Home > Comdial > Communications System > Comdial Digital Telephone System Instructions Manual

Comdial Digital Telephone System Instructions Manual

Here you can view all the pages of manual Comdial Digital Telephone System Instructions Manual. The Comdial manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 11

System Overview
8024s
J
8012s
8112N81248IB64X
8112s
I
8101N
Figure l-2b. Station Images - Impact Telephones1-7 

Page 12

System OverviewIMl66-1 a7
I,
7016s
XDA16
XD64X
Figure 1-2~. Station Images - Americom Telephones1-8 

Page 13

IM166-107System Overview
t
8.625
L4
X658-
7114x
7114s
7700s
Figure Ma.Outline Dimensions - DigiTech Telephones
4.983
4.069
4,007
2.887
w. 

Page 14

System OverviewIMl66-107l-10 

Page 15

IMl66-107System Overview
\
/9
7010s
7110x
II9
c10.55b
7016s
Figure 1-3~. Outline Dimensions - Americom Telephones
1.41 

Page 16

System OverviewIMi66-107General Specifications
SYSTEM CAPAClTYGo408GO816G1632GM408
LINES
STATIONS
DSS/BLF CONSOLES
INTERCOM PATHS
MAXIMUM SIMULTANEOUS
INTERCOM CONVERSATIONS
PAGING PORTS
PARK ORBITS
SPEED DIALS
SYSTEM
STATION
AUTODIALS
POWER FAIL CIRCUITSPOWER REQUIREMENTS (Fully loaded system)
VOLTAGE
CURRENT
POWER:
VOLT/AMPS4
8164
816
328
Two per sta.Two per sta.Two per sta.Two per sta.
Non-blockingNon-blockingNon-blocking
Non-blocking
Non-blockingNon-blockingNon-blockingNon-blocking
11
1notapp.
9
9...

Page 17

lMl66-.107System Overview
TERMINATIONS
STATION
LINE
STATION MESSAGE DETAIL RECORDING PORT
FORMAT
PARITY
DATA 
BlTS
STOP BITS
BAUD RATE
HANDSHAKING
CABLE LENGTH
MUSIC IiJTERFACE
INPUT LEVEL
INPUT IMPEDANCE
CONNECTOR
PA PORT
OUTPUT LEVEL
OUTPUT IMPEDANCE
CONNECTOR
CENTRAL OFFlCE LlMlTS
LOOP LIMITS
CABLE INSULATION LEAKAGE
INDUSTRY/REGULATORY STANDARDS
MEMORY RETENTION 
AFIER POWER LOSS
FCC REGISTRATION NUMBER
KEY SYSTEM
HYBRID SYSTEM
RINGER EQUIVALANCE NUMBER
PRODUCT CODES
69408 - 4-Line , &Station
GO81 6...

Page 18

IMl66-107
Description Of System Features
Chater 2
Description Of!iystem Features
Abandoned Hold Release
Refer to the discussion titled Ho/d.
Access Denied
Refer to the discussion titled Line Features.
Account Codes
(With Forced Positive Verification)
System users can employ account codes to identify
calls by category or by any other desired grouping so
that the system can print reports. The account code
entry can be voluntary or, beginning with software
release 
13A, the programmer can arrange the...

Page 19

Account Codes - continued
Account Code Button
A programmer can use station class of service
programming to assign an account code button to any
programmable button location at a station as part of
the button mapping procedure. With this account code
button available, the user can press it and then dial an
account code without interrupting the call. Only the
user of the Account Code button will hear the DTMF
tones when he or she dials the code. The distant
on-line party will not hear the DTMF tones, and...

Page 20

IMl66-107Description Of System FeaturesAccount Codes 
- continued
Quantity Of Emergency Numbers For Forced
Account Codes
With software release 14A, the quantity of emergency
numbers that the forced account code feature
provides increases from three to 10. There is no
change in programming required to achieve this from
the method currently discussed in the programming
chapter of your system manual.
2-2A(TAB1 17~35) 
Start reading Comdial Digital Telephone System Instructions Manual

Related Manuals for Comdial Digital Telephone System Instructions Manual

All Comdial manuals