Comdial Dxp Correspondance Instructions Manual

DXP PeripheralsDXP Correspondence Manual
Arranging Voice Mail Ringing Options
(Station Menu, 7.14)
The DXP system automatically enables ringing line preference at the
voice mail station ports. With this feature enabled, the voice mail
system’s automatic attendant will answer calls. You can use direct,
delayed, or night ringing features to determine how quickly or when
voice mail answers the calls. With direct ringing, calls ring at the
voice mail port immediately. With delayed ringing, the calls direct...

DXP Correspondence ManualDXP PeripheralsSetting The Voice Mail Integration Digits
You can choose the DTMF digits that the DXP sends to a voice mail
system. A voice mail system uses these DTMF digits to determine
system and station status so that it can properly process a call. You
must be versed in your voice mail’s requirements before you can
assign DTMF integration digits in the DXP. The system defaults the
voice mail parameters to match the Comdial voice mail system.
Certain applications in countries...

DXP PeripheralsDXP Correspondence ManuaPDND 
- If the voice mail system transfers a call to a station that is in
the do not disturb (DND) mode, the DXP sends this DTMF digit to the
voice system. Receiving this digit allows the voice mail system to
distinguish between a busy and a DND condition and offer the caller
the appropriate choices.
Incoming Intercom Answer
- The DXP sends this DTMF digit to the
voice mail system when a station user makes an intercom call to the
voice mail system. This action...

15.7
Modem SetupThe system supports the operation of the DXMDM serial data modem.
The DXMDM is a general-purpose, Hayes*-compatible, 300, 1200,
and 2400 automatic baud detect, serial data modem that receives its
operating power and configuration programming from the DXP
system. After you install and connect the DXMDM, you must
program the modem port number into the system memory. Since the
serial data port default for both the modem and the SMDR serial data
printer is main port 2, it is a good practice...

Chapter Fifteen1.
ReviewAnalog telephones only provide one line of caller ID
inforrnation; true or false?
Questions.
2.Does caller ID information transfer from station to station?
3.Caller ID baud rate is usually 1200 baud; true or false?
4.List the four Tracker pager designations.
5.The maximum number of DVA units is 16; true or false?
6.For the DVA to function, you must have
lines assigned
and programmed.
7.The total DVA message storage time is four minutes; true or
false?
8.If you are using multiple...

DXP Correspondence ManwalDXP Peripherals
10.The PC Attendant requires two line ports for operation; these
line ports can still be used, however, for outgoing and
incoming calls; true or false?
.
11.You must use a DXIST for digital station ports to use voice
mail; true or false?
12.What purpose does immediate transfer serve when being used
with voice mail?
13. The DXP defaults with integration digits to match Comdial
voice mail: you cannot change these values; true or false?
14. The DXP modem, DXMDM, has...

Review Answers
Chapter One:
Review Answers1. The term modular design means that the system’s electronic
components are housed in a series of self-contained printed
wire boards that can be arranged quickly and easily into a
variety of configurations.
2. 120, 16
3. 32, 192
4.The number and type of line and station boards that you
install.
5. False (it holds a maximum of 12 boards)
6. True. There is a DXP proprietary modem, but any Hayes
compatible modem will work.
7.The exact amount of time depends upon...

Review AnswersDXP Correspondence Manual14.
15.Master timing
16.
17.Onto the RAM card; the software card is part of the CPU
assembly..
The main difference is that the standard RAM card provides
approximately 200 
SMDRs; the expanded RAM provides
12,200 and allows for 
onboard software upgrade.
Digital
Analog
Industry Standard.
18.
19.
20.False; steady on and steady off indicate a malfunction.
25-pair 
amphenol connector.
Loop start
Multipurpose
TlDID.
21.
22.
23.Secondary.
24.
25.Each line board has a...

DXP Correspondence ManualReview AnswersChapter Two:
Review Answers1.As a minimum, think about the clients present and future
needs, the number and type of lines and stations you will need
now, and how much room have you left for future 
exp.ansion.2. Paging device, music source, battery backup, voice mail.
3. Station boards
Analog, Digital, or Industry Standard
Line boards
An Expansion cabinet
4. False. Try to reserve these for auxiliary boards.
5.32-122 degrees fahrenheit with less than 90 percent...

Review AnswersDXP Correspondence ManualChapter Three:
Review AnswersI
.2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.SO- 100 pounds.Six,
24.5.
Keep the distance to a maximum of two inches to connect the
two interface boards; this ensures that you won’t exceed the
ribbon cable length.
False. The expansion cabinet always goes on top of the main
cabinet.
# 10 or# 12 gauge wire
20 feet
117V AC 15 AMP circuit.
False. You should always use a surge protector.
False. Check the output...