Christie Projector J Series 1000W & 1200W User Manual

Section 3: Operation
J Series 1000W and 1200W User Manual3-11020-100706-02  Rev. 1  (03-2014)
Editing Text
Activate the Edit Window: To enter or edit text, highlight the desi red parameter (such as a channel name) and 
press  E
NTER to activate its adjacent edit window. Any previously entered text is di splayed with its first 
character highlighted in  a square cursor, signifying that  this character is ready for editing.
Navigate Within the Edit Window:  Press R
IGHT ARROW KEY to move the cursor forward...

3-12J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
Enter “07” to use this channel. If you press any non-numbered key, the  number entered up to that point is 
accepted and updated as the new value. Press  E
XIT to cancel editing of numerical values.
3.3 Using Inputs and Channels
The projector stores and recalls up to 99 different channe ls (source setups) for a variety of inputs. This memory 
feature allows you to define and use a variety of custom ized setups....

Section 3: Operation
J Series 1000W and 1200W User Manual3-13020-100706-02  Rev. 1  (03-2014)
3. Use the following menu options to select the source of the image for the main or PIP/Secondary image.      
- menu options  Menu > Input Switching & PIP  > Main Input and  Menu  > Input Switching & PIP  
>  PIP Input                                                                                                                 
The image will be displayed  according to the following:
If it is the first time...

3-14J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
3.4 Channel Setup Menu
All available channels are listed in the Channel Setup menu, which describes how each channel can be 
accessed and provides access for editing,  copying and deleting channels.
Press  M
ENU from the presentation level to display the  Main menu. To display the  Channel Setup menu, press 
3, or move the highlight to the Channel Setup  option and press E
NTER. The Channel Setup  menu will...

Section 3: Operation
J Series 1000W and 1200W User Manual3-15020-100706-02  Rev. 1  (03-2014)
Table 3.1 - Abbreviations for Signal Type
The first 5 items in this table are analog RGB with various sync combinations indicating Sync Source when 
editing the channel: 
TO COPY A CHANNEL , highlight the desired channel in the  Channel Setup menu, then press  E
NTER to go 
to the  Select Channel Operation  submenu. Select “Copy” and press  E
NTER—a new channel will be created. It 
is identical to original,...

3-16J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
TO DELETE A CHANNEL, highlight the desired channel in the  Channel Setup menu, then press  ENTER to 
activate the  Select Channel Operation  submenu. Select Delete and press  E
NTER—a window will appear to 
confirm the deletion of this channel.
TO DELETE MULTIPLE CHANNELS  highlight any channel in the Channel Setup menu and press  E
NTER 
to go to the  Select Channel Operation  submenu. Select Delete Unlocked...

Section 3: Operation
J Series 1000W and 1200W User Manual3-17020-100706-02  Rev. 1  (03-2014)
If desired, review and/or edit the following channel setups in the Channel Edit  menu:
• NAME  
An alphanumeric label can be defined and/or changed  here. Channel names can be up to 12 characters in 
length. The default name is the horizontal and vertical sync frequencies.
• CHANNEL
 A two-digit channel number can be changed here. 
NOTES: 1)  If you enter a channel number that already 
exists, a dialog message...

3-18J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
your presentation. 2) To hide “direct” slide bars, disable the  Display Slide bars check box in the Menu 
Preferences  menu. 
3) To hide the entire menu system from view,  turn off the on-screen display by pressing 
OSD then the  D
OWN ARROW KEY.
For a good and efficient first step in perfecting the image, press the auto setup button,  A
UTO. This optimizes 
critical display parameters such as si ze, position,...

Section 3: Operation
J Series 1000W and 1200W User Manual3-19020-100706-02  Rev. 1  (03-2014)
Resize Presets will display an im age in its native 
resolution (no resizing) or  will resize the image 
by maximizing either the height, width or both 
height and width, or will resize to the maximum 
size possible while keeping the original aspect 
ratio. 
Size, Position and Blan king parameters will 
automatically adjust acco rdingly or, if Blanking 
is set first, which defines an Active Input Area;  
Resize...

3-20J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
 FULL SIZE - uses  all pixels  for displaying the image, 
regardless of source or original aspect ratio. Incoming 
source material having a di fferent aspect ratio than the 
projector will be stretched for display. 
FULL WIDTH - fills the projector display from left-to-right 
without changing the original  aspect ratio of the image. 
Depending on the source, data at the top and bottom may be 
discarded...