Christie Digital Systems Lx400 User Manual

49
OPTION Menu
Item Description
SECURITY
(continued)
2.2-4  Move the cursor to the right side of the 
PASSWORD AGAIN BOX and press the 
► button to display the PASSWORD for 
about 20 seconds, please make note of the 
PASSWORD during this time. 
Pressing the ENTER button on the remote control 
or INPUT button on the projector will return to 
MyScreen PASS WORD on/off menu.
When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock menu...

50
OPTION Menu
Item Description
SECURITY
(continued)
3.1-3   Input a 4 part PIN Code using the ▲/▼/◄/►
/RGB and INPUT buttons. 
The PIN CODE AGAIN BOX will appear. 
Reenter the same PIN Code. This will 
complete the PIN Code registration.
• If there is no key input for about 55 seconds while 
the PIN BOX or the PIN CODE AGAIN BOX is 
displayed the menu will close. If necessary repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power switch is turned off the PIN BOX...

51
OPTION Menu
Item Description
SECURITY
(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to 
supply to the projector, it might react as below.
• Transition Detector alarm shown below might appear on screen, if the 
projector has been moved or re-installed.
• Transition Detector alarm might appear on screen, if the MIRROR setting 
has been changed.
• Keystone adjustment feature has been prohibited as long as the Transition...

52
OPTION Menu
Item Description
SECURITY
(continued)4.3 Setting the Transition Detector off
4.3-1  Follow the procedure in 4.1-1 to display the Transition Detector on/off 
menu.
4.3-2  Select TURN OFF to display the ENTER PASSWORD BOX (large). 
Enter the registered PASSWORD and the screen will return to the 
Transition Detector on/off menu.
If an incorrect PASSWORD is input the menu will close. If necessary repeat 
the process from 4.3-1.
4.4 If you have forgotten your PASSWORD
4.4-1  Follow the...

53
Item Description
SECURITY
(continued)5.2 Displaying the MY TEXT
(1)  Use the ▲/▼ buttons on the SECURITY menu 
to select the MY TEXT DISPLAY menu and 
press the ► button to display the MY TEXT 
DISPLAY on/off menu.
(2)  Use the ▲/▼ buttons on the MY TEXT DISPLAY 
on/off menu to select on or off.
TURN ON 
 TURN OFF
When it is set TURN ON, the MY TEXT will be 
displayed on the START UP screen. Whichever 
is selected, the MY TEXT will be displayed on the 
INPUT-INFORMATION when the INFORMATION 
on the...

54
OPTION Menu
Item Description
SECURITY
(continued)
5.3-3  Turning the MY TEXT PASSWORD off
(1)  Follow the procedure in 5.3-1 to display the MY 
TEXT PASSWORD on/off menu.
(2)  Select TURN OFF to display the ENTER 
PASSWORD BOX (large). Enter the registered 
PASSWORD and the screen will return to the 
MY TEXT PASSWORD on/off menu. 
If an incorrect PASSWORD is input, the menu will close. If necessary, repeat 
the process from 5.3-3(1)
5.3.4 If you have forgotten your PASSWORD.
(1)  Follow the procedure...

55
Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
Select “NETWORK” from the main menu to access the 
following functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor button on the projector or remote control, or ENTER 
button on the remote control to execute the item. Then perform it...

56
NETWORK Menu
NETWORK Menu (continued)
Item Description
SETUP
(continued)
IP 
ADDRESS
Use the ▲/▼/◄/► buttons to 
enter the IP ADDRESS. This 
function can only be used when 
DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this 
projector on the network. You cannot have two devices 
with the same IP ADDRESS on the same network.
• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET 
MASKUse the ▲/▼/◄/► buttons to 
enter the same SUBNET MASK 
used by your PC. This function 
can only be used...

57
NETWORK Menu
NETWORK Menu (continued)
Item Description
PROJECTOR 
NAME(1)  Use the▲/▼ buttons on the NETWORK menu to select the 
PROJECTOR NAME menu and press the ► button. The 
PROJECTOR NAME dialog will be displayed.
(2)  The current PROJECTOR NAME 
will be displayed on the first 3 lines. 
If not yet written, the lines will be 
blank. 
Use the ▲/▼/◄/► buttons and 
the ENTER or INPUT button to 
select and enter characters. The 
RESET button can be used to 
erase 1 character at a time. Also if 
you...

58
NETWORK Menu
NETWORK Menu (continued)
Item Description
e-SHOT Selecting this item displays the e-SHOT 
menu. 
The application software “PJTransfer” 
is required to store image(s) into the 
projector.
Use the ▲/▼ buttons to select an item which is a still image by the 
e-SHOT (
 e-SHOT (Still Image Transfer) Display of the User’
s Manual - Network Guide) and the ► or ENTER button to display 
the image.
• The item without image stored cannot be selected.
• The image names are each displayed in 16...