Cisco Prime Nerk 43 User Guide

  
27-17
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 3Expand the APN node. The following list of characteristics configured for the APN are displayed:
Charging Characteristics—Charging characteristics configured on the APN for different 
subscribers.
DHCP—Dynamic Host Control Protocol (DHCP) parameter configured, if the APN supports 
dynamic address assignment for PDP contexts.
GSM-QoS—Represents the negotiated QoS attribute...

  
27-18
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Table 27-11 APN Characteristics
Field Description
Charging Characteristics
Home Bit Behavior The behavior bit for charging a home subscriber.
Home Profile The profile index for a home subscriber.
Roaming Bit Behavior The behavior bit for charging a roaming subscriber.
Roaming Profile The profile index for a roaming subscriber.
Visiting Bit Behavior The behavior bit for charging a...

  
27-19
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
IPv6
Inbound Access Group 
NameThe name of the IPv6 access group for the APN when configured for inbound 
traffic.
Outbound Access 
Group NameThe name of the IPv6 access group for the APN when configured for 
outbound traffic.
Router Advertisement 
IntervalThe time interval (in milliseconds) the initial IPv6 router advertisement is 
sent to the mobile node. Value is an integer in the...

  
27-20
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
PDP Contexts Parameters
Total Contexts The total number of primary and secondary PDP contexts that can be 
supported by the APN. Value is an integer between 1 and 4,000,000.
PDP Type The type of the PDP contexts supported by the APN.
Primary Contexts The status of the primary contexts of the APN.
PPP Profile
Data Compression 
ProtocolsThe compression protocol used by the APN for...

  
27-21
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
APN Commands
The following commands can be launched from the inventory by right-clicking an APN and choosing 
Commands > Configuration. You can preview a command before executing it, or schedule it to run at 
a later time. You may be prompted to enter your device access credentials while executing a command. 
Your permissions determine whether you can run these commands (see...

  
27-22
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Working with GPRS Tunneling Protocol Prime (GTPP)
GPRS Tunneling Protocol Prime (GTPP) is used for communicating accounting messages to CGs. 
Enhanced Charging Service (ECS) supports different accounting and charging interfaces for prepaid and 
postpaid charging and record generation. GTPP accounting in ECS allows the collection of counters for 
different types of data traffic...

  
27-23
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Viewing Additional Characteristics of a GTPP
To view additional characteristics of a GTPP:
Step 1Right-click the required device in the Vision client and choose Inventory. 
Table 27-13 GTPP Properties in Logical Inventory
Field Description
Group Name Name of the GTPP group.
CDR Storage Mode Storage mode for CDRs, which could be Local or Remote.
CDR Timeout Maximum amount of time the...

  
27-24
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Mobile > GTPP Container> 
GTPP.
Step 3Expand the GTPP node. The following list of characteristics configured for the GGSN are displayed:
Accounting Server Failure Detection—Attributes of the CGF accounting server within the GTPP 
server group.
CDR Attributes Indicator—Indicates whether associated attributes are...

  
27-25
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Indicators Indicates whether the following CDR attributes are enabled or not:
PDP Type
PDP Address
Dynamic Flag
Diagnostics 
Node ID
Charging Characteristic Selection Mode
Local Record Sequence Number
MSISDN
PLMN ID
PGW PLMN ID
IMEI
RAT
User Location Information
List of Service Data
Served MNAI
Start Time
Stop Time
PDN Connection ID
Served PDP PDN Address Extension
Duration
SGW IPv6...

  
27-26
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
IndicatorsLow Access Priority Indicator
Direct Tunnel Present
Furnish Charging Information Present
APN Selection Mode Present
PCO NAI Present
MS Timezone Present
CDR Triggers
Triggers Indicates whether the following CDR triggers are enabled or not:
Volume Limit
Time Limit
Tariff Time Change
Serving Node Change Limit
Intra SGSN Group Change
Inter PLMN SGSN Change
EGCDR Max LOSDV Limit...