Cisco Prime Nerk 43 User Guide

  
27-47
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 7In the RNCs section, choose RNC ID > Overload Control Procedure Actions. The Overload Control 
Procedure Actions window is displayed. 
Table 27-29 describes the Overload Control Procedure Actions. Pooling for Iu-flex Enabled or Disabled.
The Iu-flex, when enabled, creates a pool area. The pool area contains 
multiple MSCs or SGSN service areas. In the pool area, an UE roams...

  
27-48
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 8In the RNCs section, choose RNC ID > RANAP Characteristics. The RANAP Characteristics 
window is displayed.
Table 27-29 describes the RANAP Characteristics.
Table 27-30 RANAP Characteristics
Field Description
Allocation Or Retention 
PriorityThe priority of allocation and retention of the service data flow. The ARP 
contains information about the priority level, the pre-emption...

  
27-49
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 9In the RNCs section, choose RNC ID > RANAP Global CoreNetwork. The RANAP Global Core 
Network window is displayed.
Table 27-31 describes the RANAP global core network. Extended MBR  Yes or No.
If the RAB ASSIGNMENT REQUEST message contains a request of a RAB 
configuration with Extended Maximum Bit Rate IE and/or Extended 
Guaranteed Bit Rate IE respectively, if supported Maximum...

  
27-50
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 10In the RNCs section, choose RNC ID > RANAP Paging Cause IE. The RANAP Paging Cause IE 
window is displayed.
Table 27-32 describes the RANAP Paging Cause IE.
Step 11In the RNCs section, choose RNC ID > RNC 3GPP. The RNC 3GPP window is displayed.
Table 27-33 describes the RNC 3GPP.
Table 27-32 RANAP Paging Cause IE Properties
Field Description
GMM-Signalling Sets paging cause due...

  
27-51
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Viewing IU PS Associations
To view the associated Iu PS services for a SGSN:
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Mobile > SGSN>SGSN 
service. The SGSN details are displayed in the content pane.
Step 3In the content pane, click the Iu PS Associations tab.
Table 27-34...

  
27-52
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
IU PS Associations Commands
The following IU PS associations commands can be launched from the logical inventory by 
right-clicking a SGSN service and choosing Commands > Configuration. Your permissions determine 
whether you can run these commands (see Permissions Required to Perform Tasks Using the 
Prime Network Clients). To find out if a device supports these commands, see the...

  
27-53
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Figure 27-4 Home Node B Gateway Topology
Viewing the Home Node B Gateway Configuration
To view the Home Node B Gateway Configuration details:
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory>local>Mobile>HNB GW. The HNB 
GW global configuration details are displayed in the content pane. 

  
27-54
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Table 27-36 describes the HNB GW Global Configuration details.
Table 27-36 HNB GW Global Configuration Details
Field Description
NNSF Timer The NAS (Non-Access Stratum) Node Selection Function (NNSF) timer of 
the HNB GW, which can be any one of the following values:
any value between 10 and 60
Disabled
NoteThe NNSF timer is used to store the IMSI and the relevant 
Global-CN-ID....

  
27-55
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 3In the Logical Inventory window, choose Logical Inventory>context>Mobile>HNB GW. In the 
HNB GW node, choose the HNB GW service. The service details are displayed in the content pane.
Table 27-37 describes the HNB GW Service details. Max  Re-Tx  Path The maximum number of times the HNB GW is allowed to access an address 
after the T3-rtx timer expires. This can be any value...

  
27-56
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
IPNE Service The IP Network Enabler (IPNE) service, which defaults to Not Defined.
NoteAn IPNE service is used to enable or disable IP based network 
transfer.
RTP Mux Port The port number that is allocated to the Real Time Transport Multiplexing 
protocol.
RTP Mux  Indicates whether Real Time Transport Multiplexing is enabled for the 
service.
RTP Pool The IP pool configured to...