed dial number,
1. PressINTERCOM.
2. DialSS1.
3. Press programmable button (or1–0on keypad) to choose stor-
age location.
NOTE: Remember, you can store another number at a second level at a
programmable button by first pressing HOLD.
4. Press line button, or dial01–16to select line groups
1–16, or dial00for system to select line.
5. Dial number you want to store (up to 16 digits that can include
Sand#). To store hookflash in a number...

·To store an intercom number as a speed dial number,
1. PressINTERCOM.
2. DialSS1.
3. Press the button you want to program (1–0).
4. PressINTERCOMor8to preselect intercom.
5. Dial the intercom number you want to store (up to 16 digits that
can include#andS).
6. PressSPEAKER.
7. Repeat procedure for each speed dial number.
NOTE: You cannot program pauses or hookflashes with intercom
speed dial numbers.
Programming Your Telephone GCA70-314
9–4 Non-LCD Station Users Guide 

Operating Your Telephone
With A DSS/BLF Console
The DSS/BLF console has 32 additional buttons and status lights that
extend the memory button capability of an adjacent companion
telephone. The console for the Impression models is DU32X and is
shown below. The DD32X 32-button console for the DigiTech models
is shown on the following page. You can program the buttons for
automatic dialing (speed dial) or direct station selection (DSS) with
busy lamp field (BLF) using the instructions provided in this...

DD32XA
BLF LightsLine Buttons
DSS Buttons
DD32X – 32-Button DSS/BLF Console
DSS/BLF Console GCA70-314
10–2 Non-LCD Station Users Guide 

Publication Index
A
Answering Calls..................................... 2-1
Answering A SOHVA................................ 2-2
B
Background Music................................... 7-5
Blocking Voice Announce calls......................... 7-1
C
Call Waiting........................................ 3-5
Camping On........................................ 3-5
Conferencing....................................... 6-1
D
DigiTech Monitor Telephone........................... 1-3
DigiTech...

M
Making Calls........................................ 3-1
Messaging.......................................... 8-1
Monitor Telephone, DigiTech.......................... 1-3
Monitor Telephone, Impression......................... 1-2
Muting Your Telephone............................... 7-4
O
Overriding A Call/Do Not Disturb....................... 7-5
P
Paging............................................. 7-3
Programming Your Telephone.......................... 9-1
R
Ringing Tones,...

Appendix A
Quick Reference Guide
This chart provides you with a quick reference guide of the feature
dialing codes. If you wish, you can detach these pages and keep
them near your telephone to serve as a stand-alone reference. Before
dialing a feature code, make sure that you hear intercom dial tone. If
you are getting outside dial tone, you must pressTAPto get
intercom dial tone before dialing a feature code.
Feature Enable Code Disable Code
Account CodeS04 + account code
All Call 70
Attendant Calling...

Feature Enable Code Disable Code
Line Group 1 9
Line Groups 2–11 80–89
Line Groups 12–16 60–64
Line Pick Up From Any
Station, Zones 1–465–68
Line Pick Up From Any
Station, All Zones69
Meet Me Answer Page 78
Message WaitingS3 + extension no. # 3 + extension no.
Message Wait Retrieval #00
Operator Access 0
Paging, All Call 70
Paging, Zones 2–8 71–77
Paging, Meet Me 78
Park Orbit Retrieve #91–#99
Park Orbit SendS91–S99
Personal Ringing TonesSS4 + tone code
(1–8)
Redial Last Dialed Number #
Speed Dial,...