Christie Projector J Series 1000W & 1200W User Manual

J Series 1000W and 1200W User Manual3-1020-100706-02  Rev. 1  (03-2014)
3 Operation
This section describes the controls and switches used for basic projector operation once it is properly installed, 
aligned and configured by a  Christie accredited service technician. 
  Refer to Safety Warnings and Guidelines in  Section 5 Maintenance.
3.1 Operating the Projector
Control the projector using on e of the following options:
• Remote Keypad  for wired or wireless remote control 0.25 fo ot (8m) cable is...

3-2J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
Remote Keypad
FIGURE 3-1 REMOTE KEYPAD 

Section 3: Operation
J Series 1000W and 1200W User Manual3-3020-100706-02  Rev. 1  (03-2014)
Wired Remote
You can convert the remote keypad into a wired remote keypad using the cable provided with the projector. 
Connect one end into the remote an d the other to the XLR connector on the input panel labeled as wired 
keypad. The wired remote  is recommended when:
• The built-in keyp ad is inaccessible
• The lighting conditions are unsuitab le for proper IR transmission 
NOTE: Leave the batteries in the...

3-4J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
•Help Key , only available in the On Scr een Display (OSD) context; LED is  Amber when the menu is being 
displayed on the projected image display; when no menu is  being displayed, the Help key is still enabled if 
the OSD is enabled. It is only disab led when the entire OSD is set to OFF.
• Auto Key , enabled state when the power is ON, and there are no test pattern s on the screen. If the power is 
OFF  or a...

Section 3: Operation
J Series 1000W and 1200W User Manual3-5020-100706-02  Rev. 1  (03-2014)
Channel
Select a specific source setup (channel) defined and stored in projector memory. Once you enter a two-digit 
channel number (or, if there is a list displayed, highlight it and press  E
NTER), the display will automatically 
change and update according to the numerous  setup parameters defined for that channel. 
NOTE: A new channel 
is automatically created if you ad just an image from a new source.
NOTE:...

3-6J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
Number Keys
Press 1 to 9 to enter a value in a text box or to select a menu item.
10+ 
Press  0 before pressing another number to ente r a number greater than 9, e.g. press 0 then 2 to enter the 
number 12 as a menu selection. 
NOTE:  When entering numbers in a text  field, this button acts as 0.
Help
Press  H
ELP to display context-sensitive help. Press  HELP again to toggle the help window OFF.
Menu
Press  M...

Section 3: Operation
J Series 1000W and 1200W User Manual3-7020-100706-02  Rev. 1  (03-2014)
IF WITHIN A PRESENTATION: Press FUNC followed by two numeric 
numbers to enable a specific color or colors in the display (see right). For 
example,  will display only  red, and   will display 
green data. Eliminating one or more colo rs can help with certain diagnostics 
and setups, such as when accurately ov erlaying one image on top of another 
from stacked projectors. 
NOTE:  Color enabling can also be...

3-8J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
Lens H and Lens V
When adjusting the image for focus, zoom or horizontal and vertical positioning, use the specific arrow keys 
(L
EFT/RIGHT ARROW  KEY or  UP/DOWN ARROW KEY) related to each function. A  small window will appear to 
indicate the type of adjustment taking place. For example,
• Use the  F
OCUS and the LEFT ARROW or RIGHT ARROW KEY to improve image clarity as desired.
• Use the  Z
OOM and the LEFT...

Section 3: Operation
J Series 1000W and 1200W User Manual3-9020-100706-02  Rev. 1  (03-2014)
NOTES: 1) If there is no signal present, all so urce-dependent adjustments are disabled. 2) After 15 minutes of 
inactivity, the projector leaves the menu  system and returns to the presentation. 
3) The Status menu is read-
only.
On-line Help
Press  H
ELP to display summary information about the  current menu or highlighted option. Press HELP again to 
exit.
The Global Icon
Menu options that include this icon...

3-10J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   (03-2014)
Section 3: Operation
Use the arrow keys to adjust a direct slide bar, or press ENTER and enter a specific number from the keypad, 
then  E
NTER or LEFT ARROW KEY or RIGHT ARROW KEY to save (or  EXIT to cancel). When you are done, press 
E
XIT to save and return to your presentation.
NOTES: 1) You can still adjust a direct slide bar as  usual if the display is turned off (see OSD or Menu 
Preferences  menu) — the slide bar just...