Comdial Impact Dsu Instructions Manual

3.8 Button Mapping The Stations
(Non-Square System Configuration)
You can assign (map) every programmable button at each digital station to be line-select buttons so that
they provide access to outside lines; to be direct station select (DSS) buttons so that they provide quick
access to system stations; to be special purpose buttons so that they provide telephone users with
one-button access to features; or to be idle buttons so that they provide autodial locations for the station
user.
Three idle...

Digital Telephone SystemIMI66–107
3 – 80 System Programming 

3.8.1 Account Code Button
Description:Press the account code button and then dial an account code to record a call into a
particular category without interrupting the call.
To Program:1. Dial56.“BUTTON MAPPING”
2. Dial17. “ASSIGN ACCT KEY ”
3. Select button to be programmed
—PressA1–A14, B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57 = Dial10–57or dialC10–C57.
5. DialSfor further ACCOUNT CODE button assignment
—OR—
dialSSfor next button mapping feature
—OR—
dialSSSfor next...

3.8.2 Automatic Call-Back Button
Description:When a user presses this button after they encounter a busy tone, the system will
automatically ring both the called station and the user’s station when the called station
becomes idle.
To Program:1. Dial56.“BUTTON MAPPING”
2. Dial10.“ASSIGN CALL BACK”
3. Select button to be programmed
—PressA1–A14,B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57: Dial10–57or pressC10–C57.
5. DialSfor next AUTO CALL-BACK button assignment
—OR—
dialSSfor next...

3.8.4 Call Forward Button
Description:This button provides one-button forwarding of all calls to another extension.
To Program:1. Dial56.“BUTTON MAPPING”
2. Dial11. “ASSIGN CALL FWD ”
3. Select button to be programmed
—PressA1–A14, B1–B10.
4. Select station ports (LED On = Selected).
—Station 10–57 = Dial10– 57or pressC10–C57.
5. DialSfor next CALL FORWARD button assignment
—OR—
dialSSfor next button mapping feature
—OR—
dialSSSfor configuration mode.
To clear assignment , dial5604, press button,...

3.8.6 Do Not Disturb (DND) Button
Description:Pressing the DND button prevents other stations from calling the DND station.
To Program:1. Dial56.“BUTTON MAPPING”
2. Dial07.“ASSIGN DND CODE”
3. Select button to be programmed
—PressA1–A14,B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57 = Dial10–57or pressC10–C57.
5. DialSfor further DND button assignment
—OR—
dialSSfor next button mapping feature
—OR—
dialSSSfor configuration mode.
To clear assignment , dial5604, press button, dial #...

3.8.8 Line Button
Description:Line select buttons provide access to outside lines.
To Program:1. Dial56.“BUTTON MAPPING”
2. Dial02.“ASSIGN LINE”
3. Select button to be programmed:
—PressA1–A14, B1–B10.
4. Select line ports to be assigned.
—Line port1–14= Dial01–14or PressA1–A14
—Line port15, 16 =Dial15–16or PressB1, B2
—Line port17–24= Dial17–24or pressHOLDthen pressA1–A8.
5. Repeat steps 3 and 4 until all lines are assigned.
6.
Dial
#to finish button mapping.
7. Select station port (LED On = Selected)...

3.8.10 Line Group Queue Button
Description:A station user can queue for a busy line by pressing a line group queue button.
To Program:1. Dial56.“BUTTON MAPPING ”
2. Dial15.“ASSIGN LINE GRP Q”
3. Select button to be programmed
—PressA1–A14,B1–B10.
4. Select station ports (LED On = Selected).
—Station 10–57 = Dial10–57or pressC10–C57.
5. DialSfor next LINE GROUP QUEUE button assignment
—OR—
dialSSfor next button mapping feature
—OR—
dialSSSfor configuration mode.
To clear assignment, dial5604, press...

3.8.12 Privacy Button
Description:A user engaged in a private call can press the privacy button to change a current call into
a non-private one.
To Program:1. Dial56.“BUTTON MAPPING ”
2. Dial06.“ASSIGN PRIVACY ”
3. Select button to be programmed
—PressA1–A14, B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57: Dial10–57or pressC10–C57.
5.DialSfor further PRIVACY button assignment
—OR—
dialSSfor next button mapping feature
—OR—
dialSSSfor configuration mode.
To clear assignment , dial5604,...

3.8.14 Voice Announce Block Button
Description:Telephone users can block voice announced intercom calls and station paging by pressing
this button.
To Program:1. Dial56.“BUTTON MAPPING ”
2. Dial14.“ASSIGN V. A. B.”
3. Select button to be programmed
—PressA1–A14,B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57 = Dial10–57or pressC10–C57.
5. DialSfor next VOICE ANNOUNCE BLOCK button assignment
—OR—
dialSSfor next button mapping feature
—OR—
dialSSSfor configuration mode.
To clear...