Home
>
Comdial
>
Communications System
>
Comdial Eloquence VE Voice Mail For Executech Instructions Manual
Comdial Eloquence VE Voice Mail For Executech Instructions Manual
Here you can view all the pages of manual Comdial Eloquence VE Voice Mail For Executech Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 2
Table of Contents Section 1 General Descriotion 2 Hardware Installation 3 Svstem Proaramminq 3.1 200 Initialize System 3.2 201 Telephone Type 3.2 203 Operating Mode 3.3 204 Extension Length 3.3 205 Station Ringback 3.3 206 Transfer Mode 3.3 214 Set Time 3.3 216 Set Date 3.4 320 Administrator Password 3.4 322 Programmer Password 3.4 268 Record Time Remaining 3.4 226 Record Quality 3.4 600 Printed Reports 3.4 4 Auto Attendant Proaramminq 328 Busy Recording 330 No Answer...
Page 3
Table Of Contents 2 6 Advanced Auto Attendant Proaramminq 342 344 358 360 362 364 347 348 350 351 352 353 354 370 371 372 375 377 379 382 384 386 Add/Change/Delete Branch Branch Recording and Programming Name Key Length Name Recording Time Record Directory Names Playback of Names Outdial Branch Reroute Busy Reroute No Answer Operator Translation Reroute Operator Reroute No Response Alternate Extensions Extension Privacy Blind Transfer Extensions Announce Extension...
Page 4
Eloquence VE General Description I .I General Description Eloquence is able to operate as a stand alone auto attendant, a stand alone voice mail system, or a combination of both. This manual is designed for all combinations, simply skip any section that pertains to features not used. The system is housed in a metal case that can be located on a desk top or wall- mounted in the telephone equipment room. The system is powered by an external power transformer while an internal battery provides for...
Page 5
Eloquence VE Directory Example General Description 1.2 The system’s call routing follows a branch concept whereby the caller is routed through a series of branches to the extension he wishes to reach. He moves from branch to branch by selecting a number or name presented in an announcement. 7hankyou for cattmg ABC, you may dialan saiension if known at any time, to reach Sales press 1, Service press 2, Accounting 3, Engineering 4, for an employee dimtoy pros.5 5. N calling from a rota&‘phone,...
Page 6
Eloquence VE General Description 1.3 If the caller selects sales by pressing 1, he will reach another menu branch to guide him to the appropriate sales department (as well as given a chance to return to the main menu). The two dial branches could be programmed to either: always send the first call to the top of the list and, if busy, down the line until answered; or rotate calls evenly among the extensions listed. The jump branches have been used to redirect the caller to another section of the...
Page 7
3 Eloquence VE General Description 1.4 The Administrator Manual provides details of all functions that are programmable by the administrator. All announcements can be recorded by the installer during the initial set-up and then, when satisfied that the system is programmed according to the customer’s needs, the announcements and names can be re-recorded in the customer’s voice. Advanced Features Most applications can be programmed using the standard features sections: Sections 3, 4, and 5....
Page 8
Eloquence VE Hardware Installation 2.1 Hardware Eloquence is designed as a stackable desktop unit or is wall-mountable by use of the Installation two mounting holes located on the bottom of the unit (requires two #IO screws mount- ed vertically, 8” apart). Connect a 14 or heavier gauge ground wire to the screw connecting the case halves at the right rear side of the system to a good earth ground such as a cold water pipe or ground rod. LED Indicators @@@ Power/ Port Port Battery One Two The...
Page 9
Eloquence VE Hardware Installation 2.2 Before proceeding, connect a multiline telephone to the ports and verify that they are functioning. A multiline set can make and take calls even though the port is programmed as OPX, Single Line, or Execumail (the lamps, however, will not work). Place an intercom call to Eloquence, Eloquence will answer with “Enter” or “Enter Function”, Begin programming. Before Cutting Over Flexible ringing programmed as direct or delayed at Eloquence’s ports, Ringing line...
Page 10
, Eloquence VE System Programming 3.1 Eloquence Programming To program Eloquence, dial the extension that Eloquence is connected to and enter the programming mode by dialing in the appropriate password. Once entered for pro- gramming, Eloquence prompts and confirms each action with voice commands. Both data and recordings are entered in the same manner, using a series of key- strokes. Each function is programmed by entering it’s specific function number and then following the voice prompts....