Comdial Executech System 2000 Lcd Instructions Manual
Here you can view all the pages of manual Comdial Executech System 2000 Lcd Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 51
$ INTERCOM CALL PROGRESS TONES (Heard through handset receiver or over monitor speaker) Dial Tone Continuous on -I Called station ring-back One sec. on and 3 sec. off. L Base level program entry System speed dial entry confirmation 80 msec. tone burst soundedonce Vight transfer active xmfirmation Memory dial intercom, line, group and/or recall selection confirmed All-call page selection confirmed n PA station pofi/line port selection confirmed Error tone - 500 msec. lone burst...
Page 52
INTERCOM CALL PROGRESS TONES - continued Busy tone Overnde feature not allowed Nignl transfer feature not allowed Called station in do-not- disturb mode X-back busy feature or System is awaiting memory dial number or key mapping entry after location is soecified Override feature on warning tone 500 msec tone bursts sounded continuously 140 msec.tone burst sounded twice every sec. 320 msec. tone burst sounded once 80 msec. tone bursts sounded continuously 80 msec tone bursts...
Page 54
Access denied: Access to particular lines can be denied at certain stations through programming. Add-on conference: Two stations, while operating in a private mode, can join an outside call. All-call and zone paging: Multiline station can receive voice an- nouncements through the telephone speaker. All intercom links busy: When all intercom paths are busy, the intercom light turns on steady. Area paging: Dialing an access code or pressing a dedicated line key can provide access to an external...
Page 55
Call announce with handsfree answerback: An internal speaker at each telephone provides call-announce capability over the intercom link. Call forward: User can designate another telephone to receive intercom calls normally directed to the user’s telephone. Call messaging: This feature allows a station user to light a personal message lamp at an unattended station or transfer to a message center using the call messaging access code. Call pickup: A call can be answered at one telephone when it is...
Page 56
Idle line preference: With this feature, going off-hook automatically selects an idle line for use. LCD messaging: Standard and special purpose messages can be set on the display and sent to a calling telephone display. Line monitoring: Monitoring of dialing and call progress with the hand- set on-hook. Last number redial: The last number previously dialed can be automat- ically redialed. Line groups: System arrangement which groups certain lines together in up to four different groups. This...
Page 57
. n Personal ringing tones: A multiline station can be arranged to ring in one of four distinctive tones. Prime line: A line designated to a particular telephone and automatically selected when that telephone is taken off-hook. Privacy release: A line can be programmed to be non-private at a particular station while remaining private at all other stations. Pulse/Tone switching: A switch between pulse (rotary dial signals) and tone (dual tone multiple frequency signals) signalling can be...
Page 58
Unscreened transfer: Call is transferred to another telephone without first being identified to it. Ip1 Voice signal blocking: A station can be set to block voice calls sent to it over the speaker. 55
Page 59
SYSTEM SPEED DIAL 01 11 02 12 03 13 04 14 06 16 07 17 08 18 09 19 PERSONAL SPEED DIAL 21 d= 22 ?--- 27 28 29 t- 30 0 5 1 6 2 7 3 8 4 52 56