Comdial Dsu II Non-LCD Station Users Guide

•If you are required to enter an account code when making outside
calls,
1. Select line.
2.
PressINTERCOMand dialS04.
3. Dial your account, hear outside dial tone, and dial outside number.
4. When called party answers, lift handset.
•To use Toll Restriction Override at a station,
1. PressINTERCOM.
2. DialSS6.
3. Dial your station extension number.
4. Dial your TRO code number.
5. Within 15 second timeout period, dial desired outgoing line
number.
6. Hang up handset or pressSPEAKERto end call. You will...

3.2 Using Automatic Call-Back
•To arrange for the system to call back when a busy station
becomes idle or rings with no answer,
1. Make intercom call and hear busy signal or ring-back tone.
2. DialS6.
3. Hang up. (When called station becomes idle or is operated by its
user, your station will ring. Call-back is canceled if you do not lift
your handset when you hear this ringing).
•To answer call-back ring,
1. Lift handset (called station will ring; call-back is canceled if you
do not lift your handset)....

Placing Calls On Hold
4.1 Placing Calls On Hold
•To place a call on hold,
1. PressHOLD.
2. Hang up handset.
•To return to call that is on hold,
1. Lift handset and press line button with flashing green light.
•To place a call on exclusive hold,
1. PressHOLDtwice and hang up handset.
•To place a call on hold at another telephone,
1. While on line, pressINTERCOM(system places call on hold).
2. DialS90, then dial extension number of telephone to receive held
call.
3. Hang up handset.
•To answer a call at...

•To park a call,
1. When on a line, pressINTERCOM.
2. DialS, then dial park orbit access code (91 - 99)
(if chosen orbit is busy, dial alternative orbit number).
3. Hang up handset.
4. Use paging feature to announce call and park orbit access code if
necessary.
NOTE: If call is not retrieved within a programmable time limit, it
reverts to the parking station as a standard held call, and only
one call can be placed in an orbit at a time.
•To retrieve a parked call,
1. Hear announcement.
2. Lift handset....

Transferring Calls
5.1 Transferring Outside Calls
•To announce a call before transferring it,
1. Answer outside call.
2. PressTRANSFER/CONFERENCE(call is placed on hold).
3. Dial station number.
4. Upon answer, announce the call.
5. Hang up the handset (call is transferred).
•To transfer a call without first announcing it,
1. Answer outside call.
2. PressTRANSFER/CONFERENCE(call is placed on hold).
3. Dial station number.
4. Hang up handset. Call will re-ring your telephone if it is not
answered within a...

This page remains blank intentionally. 

Conferencing Calls
6.1 Conferencing Stations Together
•To conference any combination of inside stations and outside lines,
1. Make first call.
2. PressTRANSFER/CONFERENCE.
3. Make next call and pressTRANSFER/CONFERENCEto
establish conference.
4. Repeat the last two steps to add up to two more parties.
NOTE: When setting up a conference call with outside lines and inside
stations, you must call the outside lines first. Use the line
group access codes to place the outside lines in your
conference.
•To drop...

This page remains blank intentionally. 

Using The Other
Telephone Features
7.1 Using the Recall/Flash Feature
•If your system has been configured for flash,
1. PressTA Pto generate a timed flash signal while on line.
•If your system has been configured for recall,
1. PressTA Pto disconnect as if you had hung up.
7.2 Making a Paging Announcement
•To page through an external paging amplifier (if your system
provides this feature),
1. Lift handset.
2. Press paging line select button and dial page access code (see your
attendant for code)—if...

•To answer telephone paging from any station,
1. Lift handset.
2. PressINTERCOM,dial88, and meet paging party on line.
•To enable or disable the Tracker pager at your station,
1. PressINTERCOM.
2. DialS06to enable, or#06to disable.
•To send a call back message to someone’s Tracker Pager after
receiving a ring-no-answer,
1. Make an intercom call to someone and receive no answer.
2. Dial#01.
3. After your station returns to idle (if the Tracker paging system
does not accept your action, you will hear an...