Christie Projector J Series 1000W & 1200W User Manual

J Series 1000W and 1200W User Manual4-1020-100706-02  Rev. 1   03-2014
4 Web User Interface
4.1 Logging On
IMPORTANT!  Before logging on to the s ystem, ensure that you select  the appropriate language 
required. Your language selection only affects th e web user interface. The language used by the 
projector on-screen display  (OSD) is not affected. See Figure 4-1. 
1. Open your web browser and type the IP address  (in the address bar) assigned to your projector.
2. Select the appropriate language from...

4-2J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   03-2014
Section 4: Web User Interface
The following table describes each area found in the Main window. See Figure 4-3.
4.2 Navigating the Web User Interface
It is not recommended that you use the we b browser navigation functionality (i.e. the  Back and Forward 
functions) as this will cause you to  lose your web connection. It is recommended that you navigate using the 
application interface an d related functionality detailed in this...

Section 4: Web User Interface
J Series 1000W and 1200W User Manual4-3020-100706-02  Rev. 1  (03/2014)
4.3 Basic Operation
This section discusses the primary tabs located along the top of the application window. Each primary tab also 
has related secondary tabs which  are located along the bottom of each tabbed page as follows:
•Main • General
• Status
•Lens
•Tools •Virtual OSD
•Admin •System
• Users
•Advanced •RTE
•Serial
•About •Version
•License
4.3.1 Main Tabbed Page - General
Under the Main  tabbed...

4-4J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   03-2014
Section 4: Web User Interface
4.3.3 Main Tabbed Page - Lens 
Under the Main tabbed page, select the  Lens secondary tab to define your ad justment settings for the lens. For 
detailed information, refer to  Section 3 Operation.
4.3.4 Tools Tabbed Page - Virtual OSD 
Under the To o l s tabbed page, select the  Virtual OSD secondary tab to access to the virtual OSD page. See 
Figure 4-6 .
FIGURE 4-6 TOOLS WINDOW
 The following table...

Section 4: Web User Interface
J Series 1000W and 1200W User Manual4-5020-100706-02  Rev. 1  (03/2014)
Virtual OSD Menu
By selecting an option from a menu, its associated window 
appears, showing related information and input fields. To 
return to the previous menu,  click the menu title bar (see 
Figure 4-7 ). 
To return to a previous menu,  click on the current menu title 
bar or press  ESC. 
NOTE:  It is recommended to click the 
Maximize  button to view the full screen size.
There are various types of...

4-6J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   03-2014
Section 4: Web User Interface
SELECTING A OPTION FROM A DROP-DOWN LIST
1. Click the option drop-down arrow to open the drop-down list. 
2. Locate and select the desired option.
FIGURE 4-9 TYPES OF MENU ELEMENTS
SELECTING OR CLEARING A CHECK BOX
To select or clear a check box, click the check box with your mouse pointer. This enables or clears the option 
respectively.
4.3.5 Admin Tabbed Page - System
Under the Admin  tabbed page,...

Section 4: Web User Interface
J Series 1000W and 1200W User Manual4-7020-100706-02  Rev. 1  (03/2014)
The following table describes each area found in the Admin window. See Figure 4-10.
Uploading a Logo File or Gamma File
Important:  The projector must be powered on to enable the  Upload drop-down list .
1. Click the Upload  Browse button to open the  Choose file window. 
2. Locate and select the file you wish to upload fro m a Network drive location or from your hard drive. 
3. Select the file type (...

4-8J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   03-2014
Section 4: Web User Interface
4. Click the Upload button to display the  Logo Upload window.
a. Enter a descriptive name in the  Display Name field.
b. Click the  Upload button to display the  Gamma Upload window. Click Ye s or No  to confirm or cancel 
the upload respectively.
An  Upload in Progress  window appears. 
Creating a Backup File
1. Select a  file type ( All, Preferences , Configuration , Channels , or Users ) from the...

Section 4: Web User Interface
J Series 1000W and 1200W User Manual4-9020-100706-02  Rev. 1  (03/2014)
Creating a User Name and Password
1. Click Add User  to open the  Add User window. See  Figure 4-11.
2. Type your username and password in the  User name and Password  
fields respectively.
3. Re-type your password in the  Re-type Password field.
4. Click  Ok to save.
Change Password
1. Select the user whose password you wish to change from the  Users  window. See  Figure 4-12.
2. Click  Change Password...

4-10J Series 1000W and 1200W User Manual020-100706-02  Rev. 1   03-2014
Section 4: Web User Interface
TO ADD A SCHEDULED EVENT
1. Click Add to open the  RTE Wizard .
2. Select the  Scheduled Event  tab. 
NOTE: The scheduled tab is always selected by default on add.
FIGURE 4-14 SCHEDULED EVENT WINDOW
3. Select the frequency option for  the event by selecting either Once, Daily , We e k l y , or Monthly . NOTE: 
End Date is enabled when Daily, Weekly or Monthly repeat options are selected.
4. Click within...