Christie Projector CP2230 User Manual

Appendix B: Serial API
CP2230 User ManualB-25020-100430-07 Rev. 1 (05-2014)
CxxxReplace xxx with the channel num ber. Valid range is 101 - 164.
NONE Select source format for the current channel.
EXAMPLES:
(SRF+C108 “XXX”) Use file “XXX” on channel 108
(SRF+C108?) Get source fi le name on channel 108
(SRF?L) List all entrie s of source control
(SRF+RFSH 1) Refresh TI file list
System Status (SST)
R
etrieve the various system status groups.
SUBCODEDESCRIPTION OF USE
ALRM Returns a summary of any active...

B-26CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
SUBCODEDESCRIPTION OF USE
NONE 0 - restart DLP communications; 
1 - stop DLP communications.
EXAMPLES:
(STP 0) Restart  DLP communication
(STP 1) Stop DLP communication
(STP?) Request current state. Example re sponse is (STP!000)
cinema projector Platform and Motherboard Related Information (SYS)
Query only command that returns version information.
SUBCODEDESCRIPTION OF USE
BACB Return backplane version information.
FA C B Return...

Appendix B: Serial API
CP2230 User ManualB-27020-100430-07 Rev. 1 (05-2014)
3D DARK TIME (TDK)
Set dark time for 3D control. This controls how much time between displayed images the output remains dark to 
allow for the glasses on other gating m echanism to flip between the eyes. 
SUBCODEDESCRIPTION OF USE
Cxxx Replace xxx with the channel num ber. Valid range is 101 - 164.
NONE Select dark time for the current channel
EXAMPLES:
(TDK+C101 1) Set dark time to 1 on channel 101
(TDK+C101?) Get dark time on...

B-28CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
L/R Display Sequence (TFD)
Set L/R Display Sequence for 3D control. This selects which signal is considered first in the source signal, the left 
or the right. 
SUBCODEDESCRIPTION OF USE
Cxxx Replace xxx with the channel  number. Valid range is 101 - 164.
NONE Select L/R display sequenc e for the current channel 
EXAMPLES:
(TFD?L) List all entries on Input Frame Dominance control
(TFD+C101 1) Set Input Frame  Dominance to 1 on...

Appendix B: Serial API
CP2230 User ManualB-29020-100430-07 Rev. 1 (05-2014)
Time/Date (TMD)
Set/get the time, date and time zone.
SUBCODEDESCRIPTION OF USE
DATE Get the date in the form yyyy/mm/dd. Read-only.
DSTA Set/get the daylight savi ngs time adjust value.
TIME Set/get the local time in the form hh:mm:ss. Ready only.
TOFF Set Time Offset in seconds (± 900 sec onds). Must be powered ON. (Write-only)
ZONE Set/get the time zone
EXAMPLES:
(TMD+DSTA?) 0 or 1 (DST OFF or DST ON)
(TMD+DSTA 0) Turn...

B-30CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
Zoom Lens Position Adjustment (ZOM) 
Adjust lens to specific zoom position with a specified direction (1, -1). NOTE: This command can only be used to 
update the current ILS file . Changing the zoom for the current channel will change the zoom for any channel using 
the same ILS file.
Use command wi thout subcode:
•  If ILS is ON, motor will move to specified steps and save data to the active channel.
•  If ILS is OFF, motor will...

*000-101832-07*
ASSY TECH DOCS CP2230 

Japan
ph: 81-3-3599-7481
South Korea
ph: +82 2 702 1601
For the most current technical documentation, please visit  www.christiedigital.com 
USA – Cypress
ph: 714-236-8610
Canada – Kitchener
ph: 519-744-8005United Kingdom
ph: +44 118 977 8000
France
ph: +33 (0) 1 41 21 00 36
Germany
ph: +49 2161 664540Eastern Europe
ph: +36 (0) 1 47 48 100
Middle East
ph: +971 (0) 4 299 7575
Spain
ph: + 34 91 633 9990 Singapore
ph: +65 6877-8737
Beijing
ph: +86 10 6561 0240
Shanghai
ph: +86 21 6278 7708
Corporate offi ces...