Comdial Dxp Plus Digital Communications System Instructions Manual

DXP Plus Programming InstructionslMi66-123
14.5.3Arranging Voice Mail Ca// Transfer ParametersAutomatic Attendant Transfer On Busy
Description:
With automatic attendant transfer on busy enabled, the system will ring a busy telephone when
the voice mail system is attempting to transfer a call to that station. This action gives the user of
the called station the option of interrupting his or her present call and taking the new call.
With automatic attendant transfer on busy disabled, the presence of a new...

14.5.4Assianina Transfer-To-Voice Mail ButtonDescription:
A system user can use a pre-programmed button to transfer an incoming call directly to a voice
mail box so the caller can leave a message. You must use the button mapping programming
procedure to assign this Transfer-To-Voice Mail button at a system telephone.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select stations and press ENTER.
3. From stations menu, select button mapping and press ENTER.
4. Type prime intercom number...

DXP Plus Programming InstructionslMl66-123
14.5.6Assigning Voice Mail Identification (ID) Number
Description:As an option, you can assign an identification number to each DXP Plus line so that the voice
mail system can provide customized call handling on a per line basis. Use voice mail system
programming to match this ID number to a particular personal directory or transaction box
within the voice mail system.When the DXP 
PZus routes a call that is ringing at a particular
line to the voice mail system...

/M/66-123DXP Plws Programming fnstrwcti~ns
14.5.8Setting The Voice Mail Integration Digits
Description:You can choose the DTMF digits that the DXP Plus sends to a voice mail system. A voice mail
system uses these DTMF digits to determine system and station status so that it can properly
process a call. You must be versed in your voice mail’s requirements before you can assign
DTMF integration digits in the DXP 
Plus. The system defaults the voice mail parameters to
match the Comdial voice mail system....

DXP Plus Programming Instructions/M/66-123
Programming The Voice Mail Integration Digits
Programming:1.Press CONTROL T for main menu.
2.From main menu, select peripherals and press ENTER.
3.From peripherals menu, select voice mail and press ENTER.
4.From the voice mail menu select integration digits and press ENTER.
5.From the integration digits menu, type row number for item and press ENTER.
6.Type entry and press ENTER.
7.Repeat step 6 until finished.
8.When finished, press ESCAPE twice.
9.Type y to...

/M/66-123DXP Plus Programming hstrwtions
14.6Modem SetupDescription:
The system supports the operation of the DXMDM serial data modem. The DXMDM is a
general-purpose, Hayes*-compatible, 300, 1200, and 2400 automatic baud detect, serial data
modem that receives its operating power and configuration programming from the DXP 
PLUS
system. The CPU board provides a dedicated serial data port for DXMDM modem use. Install
and connect the DXMDM per the details described in IMI89 185, Installation Instructions...

Configuring The System’s
Board Layout
l Understanding The Board Configuration........15.1
l Examining The Board Status..............15.2
l Adding Boards To The System.............15.3
l Deleting Boards From The System...........15.4
l Moving Boards Within The System...........15.5
Board Layout Programming 15-1 

lMl66-123DXP Plus Programming hstructions
15.1Understanding The Board Configuration Feature
Because there are no dedicated station or line ports in the DXP plus, the system uses an automatic configuration
method to logically number its stations and lines. Automatic configuration occurs after you perform a master clear
on the system.
How automatic
configuration
works
How logical
number and
physical
location relate
to one another
Where you can
place circuit
boards
Adding boards
without
renumbering
With...

152Examining The Board StatusDescription:This programming procedure allows you to examine the board layout for the entire system and
determine each board’s operating status.
Programming:1. Press CONTROL T for main menu.
2. From main menu, select board configuration and press ENTER.
3. From board configuration menu, select status and press ENTER.
4. From the ensuing screen presentation, examine the board status for the system.
5. When finished, press ESCAPE twice.
15.3Adding Boards To The...

Index
A
Abandon Hold Release8.1.10
Absorb Ring Time (for Caller ID), Setting14.1.2
Account Code (For Class Of Service)IO.35
Account Code (System Parameters)
10.1.5, 10.3.1
Account Code Display And Account Code Display Time10.1.6, 10.3.2
Account Code Length10.1.7, 10.3.3
Account Code Programming10.3.4
Account Codes (Forced with Positive Verificatiori).l.l,lO.3
10.3.4
7.1.40
9.3
7.1.41
7.2.24
8.4.2
10.1.2
Account Codes, Add, Remove, Display
Account Codes, Forced
Adding Intercom Numbers
Allow Busy Display...