Home > Comdial > Communications System > Comdial Digital Telephone System Instructions Manual

Comdial Digital Telephone System Instructions Manual

Here you can view all the pages of manual Comdial Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 21

IM166-107
Description of System Features
Automatic Redial (Of Busy
Number Or Unanswered Call)
Refer to the discussion titled Redialing.
Automatic Station Relocation
With this feature, the system will automatically
recognize a particular station should that station be
relocated to a new station port. When someone
places a telephone at a new port location, it will
continue to provide the same class of service
parameters and respond to the same extension
numbers as it did at the original station port. A...

Page 22

Description Of System FeaturesIMl66-107Call Costing And Station Message Detail
Accounting Reports
The system provides built-in, estimated costing of all
outside calls. It also provides station message detail
accounting (SMDA) printout reports of all costed calls
as well as displaying call costs on LCD
speakerphones.
Call costing, in general, provides a means of
establishing costs to be applied to outside calls made
from system telephones. Call costing computes
charges for a call after it is completed.It...

Page 23

IM166-107
Description Of System Features
Call Forwarding
Call Forwarding Dn All Calls
This feature allows a station user to designate another
station or the attendant station as the recipient of all
calls normally directed to ring at his or her station.If
the user has call forwarding enabled when the
attendant activates night transfer of ringing, the
system 
fowards the night ringing assignment of the
users station. Calls that the system forwards to a
recipient station can be forwarded again by that...

Page 24

Description Cf System FeaturesIMl66-107
Caller Identification (ID) Service Support
The central office sends caller ID data along lines that
it has assigned to the Caller ID service. Caller ID
information is displayed at a system LCD
speakerphone only if the programmer assigns it to the
Caller ID service, and then only for those Caller ID
lines that are assigned to that station and arranged to
perform as follows:l ring audibly
l
can be answered by user pressing button for the
ringing line
are transferred...

Page 25

Class Of Service
Block Programming
A programmer can assign a particular line or station’s
class of service to an entire block of lines or stations
with one programming action. This feature eliminates
the need for him or her to individually program stations
and lines with the same class of service. A
programmer can perform a block programming class
of service after he or she has programmed a station
class of service or line class of service for a particular
station or line.
Class Of Service Programming...

Page 26

Description Of System FeatureslM166-107
Conferencing
Add-On Conferencing
With this feature, a user at a station that is operating in
a private mode can add up to four other stations to an
outside call.
Multiline Conferencing
This feature will allow one station to access up to four
outside lines at the same time resulting in a
conference arrangement. The user employs the
transfer/conference button to effect the conference.
Unsupervised Conferencing
After a user has established a conference between an...

Page 27

Console Support - continued
In addition to the DSS support that the consoles
provide to the telephone, the first 
DD32X console
provides COS programming buttons Cl0 through C41
and the second console provides COS programming
buttons C42 through C57 when they are needed. You
will not need the second 
IB64X or XD64X consoles for
programming purposes since the first one provides
complete program button coverage.
Data Security
This data security feature will prevent any type of tone
(DTMF, camp-on, barge-in,...

Page 28

Description Of System FeatureslMl66-107
Direct Department Calling With Departmental Call
Distribution (DCD) - continued
When the recall timeout period has ended, the call will
return to the transferring station.
Intercom calls that are made to the department will
test the department stations for busy or a RNA.If all
stations are busy, a busy tone is returned to the caller.
Intercom calls will not camp-on at the department but
will go to the overflow station. Further, the system
camp-on feature cannot be...

Page 29

IMl66-107Description Of System Features
Direct Department Calling With Departmental Call
Distribution (DCD) - continued
Missed Calls: 
The total number of calls that are not
answered at a station and that are cycled by the
system to another station for answering.
Other Calls: This is a summation of the time spent
on outgoing call activity, incoming call activity on
non-department lines, plus all intercom call activity.
On-Duty Time: The on-duty time includes a
summation of idle time, department call...

Page 30

Direct Station Call Hold (Station Park)
This feature allows a station user to park a call at a
specific station where it will be held without ringing. A
feature code plus a station extension number can be
dialed over the intercom line to park the call or a
programmable button can be programmed to provide a
“directed hold” to a specific station. The parked call is
picked up by directed station by dialing a feature code.
It can be picked up at any station through the use of
the call pickup feature. No...
Start reading Comdial Digital Telephone System Instructions Manual

Related Manuals for Comdial Digital Telephone System Instructions Manual

All Comdial manuals