Cisco Prime Nerk 43 User Guide

  
27-77
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Viewing the IKE SA Configuration Details
To view the IKE SA configuration details:
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Security Association > IKE 
IPSec SA. The Vision client displays a list of IKE Security Associations in the content pane. 
Step 3Right-click a IKE SA...

  
27-78
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Role The role of the entity that is establishing the security association, which can 
be any one of the following:
Initiator–The entity that initiated the security association.
Responder–The entity that is responding to the security association.
IPSec Manager The IPSec manager of the IKE Security Association, which is created and 
associated to a tunnel.
Send Rekey Requests Indicates...

  
27-79
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Viewing the Child IPSec SA Configuration Details
To view the Child IPSec SA Configuration Details:
Step 1Right-click the required device in the Vision client and choose Inventory.
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Security Association > 
Child IPSec SAs. The Vision client displays a list of IPSec Security Associations in the content pane. 
Step...

  
27-80
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Table 27-54 Child IPSec SA Configuration Details
Field Description
IP Address The IP address of the local wireless security gateway service that is 
facilitating the security association.
Remote Peer Address The IP address of the remote WSG service that is facilitating the security 
association.
Outbound SPI The Security Parameter Index (SPI) of the outbound security association....

  
27-81
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Viewing the CA Certificate Configuration Details
To view the CA certificate configuration details:
Step 1Right-click the required device in the Vision client and choose Inventory. Protocol The transport protocol used at the inbound/outbound side, which can be any 
one of the following:
ESP – Encapsulating Security Payload
AH – Authentication Header
PCP – Payload Compression Payload...

  
27-82
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Step 2In the Logical Inventory window, choose Logical Inventory > Context> Security Association > CA 
Certificates. The Vision client displays a list of CA Certificates in the content pane. 
Step 3Right-click the CA Certificate and choose Properties. The CA Certificate Properties window is 
displayed.
Table 27-55 describes the CA certificate configuration details.
Configuring Wireless...

  
27-83
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Show Sec GWcontext>Sec GW>right-click a Sec GW 
service >Commands > ShowUse this command to view 
details of the selected security 
gateway service.
Create Sec GW LookupRight-click the 
device >Commands > ConfigurationUse this command to create a 
new security gateway Lookup.
Modify Sec GW Lookupcontext> SEC GW >In the Sec GW 
Lookup tab in the content pane, 
right-click the Priority...

  
27-84
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  GPRS/UMTS Networks
Show CA Certificatecontext> IP Security > CA 
Certificate> right-click a certificate 
>Commands>ShowUse this command to view the 
CA certificate details.
Show IKE SAscontext>IP Security>right-click IKE 
IPsec SA >  Commands>ShowUse this command to view 
details of the selected IKE SA.
Create IKEv2 
Tr a n s f o r m  S e tRight-click the 
context>Commands>ConfigurationUse this command...

  
27-85
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
LTE Networks
These topics describe how to use Prime Network to monitor LTE networks and technologies:
Overview of LTE Networks, page 27-85
Working with LTE Network Technologies, page 27-86
Overview of LTE Networks
Long Term Evolution (LTE) is the latest step in moving forward from the cellular 3G services, such as 
GSM to UMTS to HSPA to LTE or CDMA to LTE. LTE is based on standards...

  
27-86
Cisco Prime Network 4.3.2 User Guide
EDCS-1524415
Chapter 27      Managing Mobile Networks
  LTE Networks
Figure 27-5 Basic LTE Network Topology
Working with LTE Network Technologies
The E-UTRAN uses a simplified single node architecture consisting of the eNodeBs (E-UTRAN 
Node B). The eNB communicates with the Evolved Packet Core (EPC) using the S1 interface, 
specifically with the Mobility Management Entity (MME) and Serving Gateway (S-GW) using S1-U 
interface. The PDN Gateway (P-GW0 provides...