Christie Projector CP2230 User Manual

Appendix A: Specifications
CP2230 User ManualA-7020-100430-07 Rev. 1 (05-2014)
A.4.2 TPC-650H
Type of DisplayColor VGA TFT LCD, backlit
Display Size 144.8 mm (5.7 inches) diagonal
Display Resolution (H x V pixels) 640 x 480
Maximum Dimensions (W x H x D) 195 mm x 148 mm x 58 mm
Integrated Operating System Microsoft Windows
® XPe
Communication Interface w ith cinema projector 10/1000Base-T Ethernet
Power Requirement 0.71A (typical)
Interface Connector  12-pin Ci rcular connector (push-pull)
A.5 Power...

A-8CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix A: Specifications
A.5.4 Lamp Power Supply Output to Projection Head
Operating Voltage Range 18-46 VDC
Start-up Voltage (Open Circuit) 135-175 VDC
Operating Current Range 50-180 A
Ripple  1% max (at 25°C, rated input and rated output)
Connector Type Field Wireable Lugs
A.5.5 Lamp Power Supply Power Receptacle Output
Operating Voltage Range 200-230 VAC
Operating Current Range - Projection Head 6 A
Operating Current Range - Heat Extractor  1 A...

Appendix A: Specifications
CP2230 User ManualA-9020-100430-07 Rev. 1 (05-2014)
Wait time between lamp strikes: 2 minutes min.
Warm-up time to full brightness 20 minutes max.
NOTE : cinema projectors typically force a 10 minute cool  down period. Ensure you do not re-strike the lamp 
any sooner than 2 minu tes into this cool down period  since hot re-strikes reduce lamp life. 
Other lamps with bulb diameters no t exceeding 70mm may also be used , however the cinema projector may 
not meet its specified...

A-10CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix A: Specifications
Environmental
• EU Directive (2002/95/EC) on the restriction of the uses of certain hazardous substances (RoHS) in electri-
cal and electronic equipment and the applicable official amendment(s)
• EU Directive (2002/96/EC) on waste and electrical  and electronic equipment (WEEE) and the applicable 
official amendment(s)
• Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorization and Restriction of...

Appendix A: Specifications
CP2230 User ManualA-11020-100430-07 Rev. 1 (05-2014)
• 5.5-8.0 DLPCine HB Zoom Lens (108-280101-01)
High Contrast Prime Zoom Lenses
• 1.25-1.45 DLPCine HC Zoom Lens (38-809079-01)
• 1.45-1.8 DLPCine HC Zoom Lens (38-809061-01)
• 1.8 - 2.4 DLPCine HC Zoom Lens (38-809052-01)
• 2.2-3.0 DLPCine HC Zoom Lens (38-809053-01)
• 3.0-4.3 DLPCine HC Zoom Lens (38-809069-01)
• 4.3-6.1 DLPCine HC Zoom Lens (38-809081-01)
• 5.5-8.5 DLPCine HC Zoom Lens (38-809080-01)
Auxiliary Lenses
•...

CP2230 User ManualB-1020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
This section provides a list of serial API commands that you can run to modify cinema projector settings.
B.1  Function Codes
Auxiliary Motorized Lens (AML)
Control the motorized auxiliary le ns (anamorphic or converter lens). Reset all preference and configuration settings in the 
device to their default values. The value of  111 must be sent with each of the sub codes as well as the default. The number 111  
helps prevent...

B-2CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
Backup (BCK)
Backup configuration, preferences, channel data, user data and ICP files to a file that can later be restored.
SUBCODEDESCRIPTION OF USE
NONE Run a backup, argument 1 to start backup, argument 0 does nothing.
STAT Get the backup status.
EXAMPLES:
(BCK 1) Start a backup. The fi le is saved to the FTP root.
(BCK+STAT?) Returns the status of the last  backup and the location of the resulting file.
Baud Rate (BDR)
Set the...

Appendix B: Serial API
CP2230 User ManualB-3020-100430-07 Rev. 1 (05-2014)
Color Space (CSP)
Color space control, color space file will be set when PCF in Use (PIU) is OFF. This control describes the source colorimetry 
information. Can use index or  text string to set control.
SUBCODEDESCRIPTION OF USE
Cxxx Replace xxx with the channel num ber. Valid range is 101 - 164.
NONE Select color space for the current channel
EXAMPLES:
(CSP+C108 “RGB Unity”) Use file “RGB Unity” on channel 108
(CSP+C108?) Get...

B-4CP2230 User Manual020-100430-07 Rev. 1 (05-2014)
Appendix B: Serial API
NONESet/get the minimum log level to write to the log. 
EXLG Extract entries from log fi les. Requires 3 parameters : ”startdate”, “enddate”, “logtype”. The data parame-
ters require the date in the form at “yyyymmdd”. The logtype paramete r can have the following values: 
“ENG” (engineering), 
“SEC” (security), 
“OPR” (operational), 
“MAI” (maintenance), 
“EVE” (event), 
“SYS” (system), 
“ALL”.
EXAMPLES:
(DLG “20091108”...