Christie Projector Mirage WU-L User Manual
Have a look at the manual Christie Projector Mirage WU-L User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Mirage WU-L User Manual7-1020-100774-01 Rev. 2 (4-2012) 7 Specifications 7.1 Regulatory 7.1.1 Safety Be aware of the caution label on the projector warning of possible eye hazard if the projected visible and invisible LED radiation light is viewed directly through certain optical instruments at close range. The image below indicates where the label is located. The projector is a class 2M source of visible and invisible LED radiation. Directly viewing the LED output with certain optical instruments (for example, eye loupes, magnifiers and microscopes) within a distance of 100 mm (3.94”) may pose an eye hazard. • CSA C22.2 No. 60950-1-03 First Edition • UL 60950-1 1 st Edition • IEC 60950-1:2001 European Norm, Safety of Information Technology Equipment 7.1.2 Environmental Regulations • EU Directive (2002/95/EC) on the restriction of the uses of certain hazardous substances (RoHS) in electrical and electronic equipment and the applicable official amendment(s). • EU Directive (2002/96/EC) on waste and electrical and electronic equipment (WEEE) and the applicable official amendment(s). • Japanese Industrial Standard (JIS C 0950:2005) on marking for the presence of specific chemical substances for electrical and electronic equipment. • China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution caused by electronic information products, hazardous substances concentration limits (SJ/T11363-2006), and the applicable product marking requirement (SJ/T11364-2006).
7-2Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012) Section 7: Specifications 7.1.3 Emissions • FCC Code of Federal Regulations, Title 47, Part 15, Conducted and Radiated Emissions, Class A • EN55022 (CISPR 22) for Information Technology Equipment, Conducted and Radiated, Class A • EN61000-3-2 Induced Harmonic Distortion • EN61000-3-3 Induced Voltage Fluctuations (Flicker) 7.1.4 Electromagnetic Compatibility • FCC CFR47, Part 15, Subpart B, Class A – Unintentional Radiators • CISPR 22: 2005 (Modified) / EN55022:2006, Class A – Information Technology Equipment • CISPR 24: 1997 (Modified) +A1:2001+A2:2002 / EN55024: 1998 +A1:2001 +A2:2003 EMC • Requirements - Information Technology Equipment 7.1.5 Immunity • EN55024, specific to Information Technology Equipment (all parts), under which are: • EN61000-4-2 ESD • EN61000-4-3 Radiated Immunity • EN61000-4-4 Fast Transient/Burst Immunity • EN61000-4-5 Surge Immunity • EN61000-4-6 Immunity to Conducted Disturbances • EN61000-4-8 Magnetic Field Immunity • EN61000-4-11 Voltage Dips, Short Interruptions and Voltage Variations Immunity 7.2 Mirage WU-L Specifications 7.2.1 Display • Resolution WUXGA (1920 x 1200) • Brightness 440 lumens @ EBU ± 10% • Contrast ratio • Full-ON/Full-OFF 1500:1 min. • Native (ANSI) 450:1 ± 10% • Brightness uniformity • 0 lens offset center-to-corner 90% min. • With software adjustment 100% • Colors and gray scale • Resolution 8 bits • Displayable colors 16.8 million
Section 7: Specifications Mirage WU-L User Manual7-3020-100774-01 Rev. 2 (4-2012) • Color temperature • Factory default white color (K) 6500 ± 500 • Image white color (K) 3200 - 9300 • Range of adjustment (K) 3200 - 9600 • Color Temp. variation (K) 500 7.3 Lenses LENS (0.637:1 EFFECTIVE WUXGA) Throw Ratio WU 0.637 nominal Projection range (diagonal) 1016mm x 2550mm (40” x 100”) Lateral color error 0.5 pixels max. Geometry distortion 0.1% max. FIXED 0.75:1 HD/WUXGA Throw Ratio HD/WUXGA 0.75 Projection range (diagonal) 700mm x 2540mm (28” x 102”) Lateral color error 0.5 pixels max. Geometry distortion 0.3% max. ZOOM 1.2-1.6:1 Throw Ratio HD/WUXGA 1.2-1.6 Projection range (diagonal) 1.5 m to 5.4 m (4.92 ft to 17.7 ft) Lateral color error
7-4Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012) Section 7: Specifications 7.3.1 Power Requirements • Voltage range 90 - 240VAC nominal • Line frequency 50 - 60Hz nominal • Maximum inrush current 30A • Power consumption 400W max. • Typical current consumption 4A @ 100V (normal brightness, 1 input) • Maximum current consumption 5.9A @ 100V (max. brightness, multiple inputs & external accessories) NOTES: 1) Use of Manual RGB Adjustment to change projector brightness may increase power consumption beyond typical power consumption. 2) Maximum power consumption includes provision for additional input cards and external accessories at maximum brightness. 7.3.2Light Module 7.3.3 Physical Specifications Maximum Product Dimensions (L x W x H) Product Weight TYPE3XPT120 LED MODULES Operating Position Any MTBF 60,000 hours Projector Head Module Assembly (with LM) 219mm x 467mm x 286mm (8.6” x 18.4” x 11.3”) Electronic Module 426mm x 426mm x 169mm (16.8” x 16.8” x 6.7”) Projector Head Module Assembly and Light Module 15.9 kg (35 lb) Electronic Module 4.4 kg (9.7 lb)
Section 7: Specifications Mirage WU-L User Manual7-5020-100774-01 Rev. 2 (4-2012) 7.3.4 Projector Dimensions and Mounting Information Figure 7-1 Mirage WU-L Front Dimensions Figure 7-2 Mirage WU-L Side Dimensions with 1.2 - 1.6:1 Lens 192 274 276 468287
7-6Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012) Section 7: Specifications Figure 7-3 Electronic Module Dimensions Figure 7-4 Mirage WU-L Side Dimensions with 0.64 Lens
Section 7: Specifications Mirage WU-L User Manual7-7020-100774-01 Rev. 2 (4-2012) Figure 7-5 Mirage WU-L Side Dimensions with 0.75:1 Lens 7.3.5 Environment Operating Environment • Temperature 0°C to +40°C (40°F to 95°F) • Humidity 15% - 90% • Altitude 0-3048 m (10,000 ft) • Vibration 0.5GRMS 10-500Hz, 15 minutes all axes Non-Operating Environment • Temperature -25°C to +70°C (-13°F to 158°F) with relative humidity varying between 0% - 95% • Humidity 0% - 95% (non-condensing) • Altitude 0-9144 m (30,000 ft) • Vibration 0.74GRMS 10-300Hz, 15 minutes all axes
7-8Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012) Section 7: Specifications 7.3.6 Standard and Optional Components Due to continuing research, specifications are subject to change without notice. Specifications apply to all models unless otherwise noted. Standard Components • Line Cord (North American and European rated) • Digital input card x2 • VGA input card Optional Accessories User Kit (P/N: 125-104106-xx) • User Manual - electronic and hard copy (P/N: 020-100774-xx) • Setup Guide - electronic and hard copy (P/N: 020-100782-xx) • All necessary tools for normal servicing •Twist CD •Remote •Cable Input Cards • Digital (DVI) Input Card, VGA Input Card (P/N: 108-312101-xx) • Analog (RGB) Input Card (P/N: 108-309101-xx) • Dual SDI/HDSI Card (P/N: 108-313101-xx) • Twin HDMI Card (P/N:108-311101-xx) Service Manual • Service Manual (P/N:020-100777-xx) Motoblend Mounting Kit • Custom Motoblend Mounting Kit Lenses • Fixed 0.64:1 (HD/WUXGA) - P/N: 125-103105-xx • Fixed 0.75:1 (HD/WUXGA) - P/N: 125-105107-xx • Zoom 1.2-1.6:1 (HD/WUXGA) - P/N: 125-101103-xx
Section 7: Specifications Mirage WU-L User Manual7-9020-100774-01 Rev. 2 (4-2012) 7.4 Inputs NOTES: 1) Value specifies frame rate of non-interlaced sources and field rate for interlaced sources. Frame/ field rates higher than the maximum refresh rate of the panels will be displayed at a lower rate. 2) Does not apply to sync-on-green/luma. 3) As the horizontal frequency increases and/or as the vertical scaling ratio of input lines to output lines increases many sources will run into the internal 180Mpix/s processing which limits the number of pixels that can be processed. ANALOG RGB OR YPRPB(Interlaced or Progressive Scan Format) Pixel Clock Rate 13 – 270 MHz maxNOTE: Pixel rates above 150MHz require DIPC Color Space RGB or YPbPr Input Levels: R, G, B, - with sync: 1.0Vp-p ±2dB R, G, B, - without sync: 0.7Vp-p ±2dB Pb, Pr 0.7p-p ±2dB DC Offset ±2V Nominal Impedance 75 ohms SYNC(Interlaced or Progressive Scan Format) Horizontal Frequency Range 15 – 150Hz Vertical Frequency Range 1,323 – 150Hz Sync Type Separate H and V Composite (bi-level, tri-level, XOR) Sync-On-Green/luma (bi-level, tri-level) Serrations and/or Equalization pulses MarcoVision compatible Polarity 2 Positive or Negative Input Levels 2 0.5Vpp – 4.0Vpp DC Operating Range 2 ±3V Nominal Impedance 2 75 ohms Horizontal Sync Duty Cycle 3% min, 20% max
7-10Mirage WU-L User Manual020-100774-01 Rev. 2 (4-2012) Section 7: Specifications DVI-I – ANALOG Input Characteristics Same as Analog RGB, except as noted below. Formats RGB or YPbPr – video signal cannot be routed to the decoder Sync Types Separate H and V (direct or swapped) Bi-level – TTL levels only Composite (XOR, OR) Sync-on-green Serrations and/or Equalization pulses MacroVision (standard & progressive) Analog Sync Logic Low 0V – 0.8v Analog Sync Logic High 2.4V – 5V Analog Sync Input Impedance 1kW DVI-I – DIGITAL Input Characteristics meets DVI spec DVI Cable Length 5m Single Link DVI Pixel Rate 25-165 MPix/sec Dual Link DVI pixel rate 165- 330 MPix/sec EDID Supported HDCP (High Speed Digital Content Protection)Unsupported RS-232/RS-422 SERIAL INPUT Connector Type 2 male DB9 (RS-232 OUT, GPIO) 2 female DB9 (RS-232 IN, RS-422 IN) NETWORK CONTROL Ethernet 1 RJ45 connector Maximum Baud Rate 10/100 Mbps REMOTE CONTROL Type Low Frequency IR with wired ability Range 30 Meters Laser Pointer Included Battery Type (2 Required) AA, 1.5V Alkaline WIRED CONTROL Connector Type XLR Input Levels High: 2.2V min. Low: 0.9V max. Power: 500mA @ 5V