Cisco 3560 Poe8 Manual

 
D-3
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix D      Configuring the Switch with the CLI-Based Setup Program
Completing the Setup Program
When the switch powers on, it automatically begins the power-on self test (POST), a series of tests that 
verifies that the switch functions properly. When the switch begins POST, the system LED slowly blinks 
green. When POST completes, the system LED blinks amber. If POST fails, the system LED remains 
amber. If POST completes...

 
D-4
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix D      Configuring the Switch with the CLI-Based Setup Program
Completing the Setup Program
Step 4Enter an enable password, and press Return.
Enter enable password: enable_password
Step 5Enter a virtual terminal (Telnet) password, and press Return.
The password can be from 1 to 25 alphanumeric characters, is case sensitive, allows spaces, but ignores 
leading spaces.
Enter virtual terminal password: terminal-password
Step...

 
D-5
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix D      Configuring the Switch with the CLI-Based Setup Program
Completing the Setup Program
!
end
Step 10These choices appear:
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
If you want to save the configuration and use it the next time the switch reboots, save it 
in NVRAM by selecting option 2.
Enter your...

 
D-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
Appendix D      Configuring the Switch with the CLI-Based Setup Program
Completing the Setup Program 

 
IN-1
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
INDEX
Numerics
10/100/1000 ports
auto-MDIX feature
     1-9
cable lengths     2-5, 3-6
connectors and cables     B-1
described     1-8
dual-purpose ports     1-10
illustrated     1-7
pinouts     B-2
PoE     1-9
10/100 ports
auto-MDIX feature
     1-9
cable lengths     2-5, 3-6
connecting to     2-19
connectors and cables     B-1
described     1-8
illustrated     1-3
PoE     1-9
1000BASE-T SFP module
ports cable lengths
     2-5, 3-6
5...

 
Index
IN-2
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
torquing recommendation     C-6
Cisco IOS command-line interface     1-21
Cisco IP Phones, connecting to     1-9, 2-20
Cisco Network Assistant     1-20
Cisco RPS
See RPS
CiscoView
     1-21
CLI
to manage switch
     1-21
to set up switch     D-1
code compliance warning     2-4, 3-4
command-line interface
See CLI
configuration examples, network
     1-1
connecting
to 10/100/1000 ports
     2-19
to 10/100 ports     2-19
to console...

 
Index
IN-3
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
description     1-3 to 1-14
dual-purpose ports     1-10
LEDs     1-11 to 1-14
SFP module ports     1-10
G
ground connection warning     C-2
grounding procedure caution     C-2
grounding procedure for DC power     C-2 to C-4
H
HP OpenView     1-21
humidity, relative     A-1
I
installation
assigning the IP address
     D-3
connecting to a power source     D-2
mounting
on a desk with mounting screws (8- and 12-port 
switches)
     3-9...

 
Index
IN-4
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
mounting brackets
attaching (24- and 48-port switches)
     2-8 to 2-10
rack-mount (24- and 48-port switches)     2-10
rack-mount (8- and 12-port switches)     3-17
mounting desk- or shelf-mounting
24- and 48-port switches
     2-15
N
NEBS standard for electromagnetic safety     2-5, 3-5
Network Assistant
using to configure switch
     2-24, 3-20
network configuration examples     1-1
Network Equipment Building Systems
See NEBS...

 
Index
IN-5
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
24- and 48-port switches     2-7, 2-11
8- and 12-port switches     3-16, 3-17
rear panel
clearance
     2-5, 3-5
description     1-15 to 1-19
removing SFP modules     2-17 to 2-18
restricted access area warning     C-1
RJ-45 connector, console port     B-3
RPS
connecting to
     2-6, 3-7
connector     1-19
LED     1-12
S
safety warnings (24- and 48-port switches)     2-2, 3-2
security slot     1-20
serial number location     4-6...

 
Index
IN-6
Catalyst 3560 Switch Hardware Installation Guide
OL-6337-07
PoE shock hazard     2-4, 3-4
removing power from DC circuit     C-5
restricted access area     C-1
servicing equipment     C-5