Comdial Impact Dsu Instructions Manual

3.7.2 All-Call and Zone Paging
You can program the system so that the users can make announcements to stations located in certain areas
of the site or to all of the stations. Similarly, you can program a station with one-button access to the
paging feature.
Assign All-Call Or Zone Paging Feature
Description:Telephone users can receive voice announcements through their telephone loudspeakers,
or through an external paging amplifier and speaker connected to a PA port. They can
transmit these voice...

Assign All-Call and Zone Paging Button
Description:If you wish, you can assign a paging button to provide a station with one-button access to
the all-call and zone paging feature.
To Program:1. Dial56. “BUTTON MAPPING ”
2. Dial09.“ASSIGN ZONE”
3. Select button to be programmed (LED On = Paging Button).
—PressA1–A14,B1–B8.
4. Dial1–3for zone 1–3“ASSIGN ZONE X ”
—OR—
dial4for all-call.“ASSIGN ALL CALL ”
5. Select station ports (LED On = Button Assigned To Port)
—Station 10–57: Dial10–57or pressC10–C57.
6....

3.7.3 Audible Monitoring
The DSS/BLF at a multiline station provides a visual indication of idle, busy, and ringing status of the
monitored stations. You can also provide audible indication of direct and delayed ringing for selected
stations; however, you must first enable the station monitoring feature on a system-wide basis.
Enable Audible Monitoring
Description:Enable audible monitoring on a system-wide basis using this feature.
To Program 1.Dial20.“MONITOR XXXXXXX”
2. PressA1to switch between enable...

3.7.4 Automatic Hold
You can give station users the ability to place an existing line or intercom call on hold when she or he
presses another line button.
Automatic Hold With Line Calls
Description:When you enable this feature, the telephone user can automatically place an existing line
call on hold when she or he presses another line button to answer a second call.
To Program:1. Dial53.“STATION FEATURES”
2. Dial11.“AUTO HOLD ”
3. Select station ports (LED On = Feature Assigned).
—Station 10–57:...

3.7.5 Automatic Privacy
You can make a line private or non-private. In the private mode, a station has exclusive use of a line
during a call. You can arrange for individual stations to automatically release privacy while on private
lines.
Make A Line Private Or Non-Private
Description:Use this feature to make a particular line private or non-private.
To Program:1. Dial40.“PRIVACY RELEASE ”
2. Select line ports to be non-private (LED On = Non Private Port)
—Line port 1–14 = Dial01–14or PressA1–A14
—Line...

3.7.6 Call Forward On Busy/Ring–No Answer
The system can automatically forward busy and ring-no answer calls to a new station. The system sends
these calls to any idle station associated either by intercom hunt group or by department with the called
station. Use this feature to arrange for calls to cycle rapidly through such associated stations by testing
each one in turn with several rings.
Enable Call Forwarding
Description:Enable call forwarding for individual stations using this feature.
NOTE:If you...

Intercom Hunt Group
Description:You can link stations together to form intercom hunt groups. Calls to a busy station in a
hunt group will search the group for an idle station to ring.
To Program:1. Dial53.“STATION FEATURES”
2. Dial18.“HUNT LINK”
3. Select first linking station
— Station 10–57 = Dial10–57or pressC10–C57.
4. Select second linking station
—Station 10–57 = Dial10–57or pressC10–C57.
5. DialSfor another link
(Example A: 17 to 16, 18 to 16 and 19 to 16)
(Example B: 16 to 17, 17 to 18, and 18 to...

3.7.7 Call Origination Denied
Description:You can deny users of selected stations the ability to originate calls on specified lines.
This feature does not prevent the user from answering incoming calls on these lines.
To Program:1. Dial54.“STA/LINE CONFIG.”
2. Dial6.“ORIGINATION DENY”
3. Select line ports (LED On = Selected Ports).
—Line port 1–14 = Dial01–14or pressA1–A14
—Line port 15, 16 = Dial15,16or pressB1,B2
—Line port 17–24 = Dial17–24or pressHOLDthen pressA1–A8.
4. Dial#when all line ports are...

3.7.9 Data Security Port
Description:While port is active on a call, this feature prevents any incoming tones associated with
other system features from interrupting the call.
To Program:1. Dial53.“STATION FEATURES”
2. Dial26.“DATA SECURE PORT”
3. Select station port (LED On = Feature Assigned)
—Station 10–57: Dial10–57or pressC10–C57.
4. DialSfor next station feature
—OR—
dialSSfor configuration mode.
To clear current setting, repeat procedure.
3.7.10 Dual Console Feature
Description:The dual console...

3.7.11 Executive Override
Description:You can provide selected stations with busy override. This feature allows the station to
override a busy condition at a station, sound a warning tone, and gain access to the
existing conversation.
To Program:1. Dial53. “STATION FEATURES”
2. Dial02.“EXEC. OVERRIDE ”
3. Select station ports (LED On = Feature Assigned)
—Station 10–57: Dial10–57or pressC10–C57.
4. DialSfor next station feature
—OR—
DialSSfor configuration mode.
To clear current setting, repeat...