Christie Projector Roadster, Matrix WU, Mirage S+/HD/WU User Manual

 Operation 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 3-37 020-100002-05 Rev. 1 (02-2010) 
UNLOCKLOCK
CLOSEOPEN
 
                
Aperture Manual Adjustment 
RESERVED - No function. 
Mirage S+ Series — Simulation 3D — 
SUBMENU OF ADVANCED IMAGE 
SETTINGS 
Use the options in the Simulation 3D 
menu to make the timing adjustments 
necessary for realistic simulation and 
3D images. 
NOTE: For complete 3D application 
notes, refer to the separate Using 3D 
in Mirage manual provided with the 
Mirage...

Operation  
3-38 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010) 
DARK INTERVAL — Adjust Dark Interval to artificially increase the amount of dark 
time between displayed frames for stereographic 3D images. Higher settings provide 
more time for shutters in 3D glasses to open/close, ensuring that each eye sees the 
full display intended for it. Symptoms of cross talk and/or color artifacts can indicate 
need for adjustment. The Dark Interval range of adjustment depends on...

 Operation 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 3-39 020-100002-05 Rev. 1 (02-2010) 
FRAME LOCK ENABLE — This option allows the projector to control the output frame 
timing based on the input signal. The locked option forces (if possible) the output 
image to be phase locked to the input frames. Rate Matched means that the output 
runs at close to the input frequency but isn’t locked to it so the output will drift in 
phase relative to the output. Free Run forces the output to run at a 60Hz...

Operation  
3-40 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010) 
DARK INTERVAL — Adjust Dark Interval to artificially increase the amount of dark 
time between displayed frames for stereographic 3D images. Higher settings provide 
more time for shutters in 3D glasses to open/close, ensuring that each eye sees the 
full display intended for it. Symptoms of cross talk and/or color artifacts can indicate 
need for adjustment. The Dark Interval range of adjustment depends on...

 Operation 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 3-41 020-100002-05 Rev. 1 (02-2010) 
3D STEREO SYNC DELAY — This value is set when the L/R frames begin and by 
default, is automatically calculated based on signal timing; it defines the best 
reference point for synchronizing the display with your glasses. Proper adjustment of 
this delay should eliminate cross talk and odd colors caused by timing differences 
between the glasses and the projected display. Slide bar values indicate the number...

Operation  
3-42 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010) 
ACCUFRAME – Increasing the AccuFrame value will reduce the artifacts related to 
fast motion in simulation content. Symptoms of blurry objects or loss of apparent 
detail may indicate a need for this value to be adjusted.  
 
NOTE: If increasing AccuFrame does not improve image quality, reduce the value 
to 0. Increasing AccuFrame may increase ‘flicker’ of the display and may reduce 
overall brightness....

 Operation 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 3-43 020-100002-05 Rev. 1 (02-2010) 
3D SOURCE — When using a Mirage projector with HD or WUXGA resolution, a 
checkbox option called 3D Source will be added to the bottom of the Advanced 
Image Settings menu. This checkbox must be set by the user for all new 3D sources, 
and cleared for all new non-3D sources (default setting is checked).  Once set, this 
value will be maintained for that source for all future uses. This option is also...

Operation  
3-44 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010) 
Set Date & Time 
Enter or read the current year-month-day and hour-minute-second. Changes here 
reset the projector’s real-time clock. 
Menu Preferences 
— SUBMENU 
Adjust the appearance, content and/or 
location of on-screen menus and 
messages. 
LARGE MENU FONT — Enter a 
checkmark to enlarge menus and their 
text. You may have to adjust “Menu 
Location” to accommodate the 
increased menu area. 
MENU...

 Operation 
Roadster, Matrix WU, Mirage S+/HD/WU User Manual 3-45 020-100002-05 Rev. 1 (02-2010) 
SPLASH SCREEN SETUP — Use the Splash Screen to choose when you would like to 
display a special introductory splash screen image, such as your company logo, 
graphic or message. 
 Always Off = A splash screen never appears 
 Always On = A splash screen is always on behind the current display image, 
similar to wallpaper. 
 Startup Only – The splash screen logo appears at projector startup only. 
 Startup...

Operation  
3-46 Roadster, Matrix WU, Mirage S+/HD/WU User Manual  020-100002-05 Rev. 1 (02-2010) 
Network Routing 
NOTE: Not applicable for stand-alone projectors or simple serial networks with only 
one type of controller and linking. 
Separate
RS232 and RS422 Joined
Ethernet Joined
All Joined RS232 and  1.
2.
3.
4.
 
SEPARATE: Select “Separate” (factory default) to keep RS-232, RS-422 and Ethernet 
messages on their respective paths instead of being broadcast to the other types of 
ports. In Figure...