Comdial Executech Lcd Speakerphone Instructions Manual

Executech LCD 
Speakerphone 
This user guide is applicable for the following system 
models: 
l 14328 Rev F and later 
l K2232C Rev C and later 
l K2264 Rev C and later 
l K2296 Rev C and later 
User’s Guide ; 
GCA 70-135.02 
2190  

Table Of Contents  

4  

Introduction 
This Executech LCD Speakerphone provides the 
user with a Liquid Crystal Display (LCD) in addition 
to the many standard available features. In the 
idle state, this l&digit LCD provides a desk clock 
and calendar combination, When a call is in 
progress, an elapsed time display provides a con- 
stant reminder of call duration. Other call handling 
and information displays make telephone use 
easier and more efficient. 
All display functions occur automatically as call 
processing and...

The Basics 
Placing A Call 
0 Press line key to select line. 
Or 
0 If line groups are provided, press ITCM then dial access 
code for desired group. 
NOTE Selecting a line is not necessary if a line has 
been assigned to you or if your telephone automatical- 
ly picks an idle line for use when the handset is lifted. 
A system selected idle line that is normally not assigned 
to your telephone may appear on a line key reserved 
for that purpose during the time that the line is in use (if 
this feature is...

When party answers, 
a Speak toward telephone or lift handset for private con- 
versation 
To return to speakerphone from handset, 
0 Press MNTR key. R Hang up handset. 
To end call, 
0 Press MNTR key or hang up handset if engaged in 
private conversation. 
Call Timer 
RESULTS: Approximatetly twenty seconds after dialing is 
complete Call Timer shows elapsed time of call. 
RESULTS: Elapsed time will show for ten seconds after call 
is completed. 
To recall elapsed time any time after display has dropped...

,continued from previous page) 
line key reserved for that purpose when it is answered. 
(if this feature is programmed). 
RESULTS: Display will show answered line, 
Placing A Call On Hold 
Marauca~ hold (Any telephone with line appearance can retrieve 
held call.) 
0 Press HOLD. 
To return to call on hold, 
0 Press line key with flashing light. 
Exclusive 
hold (Only your telephone can retrieve held call.) 
0 Press HOLD twice. 
Hold recall feature 
After a preprogrammed length of time, a call 
placed on...

Voice Calling 
0 Lift handset. 0 Press ITCM. 0 Dial extension number. 
(To call system operator, dial 0.) 
RESULTS: Display will show dialed extension. 
~ 
.,. . . . . . . . . . . . . . . . ,...,................... 
0 Speak to called party. 
Tone Calling 
0 Press ITCM. 0 Dial extension number, 
RESULTS: Display will show dialed extension. 
~ 
.,.,.,........ 
B Press ITCM again. 
RESULTS: Called telephone will ring. 
When called telephone answers, 
0 Speak toward telephone or lift handset for private con-...

(continued from previous page) 
NOTE: Voice calling can be blocked. See the discus- 
sion titled, Voice Signal Blocking for details. 
To answer a tone call, 
0 Lift handset to 
talk or press ITCM and speak toward 
telephone. 
Direct Station Selection/Busy Lamp Field - DSS/BLF 
(One key intercom calling with visual indication of telephone 
status) 
To program, 
0 Press ITCM. Listen for tone. Cl Dial 85. Tone will stop. 
0 Press memory key. Cl Dial extension number. 0 
Repeat last two steps for all desired...