Comdial Executech II Model 816 Instructions Manual

Programming 
_ 
IMI 66-031 , 
Table 2c. STATION COS PROGRAMMING REFERENCE 
selects table 2 
select8 table 9 
throughaselects 
tables 4 through 8 
If a tlme out occurs 
pertorm base level en 
2. Reanter the statlo ve at Ume out. 
67-68 (d)  

Programming IMI 66-031 ,, 
1 
1 
1 
1 
1 
1 
1 
1 
1 
1 
: 
: 
: 
: 
d 
d 
4 
Table 2c. STATION COS PROGRAMMING REFERENCE 
NOTE 
uence, 
q 
INATION DENIED) 
Auto Prtv. Rd. 
It a tlme out occurs 
perform bare level ent 
2. Reanter the ttstlo e progmmmlng sequence, 
nd proceed 
l l program step 
ber that was ectlve et ttme out. 
67-68 (e) 
.: 
-.  

Programming IMI 66-031 : 
Table 2c. 
STATION COS PROGRAMMING REFERENCE 
Circle of enter the record Enter fnformetton or ctrcta dedred valuer below befon 
SlBLF CONSOLE Porl) 
DBWBLF Consote Port 
-bu memory dldlnp ferturer button@ 
selects table 1 
Delayed Ringing 
IS. Presr all desired 
28. Press 
q to dlrrble button and light 
2% Repeat stepr 27 end 28 for each unused Ilne 
30. Press 
q 
NOTE 
If a Umr out occurs durtng the programmlng sequence, 
perlorm base level entry 
l gain and proceed at program...

Programming IMI 66-031 , 
. 
f = _ 
*.. 
Table 2c. STATION COS PROGRAMMING REFERENCE 
NOTE 
Enkr lnformrtlon or circle derlred valueo below before 
(DSWBLF CONSOLE 
Port) 
l atures buttons 
(LINE APPEARANCE/BUl-TON ASSIGN.). 
25. Prerr key tar selected line q - 
26. Repeat steps 24 and 25 for each arrlgned line 
26. Prerr 
q to dlrable button and light 
Lg. Repeat steps 27 and 26 tar each unused line 
NOTE 
If a Ume out occurs durtng the programmlng requence, 
pertorm base level entry agaln and proceed...

Programming 
Table 2c. 
STATION COS PROGRAMMING REFERENCE 
s 
IMI 66-031 
,: 
Cole of enter the record VOIUW at right before p-1 
with the prognmmlng proc+dure gtven WOW. j---_ Informetion or drcte derlred voluee betow belore 
Ing the prognmmlng 
promdun given on the Mt. 
PftmeLtne 
-Prerr memory diellng teeturea button, 
~eelecte table 1 
eelectr table 2 
eelects teble 3 
l electr tebler 4 th 
Delayed Ringing 
to dlsrble button and light 
ps 27 and 28 for rech unueed line 
NOTE 
II a time out occurs...

Programming 
IMI 66-031 
i-- 
f-.. . Table 2c. STATION COS PROGRAm4ING REFERENCE 
PROGRAMMING RECORD (Shading Donotos System Dafautt Vatuos) 
NOTE NOTE 
Cfrcla or enter the record values at right betore proceeding Enla tnformatton or drcte dcrlred values &low baforo 
Mh the programming procedure given below. pertormlng the programming procedure given on the left. 
1. Base kvel program entry 
Statlon Locatton: 
:!zz~ 
. 
2. Press two keys tor atatton number (I.e. 
q q = 12) Btatton Intercom Numben 
3.Preu...

Programming 
a 
IMI 66-031 : 
Table 2c. STATION COS PROGRAMMING REFERENCE 
PROGRAMMING RECORD (Shading Denotea System DefeUn Vduea) 
NOTE NOTE 
Trcle or enter the record velues ~1 right before prooeedlng Enter InformatIon of cfrcle deslred uelues below before 
dlh the progremmlng procedure glwn below. pertormlng the ProgrammIng ~rooedure gken on the IeH. 
1. Bese ievel program entry Stetlon Location: 
a. Press 
b. Press ‘F 
; zi lntequenco. a 
q & q 
2. Press two keys for stetlon number (Le. q q = 12)...

Programming 
IMI 66-031 
Table 2c. 
STATION COS PROGRAMMING REFERENCE 
PrfmeLtne 
selects table 3 
throughaselectr tables 4 through 8 
toll Rettrktlon q q q 
17. Press all deslred 
tf a time out occurs 
perform base level en 
2. Re-enter the rtatlo mmlng sequence, 
ed al program step 
active at time out. 
67-68 Ik) 
. . . .- -_____I_ .--- _.  

Programming 
. 
IMI 66-031 i 
Table 2c. STATION COS PROGRAMMING REFERENCE 
selects tablr 2 
selects table 3 
through~selects tables 4 thro 
It a tlme out occurs 
perform base level en 
2. RI-enter the rtatlo ogrammlng sequence, 
roceed at program step 
was active at time out. 
67-68 (1)  

. 
Programming _ 
IMI 66-031  
L . 
Table 2c. STATION COS PROGRAMMING REFERENCE 
(DSS!BLF CONSOLE P&) DSS/BLF Consote Port 
rtum buttons 
14. Press (CALL ORIGINATION DENIED) 
NlGHT ANSWER RINGING 
24. Press one CWBUTTON ASSIGN.). 
26. Repro1 steps 24 and 25 lor each arrlgned line 
If a tlme oul occun during the programmlng sequence, 
perform base level entry 
l gain and proceed at program step 
2. Re-enter the statlon number that was active at time out. 
67-68 bn)