Christie Projector Roadster, Matrix WU, Mirage S+/HD/WU User Manual

							 Specifications 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 6-7 020-100002-05 Rev. 1 (02-2010) 
Lamp (DC)  
Type
 Bubble Xenon lamp 
Power 
 
Roadster HD12K 
Roadster S+ 12K 
Matrix WU12 
Mirage HD12 
Mirage WU12 
Roadster S+ 16K 
Mirage S+14K 
Mirage HD18 
Mirage WU18 
Roadster HD18K 
Roadster S+ 20K  
 
2.0 kW 
2.0 kW 
2.0 kW 
2.0 kW 
2.0 kW 
2.4 kW 
2.4 kW 
3.0 kW 
3.0 kW 
3.0 kW 
3.0 kW 
 
Adjustment ranges 
 
Roadster HD12K 
Roadster S+ 12K 
Matrix WU12 
Mirage HD12 
Mirage WU12 
Roadster S+ 16K 
Mirage S+14K 
Mirage HD18 
Mirage WU18 
Roadster HD18K 
Roadster S+ 20K   
 
 
1200 – 1900 W 
1200 – 1900 W 
1200 – 1900 W 
1200 – 1900 W 
1200 – 1900 W 
1500 – 2400 W 
1500 – 2400 W 
2000 – 3000 W 
2000 – 3000 W 
2000 – 3000 W 
2000 – 3000 W 
  
 
Lamp Life (warranty hrs.)  
 
Roadster HD12K 
Roadster S+ 12K 
Matrix WU12 
Mirage HD12 
Mirage WU12 
Roadster S+ 16K 
Mirage S+14K 
Mirage HD18 
Mirage WU18 
Roadster HD18K 
Roadster S+ 20K  
 
 
1000 hours 
1000 hours 
1000 hours 
1000 hours 
1000 hours 
750 hours 
750 hours 
750 hours 
750 hours 
750 hours 
750 hours 
 
 
Warm-up time to full brightness  
10 minutes max. 
(20 min for 3kW models) 
 
Operating position  
Any vertical angle. See Operating 
Environment - Tilt, below. 
 
 
  
						

							Specifications  
6-8 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010)   
       58 dBA max. sound power (average at 1 meter, all four sides) 
 
UL 60950-01 1
st edition and CAN/CSA C22.2. No. 60950-01-03 1st edition 
IEC 60950-1: 2001 
        IEC 60825 for laser in IR remote controller 
 
        FCC CFR47, Part 15, Subpart B, Class A — Unintentional Radiation 
        CISPR 22/ EN55022— Radio disturbance characteristics for ITE 
 
        CISPR 24 / EN55024 (all parts of immunity characteristics for ITE) 
 
Temperature  5°C to 35°C (41°F to 95°F) 
Humidity (non-condensing)  20% to 80% 
Altitude  0 – 3000 meters 
Tilt, Vertical 
Tilt, Horizontal Unlimited 
15° max. 
 
Temperature  -40C to 70°C (-40F to 149°F) 
Humidity (non-condensing)  0% to 95%  
 
Weight of product (without lens or stackers)  
 Roadster S+ 12K 
               Roadster HD12K 
               Matrix WU12 
               Mirage HD12 
               Mirage WU12 
Roadster S+ 16K 
Mirage S+ 14K 
Mirage HD18 
Mirage WU18 
Roadster HD18K 
Roadster S+ 20K  
140 lb (63.6 kg) 
140 lb (63.6 kg) 
140 lb (63.6 kg) 
140 lb (63.6 kg) 
140 lb (63.6 kg) 
145 lb. (65.9 kg) 
145 lb. (65.9 kg) 
160 lb. (73 kg) 
160 lb. (73 kg) 
160 lb. (73 kg) 
160 lb. (73 kg) 
 
Shipping weight in standard packaging 
Roadster S+ 12K 
Roadster HD12K 
Matrix WU12 
 Mirage HD12K 
Mirage WU12 
Roadster S+ 16K 
Mirage S+ 14K 
Mirage HD18 
Mirage WU18 
Roadster HD18K 
Roadster S+ 20K  
 
205 lb (93 kg) 
205 lb (93 kg) 
205 lb (93 kg) 
205 lb (93 kg) 
205 lb (93 kg) 
210 lb. (95 kg) 
210 lb. (95 kg) 
225 lb. (102 kg) 
225 lb. (102 kg) 
225 lb. (102 kg) 
225 lb. (102 kg) 
   Audible Noise 

 Safety 
 EMC Emissions 
 EMC Immunity 
 Operating Environment 
 Non-Operating 
  Environment 

                  Size & Weight     
						

							 Specifications 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 6-9 020-100002-05 Rev. 1 (02-2010)  
Standard IR Remote (includes two, 1.5V AA batteries) 
Line Cord  
Dual SD/HD-SDI Module 
Stacking mounts 
Integral rigging hardware 
Standard IR Remote (includes two, 1.5V AA batteries) 
Line Cord  
TWIST Module 
TWIST User Manual 
 
Standard IR Remote (includes two, 1.5V AA batteries) 
Line Cord  
3D Stereo Sync Cable 
Using 3D in Mirage User Manual/Mirage CD 
Wired remote keypad Ceiling Mount    
Remote IR sensor Stacking Frame   
Ceiling Mount Extension   
Ethernet, RS-232 and RS-422 communication cables 
“Brick” style rental staging – Standard IR Remote 
KoRE Librarian for downloading new software 
 
0.67:1 fixed  (104-110101-01) 1.38-1.84:1 zoom  (104-112101-01) 
1.1:1 fixed FP  (104-111101-01) 1.84-2.58:1 zoom  (104-113101-01) 
1.1:1 fixed RP  (104-116101-01) 2.58-4.15:1 zoom  (104-114101-01) 
1.16-1.49:1 zoom  (104-137101-01) 4.15-6.74:1 zoom  (104-115101-01) 
  
6.9-10.4:1 zoom  (104-130101-01) 
 
Wired remote keypad  
Service Manual  
KoRE Librarian for downloading new software   
Stacking Hardware for Mirage Models 
Projector Blinders, PN 104-102011 
 
RGB500 Input Module 
RGB400 Active Loop-Through Input Module 
RGB400 Buffered Amplifier Input Module 
PC250 Analog Input Module  
Serial Digital Input Module 
DVI Input Module 
Dual SD/HD-SDI Module (Standard with the Roadster HD Series, optional for 
Mirage and Matrix models).  Standard Components 

Roadster Series 
Standard Components 

Matrix Series 
Standard Components 

Mirage Series 
O
ptional Accessories  
Lenses HD 
 
Accessories  
O
ptional Input Modules   
						

							Appendix A 
Keypad Reference 
 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual A-1 020-100002-05 Rev. 1 (02-2010) 
Note: N/A on WU Models
 
*Toggle keys, which require you to either, press and hold, or press twice or press and use the 
up/down arrow key. 
 
  
						

							Keypad Reference  
A-2 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010) 
the shutter
  Press OSD  to turn OffUse to
 
  
						

							Appendix B 
Serial Communication 
Cables 
 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual B-1 020-100002-05 Rev. 1 (02-2010) 
 
A serial link of RS-232 or RS-422 enables ASCII communication with the projector so that it can be 
controlled remotely from a PC or other controller. From a PC, connect a standard nine-wire RS-232 serial 
cable to the 
RS-232 IN port located on the side of the projection head. Or, for long-distance (>100 ft.) links 
with an RS-422-compatible PC or controller, connect RS-422 cable to the 
RS-422 port.  
  
 
  
						

							Appendix C 
System Integration 
 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual C-1 020-100002-05 Rev. 1 (02-2010) 
The GPIO (General Purpose Input/Output) connector located on the input panel provides a flexible method of 
interfacing a wide range of external I/O devices to the projector. There are seven GIO pins available on the 
nine-pin D-Sub GPIO connector, which are configurable via RS-232 commands. The other two pins are 
reserved for ground and power – see table below for pin identification. 
GPIO Pins 
 
 
 
 
 
 
 
Pin #  Signal 
1  + 12V (200mA) 
2 GPIO 1 
3 GPIO 2 
4 GPIO 3 
5 Ground 
6 GPIO 4 
7 GPIO 5 
8 GPIO 6 
9 GPIO 7 
 
The serial cable required for connecting the external device to the projector’s GPIO 
connector, whether it’s a standard serial cable or a custom one, must be compatible 
with the external device.  
The GPIO connector can be configured to automate any number of events using the 
serial command code GIO. Each pin is defined as either an input or output 
depending on the desired outcome. In general, configure the pin as an input if you 
want the projector to respond to something the device does and as an output if you 
want the external device to respond to an action taken by the projector. For example, 
configure the pin as an output if you want the lighting in a room to automatically dim 
when the projector is turned on. 
By using the GIO command, you can also set the state of each pin as high or low. By 
default, the state of each pin is high. The voltage applied to pins in the high state is + 
3.3V. 
Example 1.
 Turn room lighting on when the projector is turned off. (Assumes a 
control/automation unit is configured to turn the lights on when pin 2 of its input goes 
high.)   Confi
guring the GPIO  
						

							System Integration  
C-2  Roadster, Matrix WU, Mirage S+/HD/WU User Manual                        020-100002-05 Rev. 1 (02-2010) 
(GIO C2 O)   Set pin #2 configuration to output  
(GIO 2 H)  Set pin #2 to high (state) 
(GIO?)  Request the state and configuration of all pins 
(GIO! “HHLLHLH” “OOIOOOI”) Reply of pin state and configuration 
(GIO? C2)  Request configuration for pin #2 
(GIO! C2 O)  Reply with pin #2 configuration as output 
(GIO? 2)  Request the state of pin #2 
(GIO! H)  Reply with pin #2 state as high 
 
Use the serial command RTE to specify an action that is initiated at a particular time 
or based on an external stimulus. 
For General Purpose IO “G” 
Parameter Name   Value 
P1  RTE type  G (Real Time I/O Event) 
P2 I/O bit 1-7 
P3 Pin state 
(1 Character) 
(String) H = High 
L = Low 
“LHXXXHL” Combine multiple inputs and 
trigger occurs when all conditions are met 
P4  Commands  Any valid serial protocol command for the 
device 
 
Example 2.
 Projector powers up when a switch on the external device is turned on. 
(GIO C2 I)  Set pin #2 configuration as input 
(RTE G 2 H “(PWR 1)”)  Power on when pin #2 set to high  
(RTE G 2 L “(PWR 0)”)  Power off when pin #2 set to low 
 
 
   Quer
y Command 
  Real Time Event 