Comdial Executech Lcd Speakerphone Instructions Manual

							D 
E 
I 
L 
M Call waiting tones: A signal can be sent to a busy 
telephone indicating that a call is waiting. 
Direct telephone selection/busy lamp field: One-key 
intercom calling with visual indication of telephone 
status. 
Do not disturb: Incoming call ringing and intercom 
calling are disabled. 
Dynamic line key: System temporarily assigns a nor- 
mally unassigned line to an idle line key for certain 
call handling operations, 
Exclusive hold: Only the telephone placing call on 
hold can retrieve it. 
Executive override: A calling telephone can break 
into a conversation at a busy called telephone. 
Idle line preference: With this feature, going off-hook 
automatically selects an idle line for use. 
last number redial: The last number previously dialed 
can be automatically redialed. 
line groups: System arrangement which groups cer- 
tain lines together in up to four different groups, 
This feature allows lines to be accessed by dialing 
line group codes. 
line monitoring: Monitoring of dialing and call 
progress with the handset on-hook. 
line queuing: A telephone can be placed in a con- 
dition where it awaits the availability of a line or 
line group. 
Message waiting: A light can be activated at a 
telephone by a central message desk telephone 
to indicate that a message awaits pick-up. 
Mute: A user’s voice can be blocked to the distant 
party during a call. 
31  
						

							P 
Personal ringing tones: A telephone can be ar- 
ranged to ring in one of four distinctive tone. 
Prime line: A line designated to a particular 
telephone and automatically selected when that 
telephone is taken off-hook. 
Pulse/Tone switching: A switch between pulse (rotary 
dial signals) and tone (dual tone multiple frequen- 
cy signals) signalling can be effected. 
Recall/flash: Either a recall (line disconnect or hang- 
up) or flash (PBX feature select signal) can be 
generated. 
S 
Saved Number Redial: The last number previously 
dialed can be saved and automatically redialed 
later. 
Screened transfer: Transferred call is identified before 
transfer is made. 
Station speed dialing: A personal list of numbers can 
be programmed for automatic dialing by a user. 
System speed dialing: A special system-wide list of 
numbers are available for automatic dialing by all 
users. 
U 
Unscreened transfer: Call is transferred to another 
telephone without first being identified to it. 
v 
Voice signal blocking! A telephone can be set to 
block voice calls sent to it over the speaker. 
32