Cisco Prime Nerk 43 User Guide

  
27-27
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Include All LOSDVs Indicates whether all content IDs are included in the final eG-CDR or not.
LOSDV Max 
ContainersMaximum number of List of Service Data Volume (LoSDV) containers in 
one eG-CDR.
LOTDV Max 
ContainersMaximum number of List of Service Data Volume (LoSDV) containers in 
one eG-CDR.
Closing Cause Unique Indicates whether the same closing cause needs to be included for...

  
27-28
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
GTPP Commands
The following GTPP-related commands can be launched from the inventory by right-clicking a GTPP 
and choosing Commands > Configuration or Commands > Show. Your permissions determine 
whether you can run these commands (see Permissions Required to Perform Tasks Using the 
Prime Network Clients). To find out if a device supports these commands, see the Cisco Prime Network...

  
27-29
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Working with the Evolved GPS Tunneling Protocol (eGTP)
Evolved GPRS Tunneling Protocol (EGTP) formulates the primary bearer plane protocol within an 
LTE/EPC architecture. It provides support for tunnel management including handover procedures within 
and across LTE networks.
This topic contains the following sections:
Viewing eGTP Properties, page 27-29
eGTP Commands, page 27-31...

  
27-30
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Table 27-16 EGTP Properties in Logical Inventory
Field Description
Service Name Name of the EGTP service.
Status Status of the EGTP service.
Message Validation 
ModeMode of message validation for the EGTP service.
Interface Type Interface type for the EGTP service.
DBcmd When MBreq 
PendingIndicates collision handling of DBcmd when MBreq is pending. When No is 
specified as a Default...

  
27-31
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
eGTP Commands
The following eGTP commands can be launched from the inventory by right-clicking an EGTP and 
choosing Commands > Configuration. Your permissions determine whether you can run these 
commands (see Permissions Required to Perform Tasks Using the Prime Network Clients). To find out 
if a device supports these commands, see the Cisco Prime Network 4.3.2 Supported Cisco VNEs....

  
27-32
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 3Under the SGSN node, choose an SGSN service. The SGSN service details are displayed in the content 
pane.
Table 27-18 describes the SGSN service details. 

  
27-33
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Table 27-18 SGSN Service Details
Field Description
Service Name The unique name of the SGSN service. 
NoteYou can configure only one SGSN service for a chassis.
Status The status of the SGSN service, which can be any of the following:
Unknown
Initiated
Running
Down
Started
Not Started
SGSN Number The phone number that is associated with the SGSN service.
Core Network ID The network...

  
27-34
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Associated Gs Service The name of Gs service and its context that is associated to the SGSN 
service. This service is represented in the following format:
@
Associated CAMEL 
ServiceThe name of the Customized Application for Mobile Network Enhanced 
Logic (CAMEL) service and its context. This service is represented in the 
following format:
@
Max Simultaneous PDP 
ContextsThe maximum...

  
27-35
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Gf Timeout Action The action to be taken by the SGSN service when a response is not received 
from the Equipment Identify Register (EIR) even though a valid EIR 
configuration exists under the MAP service and the route to the EIR is 
available. Any one of the following actions is applicable:
Continue
Reject
Gf Failure Action The action to be taken by the SGSN service when the EIR is...

  
27-36
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
SGSN Commands
The following SGSN commands can be launched from the logical inventory by right-clicking a SGSN 
service and choosing Context > Commands > Configuration. Your permissions determine whether you 
can run these commands (see Permissions Required to Perform Tasks Using the Prime Network Clients). 
To find out if a device supports these commands, see the Cisco Prime Network...