Comdial Dsu II Non-LCD Telephone Reference Manual

7.11 Mute Button
By using theMUTEbutton, you can block transmission of your voice
to the distant party. For example, if someone comes into your office to
talk to you and you do not want to interrupt the distant party, just press
theMUTEbutton.
NOTE: Refer to Section 2.5 for SOHVA response using theMUTE
button.
TheMUTEbutton turns on and locks when you press it and turns off
when you press it again.
7.12 Paging
•If you have an external paging unit set up by the installer, you can
send announcements over...

7.13 Personal Ringing Tones
You can choose one of six different ring tones to easily identify your
station when it rings.
•To select one of these rings,
1. PressINTERCOMSS4.
2. Dial1,2,3,4,5or6. One of six ringing tones will be selected and
the next time your telephone rings, you will hear the difference.
7.14 Privacy
By pressing a button designated a “privacy button,” you can allow
another person to join you in a call. Pressing this button a second time
returns your conversation to private status. This...

7.16 Using Toll Restriction Override
You can override one station’s toll restriction assignments with your
own toll restriction assignments by dialing a programmed four-digit
TRO code prior to dialing your desired number. When you dial this
code, the system replaces the current station’s toll restriction
requirements with those that match your home station. After entering a
TRO code at another station, you will get your own prime line or idle
line preference and its accompanying toll restriction...

7.17 Using The Optional Tracker Paging System
The Tracker optional paging system allows you to send messages to
Tracker Pagers assigned to station extension numbers receive messages
that someone else sends you on your Tracker Pager.
The Tracker system will also park calls in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alpha/numeric or numeric-only) is dependent upon the Tracker Pager
model in use at the station.
If your station includes a Tracker Pager,...

•To send a call back message to someone’s Tracker Pager without
first calling them,
1. PressINTERCOM.
2. Dial#01.
3. Dial station extension number.
4. Hang up handset or pressSPEAKERto end. The Tracker paging
system will transmit your station extension number to the caller
party’s Tracker Pager display. (Some models will also display your
station name if the system is programmed to include station
names).
•To park a call and have Tracker paging system tell someone to
retrieve the call,
1. Answer an...

7.18 Voice Announce Blocking
You can prevent voice-signaled intercom calls from sounding through
your station’s speaker.
•To block voice calls,
1. PressINTERCOMS2.
•To un-block voice calls,
1. PressINTERCOM # 2.
This feature also blocks Subdued Off-Hook Voice Announce calls.
Using The Other Telephone Features GCA70–244
7–14 Non-LCDReferenceManual 

7.19 Volume Control
Your telephone has a volume control that allows you to set the volume
(loudness) of the ringer, speaker, handset, and group listening mode.
There are four ringer loudness levels plus ringer off; eight levels for the
speaker and the handset (thirteen levels can be programmed for the
handset on models 8124S, and 8112S); eight levels for the group
listening mode. You may hold the volume rocker switch down and the
loudness will automatically step through each level until you release
the...

7.20 Understanding The DATA Button Light
The optional Data Interface Unit (DIU) provides connections for your
standard multiline digital telephone and an Industry Standard
Telephone (IST) device. The DIU enables you to switch between your
multiline telephone and an IST device (an industry standard telephone,
FAX machine, modem, cordless telephone, or answering machine).
When you have DIU (either local or remote) assigned to your multiline
telephone, your telephone will have a preprogrammed DATA button...

7.21 Using The IMIST Module
Impact SCS8212S-** speakerphones and 8212N-** telephones
equipped with the optional IMIST module can support an IST device
such as a modem, FAX machine, or industry-standard telephone.
Depending on system programming, the IST device may be used to
make outgoing calls and receive incoming calls.
The functionality of the IMIST module is similar to the optional Data
Interface Unit (see Section 7.20).
Functioning only on a DSU II system, the IMIST module does not have
its own...

This page remains blank intentionally.