Home > Christie > Projector > Christie Projector Mirage S+/HD/WU User Manual

Christie Projector Mirage S+/HD/WU User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Christie Projector Mirage S+/HD/WU User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 150
    Add page 141 to Favourites
    image text
    Enable zoom 
    							  Appendix D: Optional Input Modules 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  D-3 020-100001-07 Rev. 1 (11-2009) 
Features 
 Supports Digital Visual Interface (DVI) single-channel  
 Supports VESA Extended Display Identification Data (EDID)  
 Provides an active-loop-through using a DVI connector (conforming to the 
DVI Specification) 
 
The module accepts a serial digital 4:2:2 component video signal (YCbCr) via a single 
SERIAL IN BNC connector. The signal can loop through the SERIAL OUT BNC out to 
another device (such as another projector). Inputs are 75
 terminated. 
 
SDI Features 
 Accepts serial digital 4:2:2 component video (YCbCr)  
 Provides both a 
SERIAL IN and a SERIAL OUT BNC connector; includes status 
LEDs for signal and error 
 SMPTE 259M compatible 
The Dual SD/HD-SDI Module enables incoming serial digital (SD or HD) data to be 
tiled across multiple screen displays, overlapped for extra-bright displays, or 
distributed to additional projectors for multiple, same-image screens. 
 
 
Dual SD/HD-SDI Features 
 Accepts and decodes up to two serial digital inputs 
 Outputs up to two 10-bit YCbCr 4:2:2 video signals 
 Provides input(s) to output(s) loop-through capability 
 Supplies interchangeable inputs as part of the Picture-in Picture display 
 SMPTE 259M and 372 compatible 
 
 
 
 
 
 
 
  Serial Digital Input Module 
 38-804602-
xx 
 Dual SD/HD-SDI Module 
 38-804656-xx
    Add page 142 to Favourites
    Enable zoom
    Add page 143 to Favourites
    image text
    Enable zoom 
    							Appendix E 
Menu Tree 
 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual  E-1 020-100001-07 Rev. 1 (11-2009) 
 
The following menu tree provides a graphical representation of the software menu 
structure for the Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, 
DLV. This allows you to quickly locate and navigate to a specific menu, and 
associated options/secondary menus.
    Add page 144 to Favourites
    Enable zoom
    Add page 145 to Favourites
    image text
    Enable zoom 
    							Appendix E: Menu Tree
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User ManualE-3
020-100001-07 Rev.1 (11-2009)
Main Menu
1. Size & Position
2. Image Settings
3. Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP and Switching 
8. Test Pattern
Size & Position
1. Resize Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. H-Position
7. V-Position
8. Reserved
9. Reserved
0. Advanced Size & Position
Advanced Size & Position
Active Input Window
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play Display (EDID)
Channel Setup
This is a list of all of the 
channels that have been 
defined for this projector.
Channel Copy Delete
1. Copy
2. Delete
3 Delete Locked Only
4. Delete All Channels
See Page E-4 for 4. 
Configuration
Image Settings
1. Contrast
2. Brightness
3. Gamma
4. Filter
5. Detail
6. Noise Reduction
7. Color Space
8. Video options
9. Input levels
0. Advanced Image Settings
Input Levels
1. Auto Input Level
2. Red Blacklevel
3. Red Input Drive
4. Green Blacklevel
5. Green Input Drive
6. Blue Blacklevel
7. Blue Input Drive
8. Auto Color Enable
9. Clamp Location
0. Peak Detector
Color Enable
Advanced Image Settings
1. Gamma Table
2. Select Color Adjustment
3. Color Temperature
4. Optical Aperture
5. Reserved
6. Simulation 3D
7. Motion Filter
8. Film Mode Threshold
9. Detail Threshold
0. 3D Source *
Floating Inputs
Simulation 3D
Frame Delay Monitor
1. Frame Delay
2. Dark Interval *
3. 3D Sync Input *
4. 3D Sync Output *
5. 3D Stereo Sync Delay *
6. Frame Lock Enable *
7. 3D Source *
PIP and Switching 
1. Swap Main and PIP images
2. PIP Enable
3. PIP Size & Position
4. PIP Image Settings
5. PIP Border Width
6. PIP Border Color
7. Image Optimization
8. Reserved
9. Numbers Select Main Image
PIP Size & Position
Active Input Window
1. Position Presets
2. Size
3. Vertical Stretch
4. Pixel Track
5. Pixel Phase
6. PIP H-Position
7. PIP V-Position
8. Aspect Ratio Presets
9. Reserved
0. Advanced Size & PositionPIP Image Settings
1. Contrast
2. Brightness
3. Gamma
4. Filter
5. Detail
6. Noise Reduction
7. Color Space
8. Video options
9. Input levels
0. Advanced Image Settings
PIP Video options
1. Enable Decoder AGC
2. Video Standard
3. Input Video Black
4. Color
5. Tint
6. Decoder/Luma DelayAdvanced Size & Position
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play Display (EDID)
PIP Input Levels
1. Auto Input Level
2. Red Blacklevel
3. Red Input Drive
4. Green Blacklevel
5. Green Input Drive
6. Blue Blacklevel
7. Blue Input Drive
8. Auto Color Enable
9. Clamp Location
0. Peak Detector
Color Enable
PIP Advanced Size & Position
1. Top Blank
2. Bottom Blank
3. Left Blank
4. Right Blank
5. Plug & Play Display (EDID)
Channel Edit
1. Name
2. Number
3. Input
4. In Menu
5. Auto Source
6. Locked
7. Previous Channel
8. Next Channel
Sync Type
H-Sync
V—Sync
Interlace
Press 
on a channel
* Mirage Only
NOTE:No PIP on WU models. 
9. Numbers Select Main Image 
is the only choice on “Switching” 
menu.
Video Options
1. Enable Decoder AGC
2. Video Standard
3. Input Video Black
4. Color
5. Tint
6. Decoder Luma Delay
Press  on a channel
Lamp
Lamp Hours
Lamp S/N
1. Lamp Message
2. Lamp Limit
3. Lamp Mode
4. Power
5. Intensity
6. Optical Aperture
7. Lamp History
8. Change Lamp
    Add page 146 to Favourites
    image text
    Enable zoom 
    							Appendix E: Menu Tree
E-4Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev.1 (11-2009)
Main Menu
1. Size and Position
2. Image Settings
3. Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP and Switching
8. Test Pattern
Configuration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date & Time
6. Menu Preferences
7. Communications
8. Geometry & Color
9. Diagnostics & Calibration
0. Service
Option Card 1: Dual SD/HD-SDI
Option Card 2: Empty
Menu Preferences
1. Large Menu Font
2. Menu Location
3. Horizontal Shift
4. Vertical Shift
5. Display Channel List
6. Display Slidebars
7. Display Error Messages
8. Splash Screen Setup
Set Date & Time
1. Date
2. Time
Communications
1. Baud Rate for RS232
2. Baud Rate for RS422 
3. Projector 
4. Network Routing
5. Ethernet Settings
6. Broadcast Key
7. Backlight
8. Front IR Protocol
9. Rear IR Protocol
0. Wired Keypad Protocol
Ethernet Settings
1. DHCP Enabled
2. IP Address
3. Port
4. Subnet Mask
5. Default Gateway
6. Network Name
7. ArtNet Interface Settings
Main Menu continued
Option 1 Card: Dual SD/HD-SDI
1. Loop Thru Output Selection
2. Configure Channels
Note: Configuration Menu Displays the option card that is 
installed in Input 5 and Input 6 
option slot(s).
Diagnostics & Calibration
1. Test Pattern
2. Grey Level
3. Freeze Image
4. Color Enable
5. Odd Pixel Adjustment
6. Reserved
7. Peak Detector
8. Level Detector
9. Level Value
0. Aspect Ratio Overlay
LiteLOC Calibration
ILS CalibrationSee Page E-5 for:
8. Geometry & Color
ArtNet Interface Settings
1. ArtNet Subnet
2. ArtNet Universe
3. ArtNet Advanced Mode
4. ArtNet Base Channel
5. ArtNet Device Name
6. ArtNet Device Description
Requires a service password to enter the Service Menu.
Loop Thru Output Selection
1. Input A to C, Input B to D
2. Input A to D, Input B to C
3. Main to C, PIP to D
4. Main to D, PIP to C
Configure Channels
1. Automatic
2. Two Single Channels
3. 4:4:4 RGB Dual Link, Channel A Primary
4. 4:4:4 RGB Dual Link, Channel B Primary
5. 4:4:4 YCbCr Dual Link, Channel A Primary
6. 4:4:4 YCbCr Dual Link, Channel B Primary
7. 4:2:2 YCbCr Dual Link, Channel A Primary
8. 4:2:2 YCbCr Dual Link, Channel B Primary
    Add page 147 to Favourites
    image text
    Enable zoom 
    							Appendix E: Menu Tree
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User ManualE-5
020-100001-07 Rev.1 (11-2009)
Main Menu
1. Size and Position
2. Image Settings
3. Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP Switching
8. Language
9. Test Pattern
Configuration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date & Time
6. Menu Preferences
7. Communications
8. Geometry & Color
9. Diagnostics & Calibration
0. Service
Option 1 Card: Dual SD/HD-SDI
Option 2 Card Empty
Main Menu continued
Color Adjustments by X,Y
1. Select Color Adjustment
2. Color Temperature
Color Space Valid
3. Red X
4. Red Y
5. Green X
6. Green Y
7. Blue X
8. Blue Y
9. White X
0. White Y
Auto Color Enable
Color Enable
Copy From
Color Saturation
1. Select Color Adjustment
2. Color Temperature
3. Red Color Adjustments
4. Green Color Adjustments
5. Blue Color Adjustments
6. White Color Adjustments
7. Auto Color Enable
8. Color Enable
9. Copy From
0. Lamp
Red Color Adjustments
1. Select Color Adjustment
2. Color temperature
By x,y equivalent
3. Red Part of Red
4. Green Part of Red
5. Blue Part of Red
6. Next Color
7. Copy From
Green Color Adjustments
1. Select Color Adjustment
2. Color Temperature
By x,y equivalent
3. Red Part of Green
4. Green Part of Green
5. Blue Part of Green
6. Next Color
7. Copy From
Blue Color Adjustments
1. Select Color Adjustment
2. Color Temperature
By x,y equivalent
3. Red Part of Blue
4. Green Part of Blue
5. Blue Part of Blue
6. Next Color
7. Copy From
White Color Adjustments
1. Select Color Adjustment
2. Color Temperature
By x,y equivalent 
3. Red Part of Red
4. Green Part of Green
5. Blue Part of Blue
6. Next Color
7. Copy From
Geometry & Color
1. Test Pattern
2. Keystone**
3. Brightness Uniformity    
4. Edge Blending 
5. Color Adjustments by X,Y
6. Color Saturation
7. Black Level Blending
8. Default Color Adjustment
9. Brightness Matching
0. Intelligent Lens System (ILS)
See Page E-3 for 0. Lamp
Edge Blending
1. Edge Blending
2. Test Pattern
3. Left Blend Width
4. Right Blend Width
5. Top Blend Width
6. Bottom Blend Width
7. Color Enable
8. Lamp
9. Show Blending Overlap
0. More...
See Page E-3 for 8. Lamp
Edge Blending (2)
1. Left Blend Shape
2. Left Blend Midpoint
3. Right Blend Shape
4. Right Blend Midpoint
5. Top Blend Shape
6. Top Blend Midpoint
7. Bottom Blend Shape
8. Bottom Blend Midpoint
See Page E-6 for 3. Brightness Uniformity
NOTE:On WU models only 
Keystone and Warping 
when Christie TWIST 
installed; otherwise 
Reserved.
** If Christie TWIST 
installedKeystone and Warping
1. Warp Select
2. 2D Keystone
3. Warp Pre-Filter Horizontal
4. Warp Pre-Filter Vertical
5. Warp Sharpness
6. Warp Latency
2D Keystone
1. Top Left H-Position
2. Top Left V-Position
3. Top Right H-Position
4. Top Right V-Position
5. Bottom Left H-Postion
6. Bottom Left V-Postion
7. Bottom Right H-Postion
8. Bottom Right V-Postion
    Add page 148 to Favourites
    image text
    Enable zoom 
    							Appendix E: Menu Tree
E-6Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev.1 (11-2009)
Brightness Uniformity
1. Brightness Uniformity Enable
2. Test Pattern
3. Left Uniformity
4. Right Uniformity 
5. Top Uniformity
6. Bottom Uniformity
7. White Uniformity
8. Color Adjustments by X,Y
9. Color Saturation
0. Lamp
Brightness Matching
Configuration
1. Language
2. Image Orientation
3. Reserved
4. Auto Power Up
5. Set Date & Time
6. Menu Preferences
7. Communications
8. Geometry & Color
9. Diagnostics & Calibration
0. Service
Option 1 Card: Dual SD/HD-SDI
Option 2 Card Empty
Main Menu
1. Size and Position
2. Image Settings
3. Channel Setup
4. Configuration
5. Lamp
6. Status
7. PIP Switching
8. Language
9. Test Pattern
Geometry & Color
1. Test Pattern
2. Keystone
3. Brightness Uniformity    
4. Edge Blending 
5. Color Adjustments by X,Y
6. Color Saturation
7. Black Level Blending
8. Default Color Adjustment
9. Brightness Matching
0. Intelligent Lens System (ILS)
Main Menu continued
Left Uniformity
1. Left Side R
2. Left Side G
3. Left Side B
4. Top Left Corner R
5. Top Left Corner G
6. Top Left Corner B
7. Bottom Left Corner R
8. Bottom Left Corner G
9. Bottom Left Corner B
0. Color EnableRight Uniformity
1. Right Side R
2. Right Side G
3. Right Side B
4. Top Right Corner R
5. Top Right Corner G
6. Top Right Corner B
7. Bottom Right Corner R
8. Bottom Right Corner G
9. Bottom Right Corner B
0. Color EnableTop Uniformity
1. Top Edge R
2. Top Edge G
3. Top Edge B
4. Top Left Corner R
5. Top Left Corner G
6. Top Left Corner B
7. Top Right Corner R
8. Top Right Corner G
9. Top Right Corner B
0. Color Enable
Bottom Uniformity
1. Bottom Edge R
2. Bottom Edge G
3. Bottom Edge B
4. Bottom Left Corner R
5. Bottom Left Corner G
6. Bottom Left Corner B
7. Bottom Right Corner R
8. Bottom Right Corner G
9. Bottom Right Corner B
0. Color Enable
White Uniformity
1. Left Side 
2. Right Side 
3. Top Edge
4. Bottom Edge
5. Top Left Corner
6. Top Right Corner
7. Bottom Left Corner R
8. Bottom Right Corner G
9. Overall
    Add page 149 to Favourites
    Enable zoom
    Add page 150 to Favourites
    image text
    Enable zoom 
    							For the most current technical documentation, please visit  www.christiedigital.com 
USA – Cypress
ph: 714-236-8610
Canada – Kitchener
ph: 519-744-8005United Kingdom
ph: +44 118 977 8000
Germany
ph: +49 2161 664540
France
ph: +33 (0) 1 41 21 44 04Hungary/Eastern Europe
ph: +36 (0) 1 47 48 100
Singapore
ph: +65 6877 8737
Shanghai
ph: +86 21 6278 7708Beijing
ph: +86 10 6561 0240
Korea
ph: +82 2 702 1601
Japan
ph: +81 3 3599 7481
Corporate offi ces Worldwide offi ces
    All Christie manuals Comments (0)

    Related Manuals for Christie Projector Mirage S+/HD/WU User Manual