Comdial Digital Telephone System Instructions Manual

Flexible Ringing Assignments
Refer to the discussion titled Ringing.
Flexible Ringing Assignments Of PA Port
Refer to the discussion titled Ringing.
Flexible Station And Line
Class Of Service Control
Refer to the discussion titled Class Of Service.
Flexible Station Numbering Plan
Refer to the discussion titled SquareIVon-Square
Configumrion.
Full Button Programmability Of Features
Refer to the discussion titled Programmable f3uttons.
Handsfree Answer Inhibit
Refer to the discussion titled Mute.
Headset...

Description Of System FeaturesIMl66-107
I Hold And I Use Indications
The light associated with a line button provides a
visual indication of the status of that line. When a
station user has a line in-use or on-hold at a station,
the light indication provided at that station is of a
different color than the indication provided at the other
stations in the system. No class of service
programming is required.
Idle Line Preference
Refer to the discussion titled Line Feature&
Industry-Standard Telephone...

IMl66-107Description Cf System Features
Intercom Features - continued
Tone Or Voice Signalling
The system allows intercom calls to be tone signalled
or voice signalled as the users desire; however, the
programmer uses system class of service
programming procedures to determine which
signalling method the system will employed as the
primary method. Regardless of the programmer’s
arrangement, telephone users can take action to use
the alternate method when they need it. See the
previous paragraph titled...

IM166-107DesCtiDtiOn Of Svstem Features
LCD Support - continuedButton Query
Beginning with software release 14A, station users
who have LCD speakerphones can use their
interactive buttons to access the button query feature.
With this feature, the station user can cause his or her
LCD speakerphone to show the function of each of its
buttons on its display.
2-15A(TAB1 17~23) 

Description Of System FeaturesIMl66-107Line Features
Access Denied, Line Access Restriction
The system programmer can deny access to particular
lines at certain stations in the system. A station user
cannot select a denied line for use. This feature is
programmable on a per line/per station basis in station
class of service programming.
Line Answer From Any Station (Night Mode)
When the attendant programs the system for nighttime
operation using the night transfer of ringing feature,
the line answer from...

IMl66-107Description Of System Features
Manual Hold
Refer to the discussion titled Ho/d.
Meet-Me Answer Page
Refer to the discussion titled Paging.
Messaging
Assist Button
This feature allows a station user to program a button
to be used for sending a message to an LCD
speakerphone. Once programmed, the station user
can press the ASSIST button at anytime to sound a
tone burst at the called station and present a
preprogrammed message in the station display. The
user can send a message while on a call...

IMl66-107Description Of System FeaturesMessaging 
- continued
Message Waiting Originate Default
With software release 14A, the default condition for
the message wait originate feature changes from
disabled to enabled.
2-17A(TAB1 17~33) 

Description Of System FeaturesIMl66-107
Multiline Proprietary Telephone Support
With software release 13B on software cartridges with
a product code designation of Innnn, the digital
telephone system provides support for the 
impact
multiline proprietary telephone with a product code of
6112N. This telephone provides the system users
with economical multiline operation without the added
complexity of monitor or speakerphone requirements.
The system automatically recognizes the multiline
proprietary...

Paging - continued
Meet-Me Answer Page
Any station user can dial a special code number in
response to an all-call or zone page and be connected
to the paging party in a private conversation. Ail-call
or zone paging is provided to the stations through the
station class of service programming.
Zone Paging
Zone paging allows groups of stations to receive
announcements through the station speakers. The
programming can enable zone paging in up to four
different zones. Zone paging can also be received at
the...

Descriotion Of Svstem FeaturesIMl66-107
Pulse/Tone Switchable
The programmer can program the system on a per line
basis using the line class of service programming to
allow the stations to switch from pulse to DTMF type
dialing as needed. Alternately, she or he can program
the system to only allow tone dialing.
Redialing
Automatic Redial (Of Busy
Number Or Unanswered Call)
A user can automatically redial a busy number or
unanswered call by activating this feature. Once the
user activates automatic...