Home > Comdial > Communications System > Comdial Executech System 2000 Lcd Instructions Manual

Comdial Executech System 2000 Lcd Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Comdial Executech System 2000 Lcd Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 133 Comdial manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Call Forwarding (continued) . . . 
    CALL FORWARD - ALL 
    To forward all calls to another telephone, 
    . 
    Press @ . 
    l Dial a @. 
    I 
    l 
    Dial extension number of station to which calls are 
    to be forwarded. 
    Display: 
    XXXX = Station name or number. 
    To cancel all-call forwarding 
    . 
    Press @. 
    l Dial a @ . 
    NOTE: For each intercom call received during call forward, a 
    ring reminder (short tone burst) will be heard at the 
    called station to remind the user that calls are being for- 
    warded. 
    Pulse/Tone Switching. . . 
    If the local telephone service is pulse (rotary) but tone generation 
    is required during the call, convert to tone while dialing: 
    . 
    Press m at point in dialing sequence where 
    conversion to tone is required. (System will switch 
    back to pulse dialing when call is ended.) 
    NOTE: Pulseflone switching can be programmed into softkeys 
    by pressing m during autodial or speed dial num- 
    ber storage. 
    38  
    						
    							Background Music. . . 
    Music must be supplied by the system before it can be turned on 
    at a telephone. 
    To turn music on, 
    l Press tTcM . 
    0 
    0 
    Dial a a . (Speaker light will turn on.) 
    l Adjust loudness of music with call monitor speaker 
    volume control. 
    To turn music off, 
    l Press @ . 
    . 
    Dial a (1) . (Speaker light will turn off.) 
    NOTE: Background music automatical& turns off during calls. 
    Automatic Call-Back. . . 
    To arrange for the system to call back when a busy telephone 
    becomes idle, - 
    l Make intercom call. 
    l Dial a @. 
    Display: Hear busy signal. 
    XXXX = Station name or number. 
    l Hang up. Calling telephone will receive five unique 
    tone bursts when called telephone becomes idle. 
    Continued on next page. . . 
    39 
    : 
    .“..__ 
    . . ._,. 
    LT.:: 
    2-7. 
    :), - , 
    ‘.< :  
    						
    							Automatic Call-Back (continued) . . . _ 
    To answer call-back ring, 
    l Lift handset. Called telephone will ring. 
    :.- 
    NOTE: Call-back is canceled if handset is not lifted. :‘I 
    -,-: 
    ,.“. 
    iQ 
    a:: 
    To cancel automatic call back before it rings, 
    0 
    l Press fTcM . : 
    l Hang up. 
    Ringer Volume Control. . . 
    Every station is equipped with an individual ringer volume control. 
    Set the ringer control lever to OFF, LOW or HIGH volume as 
    desired. 
    Display In ten&y Adjustment 
    The intensity (brightness and contrast) of the display can be 
    adjusted to a desired operating level any time while the telephone 
    is idle and on-hook. 
    To do so, 
    l Press and hold the @ key. The automatic ad- 
    justing cycle will begin in approximately 5 seconds. 
    Display: 
    b Release the @key when the intensity is at the 
    desired level. 
    40  
    						
    							The optional speakerphone can exercise the previously described 
    features in a handsfree manner. Handsfree calling and call answer- 
    ing is as described below. 
    To place a call, 
    l Press line or tTcM . 
    0 
    l Dial number or press softkey. 
    l When party answers, speak toward the telephone. 
    To answer a call, 
    l Press line key. 
    l Speak toward the telephone. 
    To end a call, 
    l Press SPKR . 0 
    To switch from speakerphone to handset, 
    l Lift handset. 
    To switch from handset to speakerphone, 
    l Press WI . 0 
    l Hang up handset. 
    41  
    						
    							EXECUTECH 
    MVLTlLlNE 
    FEATURE SINGLE-LINE 
    TELEPHONES KEYSETS 
    All Call Page 
    ITCM 87 I 547 
    Attendant Call,nQ 
    Automatic Redialing 
    Background Music On 
    -. 
    ITCM 0 0 
    Programmed Softkey rea 
    ITCM tk 1 
    Na  
    						
    							LINE SELECT LIGHTS 
    G 
    Multiline Keysets 
    Idle 
    Ringing 
    In use-your station 
    In use-other station 
    Steady on 
    On hold-your statlon Winking with repeative off perlods 
    (winking rate - 560 msec. off) 
    On hold-other station 
    Continuous winking 
    (490 msec. on - 70 msec. Off) 
    ixcluswe hold Steady on 
    Held call timeout your 
    station Flutter with repeatlve off periods 
    (flutter rate 560 msec. off) 
    Held call timeout other 
    station Continuous flutter 
    (70 msec. on 70 msec. off)  Steady off 
    Continuous flash 
    (560 
    msec. on 560 msec. off) 
    J 
    1 
    Steady on with wink off 
    (2.3 sec. on 70 msec. off) 
    -I 
    u  
    						
    							INTERCOM LIGHT 
    Multiline Keysets 
    In use-your station 
    All links busy Steady on with wink off 
    (2.3 sec. on - 70 msec. off) 
    Steady on u 
    Auto redial active 
    Continuous flutter 
    Messaging display (70 msec. on - 70 msec. off) 
    I I 
    I 
    Night mode 
    -Station 10 and 12 Flutter with repeative off periods 
    (flutter rate - 560 msec. off)  
    						
    							I--- 
    L 
    : 
    c 
    C 
    C 
    C 
    C 
    C 
    C 
    C 
    C 
    C 
    C 
    - 
    1  
    						
    							1 
    46  
    						
    All Comdial manuals Comments (0)

    Related Manuals for Comdial Executech System 2000 Lcd Instructions Manual